Specifications
| Type | Description |
|---|---|
| Part Number | DRV5013 |
| Manufacturer | Texas Instruments |
| Product Type | Digital-latch Hall effect sensor |
| Category | Sensor |
| Package / Case | DBZ (SOT-23, 3) 2.92 mm x 2.37 mm; LPE/LPG (TO-92, 3) 4 mm x 3.15 mm |
| Sensor Function | Digital bipolar-latch Hall sensor |
| Magnetic Sensitivity Stability | BOP +/-10% over temperature |
| Supply Voltage Range | 2.5 V to 38 V |
| Output Type | Open-drain output |
| Output Sink Current | 0 mA to 30 mA |
| Output Pin Voltage | 0 V to 38 V |
| Operating Ambient Temperature | -40°C to 125°C |
| Operating Ambient Temperature | -40°C to 150°C |
| Power-On Time | 35 us typ, 50 us max |
| Power-On Time | 35 us typ, 70 us max |
| Operating Supply Current | 1.5 mA typ |
| Operating Supply Current | 1.5 mA typ, 3.2 mA max |
| Operating Supply Current | 2.7 mA typ |
| Operating Supply Current | 3 mA typ, 3.5 mA max |
| FET On-Resistance | 22 ohm typ |
| FET On-Resistance | 36 ohm typ, 50 ohm max |
| Off-State Leakage Current | 1 uA max |
| Reverse Supply Voltage Protection | -22 V |
| Overcurrent Protection Level | 15 mA min, 30 mA typ, 45 mA max |
| Output Delay Time | 13 us typ, 25 us max |
| Output Rise Time | 200 ns typ |
| Output Fall Time | 31 ns typ |
| Magnetic Bandwidth | 20 kHz min, 30 kHz typ |
| DRV5013FA/FD Operate Point | -0.6 mT min, 1.3 mT typ, 3.4 mT max |
| DRV5013FA/FD Release Point | -3.4 mT min, -1.3 mT typ, 0.6 mT max |
| DRV5013AD Operate Point | 1 mT min, 2.7 mT typ, 5 mT max |
| DRV5013AD Release Point | -5 mT min, -2.7 mT typ, -1 mT max |
| DRV5013AG Operate Point | 3 mT min, 6 mT typ, 9 mT max |
| DRV5013AG Release Point | -9 mT min, -6 mT typ, -3 mT max |
| DRV5013BC Operate Point | 6 mT min, 12 mT typ, 18 mT max |
| DRV5013BC Release Point | -18 mT min, -12 mT typ, -6 mT max |
| ESD Rating HBM | +/-2500 V |
| ESD Rating CDM | +/-500 V |
| Datasheet Status | request_only |
Product Overview
Package options include DBZ SOT-23, 3 at 2.92 mm x 2.37 mm and LPE/LPG TO-92, 3 at 4 mm x 3.15 mm. Temperature designators cover -40°C to 125°C for Q versions and -40°C to 150°C for E versions. The device includes reverse supply voltage protection to -22 V and overcurrent protection specified at 15 mA minimum, 30 mA typical, and 45 mA maximum when OUT is shorted to VCC.
Switching and magnetic specifications support latch-based magnetic sensing. Magnetic bandwidth is 20 kHz minimum and 30 kHz typical, while output delay is 13 us typical and 25 us maximum under the stated magnetic transition condition. Device versions define operate and release points, ranging from FA/FD low thresholds to BC higher thresholds.
Key Features
- Digital bipolar-latch Hall sensor function
- BOP magnetic sensitivity stability within +/-10% over temperature
- 2.5 V to 38 V recommended supply range
- Open-drain output requires external pullup resistor
- OUT pin supports 0 V to 38 V operation
- Output sink current range is 0 mA to 30 mA
- -40°C to 150°C operating ambient option
- 20 kHz minimum, 30 kHz typical magnetic bandwidth
- 13 us typical output delay time
- Reverse supply voltage protection to -22 V
Typical Applications
- Magnetic bipolar-latch sensing
- Magnetic field detection
- Position-state detection
- Open-drain sensor outputs
- Wide-supply sensor circuits
- High-temperature sensor assemblies
Procurement Notes
When requesting a quote for DRV5013, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For MCU, processor and logic IC sourcing, package, operating voltage, temperature grade, speed or frequency grade, firmware or mask version, lifecycle status and programming requirements should be checked before approval.
FAQ
What type of sensor is the DRV5013?
The DRV5013 is a Texas Instruments digital-latch Hall effect sensor. The extracted device facts identify its sensor function as a digital bipolar-latch Hall sensor.
What supply voltage range does DRV5013 support?
The recommended operating supply voltage range for DRV5013 is 2.5 V to 38 V. This range is specified under the recommended operating conditions in the extracted datasheet facts.
What output interface does the DRV5013 use?
DRV5013 uses an open-drain output and requires an external pullup resistor. The OUT pin is specified for 0 V to 38 V and 0 mA to 30 mA sink current operation.
Which packages are listed for DRV5013?
The extracted package facts list DBZ SOT-23, 3 with 2.92 mm x 2.37 mm dimensions and LPE/LPG TO-92, 3 with 4 mm x 3.15 mm dimensions.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 12, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.