Specifications
| Type | Description |
|---|---|
| Part Number | CSD95372BQ5M |
| Manufacturer | Texas Instruments |
| Product Type | LDO Regulator |
| Category | Power Management |
| Component Type | Power_IC |
| Package Case | SON / LSON-CLIP (DQP), 12 pins, 5 mm x 6 mm |
| Continuous Operating Current Capability | 60 A |
| System Efficiency | 93.4% |
| Power Loss | 2.8 W |
| Maximum Switching Frequency | 1.25 MHz |
| PWM Signal Compatibility | 3.3 V and 5 V compatible |
| Temperature Analog Output Voltage | 600 mV |
| Gate Drive Voltage | 4.5 to 5.5 V |
| Input Supply Voltage | 16 V max |
| Output Voltage | 5.5 V max |
| Continuous Output Current | 60 A |
| Peak Output Current | 90 A |
| Switching Frequency | 1250 kHz max |
| On-Time Duty Cycle | 85% max |
| Minimum PWM On-Time | 40 ns |
| Operating Temperature | -40 to 125°C |
| VIN to PGND Absolute Maximum | -0.3 to 25 V |
| VIN to VSW Absolute Maximum | -0.3 to 25 V |
| VIN to VSW Transient Absolute Maximum | -7 to 27 V |
| VSW to PGND Absolute Maximum | -0.3 to 20 V |
| VSW to PGND Transient Absolute Maximum | -7 to 23 V |
| VDD to PGND Absolute Maximum | -0.3 to 7 V |
| Logic and Analog Pin Absolute Maximum | -0.3 V to VDD + 0.3 V |
| BOOT to BOOT_R Absolute Maximum | -0.3 V to VDD + 0.3 V; should not exceed 7 V |
| Power Dissipation Absolute Maximum | 12 W |
| Operating Junction Temperature Absolute Maximum | -55 to 150°C |
| Storage Temperature Range | -55 to 150°C |
| ESD Rating Human Body Model | -2000 to 2000 V |
| ESD Rating Charged Device Model | -500 to 500 V |
| Junction-to-Case Thermal Resistance | 15°C/W typ |
| Junction-to-Board Thermal Resistance | 1.5°C/W typ |
| Bootstrap Capacitor Requirement | 0.1 µF minimum, 16 V X7R ceramic |
| ENABLE Internal Pulldown | 100 kΩ |
| FCCM Internal Pullup Current | 5 µA |
| TAO Bypass Capacitor | 1 nF, 16 V X7R ceramic |
| Thermal Shutdown Fault Output | TAO pulled up to 3.3 V |
| Application Input Voltage | 12 V |
| Application Output Voltage | 1.2 V |
| Application Gate Drive Voltage | 5 V |
| Application Output Inductance | 0.225 µH |
| Application Switching Frequency | 500 kHz |
| Application Ambient Temperature | 25°C |
| Package Quantity | 2500 units |
| Package Quantity | 250 units |
| Package Body Dimension A | 1.400 mm min, 1.450 mm nom, 1.500 mm max |
| Package Body Dimension E | 5.900 mm min, 6.000 mm nom, 6.100 mm max |
| Package Body Dimension E1 | 4.900 mm min, 5.000 mm nom, 5.100 mm max |
| Package Dimension D2 | 5.300 mm min, 5.400 mm nom, 5.500 mm max |
| Package Pin Pitch | 0.500 mm typ |
| Stencil Thickness | 100 µm |
| Orderable Package | LSON-CLIP (DQP), 12 pins |
| MSL Rating | Level-2-260C-1 YEAR |
| Part Marking | 95372BM |
| Datasheet Status | request_only |
Product Overview
The device operates from a recommended 4.5 to 5.5 V VDD gate-drive supply, with VIN up to 16 V and VOUT up to 5.5 V. It supports a maximum switching frequency of 1250 kHz with a minimum 0.1 µF bootstrap capacitor and allows up to 85% on-time duty cycle at 1 MHz. The PWM input is compatible with 3.3 V and 5 V signaling.
Key Features
- 60 A continuous operating current capability
- 93.4% system efficiency at IOUT=30 A
- 2.8 W power loss at IOUT=30 A
- Maximum switching frequency up to 1.25 MHz
- 3.3 V and 5 V compatible PWM input
- 4.5 to 5.5 V recommended VDD range
- 16 V maximum recommended VIN operation
- 90 A peak output current under specified pulse conditions
- -40 to 125°C recommended operating temperature
- TAO fault output pulls up during thermal shutdown
Typical Applications
- 12 V to 1.2 V buck conversion
- 500 kHz synchronous buck power stages
- High-current 60 A output rails
- 3.3 V or 5 V PWM control systems
- Designs using 0.225 µH output inductance
- Thermally monitored power-stage layouts
Procurement Notes
When requesting a quote for CSD95372BQ5M, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For power IC and power device sourcing, voltage rating, current rating, power dissipation, package thermal performance, protection features, qualification grade and application conditions should be reviewed before approval.
FAQ
What current capability is specified for CSD95372BQ5M?
CSD95372BQ5M has a 60 A continuous operating current capability. The datasheet also specifies 60 A continuous output current under VIN=12 V, VDD=5 V, VOUT=1.2 V, fSW=500 kHz, and LOUT=0.225 µH conditions.
What package is used for CSD95372BQ5M?
The part uses a SON / LSON-CLIP (DQP), 12-pin package with a 5 mm x 6 mm package description. The orderable package is listed as LSON-CLIP (DQP), 12 pins.
What switching frequency range information is provided?
The extracted datasheet facts list a 1.25 MHz maximum switching frequency for high-frequency operation and a 1250 kHz maximum switching frequency condition when CBST is at least 0.1 µF.
What bootstrap capacitor does the device require?
The bootstrap capacitor requirement is 0.1 µF minimum, 16 V X7R ceramic, connected from BOOT to BOOT_R. The switching-frequency specification also references CBST=0.1 µF minimum.
What operating temperature range is recommended?
The recommended operating temperature range is -40 to 125°C. Separate absolute maximum ratings list operating junction temperature from -55 to 150°C and storage temperature from -55 to 150°C.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 13, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.