Specifications
| Type | Description |
|---|---|
| Part Number | DRV8876 |
| Manufacturer | Texas Instruments |
| Product Type | LDO Regulator |
| Category | Power Management |
| Component Type | Power_IC |
| Package / Case | 16-pin VQFN with exposed thermal pad, 3.00 mm x 3.00 mm; 16-pin HTSSOP with exposed thermal pad, 5.00 mm x 4.40 mm |
| Operating Supply Voltage | 4.5 to 37 V |
| Peak Output Current | 3.5 A |
| RDS(on) | 700 mΩ |
| High-side MOSFET On Resistance | 350 mΩ typ, 420 mΩ max |
| Low-side MOSFET On Resistance | 350 mΩ typ, 420 mΩ max |
| Sleep Mode Current | 0.75 µA typ, 1 µA max |
| Sleep Mode Current | 5 µA max |
| Active Mode Current | 3 mA typ, 7 mA max |
| Turn-on Time | 1 ms typ |
| Turn-off Time | 1 ms typ |
| Charge Pump Regulator Voltage | 5 V typ |
| Charge Pump Switching Frequency | 400 kHz typ |
| PWM Frequency | 0 to 100 kHz |
| Logic Input Voltage | 0 to 5.5 V |
| Input Logic Low Voltage | 0 to 0.7 V |
| Input Logic Low Voltage | 0 to 0.8 V |
| Input Logic High Voltage | 1.5 to 5.5 V |
| Input Hysteresis | 200 mV typ |
| nSLEEP Input Hysteresis | 50 mV typ |
| Input Pulldown Resistance | 100 kΩ typ |
| Open Drain Pullup Voltage | 0 to 5.5 V |
| Open Drain Output Current | 0 to 5 mA |
| nFAULT Output Logic Low Voltage | 0.3 V max |
| nFAULT Output Logic High Current | -2 to 2 µA |
| Current Sense Output Current | 0 to 3 mA |
| Current Limit Reference Voltage | 0 to 3.6 V |
| Current Mirror Scaling Factor | 1000 µA/A |
| Current Mirror Scaling Error | -7.5 to 7.5 mA |
| Current Mirror Scaling Error | -5% to 5% |
| Current Mirror Scaling Error | -4% to 4% |
| Current Mirror Scaling Error | -5% to 5% |
| Current Mirror Scaling Error | -6.5% to 6.5% |
| Current Regulation Off Time | 25 µs typ |
| Current Sense Delay Time | 1.6 µs typ |
| Current Regulation Deglitch Time | 0.6 µs typ |
| Current Regulation Blanking Time | 1.1 µs typ |
| Output Rise Time | 150 ns typ |
| Output Fall Time | 150 ns typ |
| Input to Output Propagation Delay | 650 ns typ |
| Output Dead Time | 300 ns typ |
| Body Diode Forward Voltage | 0.9 V typ |
| Supply Undervoltage Lockout Rising Threshold | 4.3 V min, 4.45 V typ, 4.6 V max |
| Supply Undervoltage Lockout Falling Threshold | 4.2 V min, 4.35 V typ, 4.5 V max |
| Supply UVLO Hysteresis | 100 mV typ |
| Supply Undervoltage Deglitch Time | 10 µs typ |
| Charge Pump Undervoltage Lockout | 2.25 V typ |
| Overcurrent Protection Trip Point | 3.5 A min, 5.5 A max |
| Overcurrent Protection Deglitch Time | 3 µs typ |
| Overcurrent Protection Retry Time | 2 ms typ |
| Operating Ambient Temperature | -40 to 125°C |
| Operating Junction Temperature | -40 to 150°C |
| Junction-to-Ambient Thermal Resistance | 45.9°C/W |
| Junction-to-Ambient Thermal Resistance | 44.3°C/W |
| Absolute Maximum VM Pin Voltage | -0.3 to 40 V |
| Absolute Maximum Logic Pin Voltage | -0.3 to 5.75 V |
| ESD Rating HBM | ±2000 V |
| ESD Rating CDM | ±500 V |
| Datasheet Status | request_only |
Product Overview
DRV8876 is a Texas Instruments H-bridge motor driver in the Power_Management category. The device uses a VM supply input rated for 4.5 to 37 V operation and drives OUT1 and OUT2 with 3.5 A peak output current, subject to power dissipation and thermal limits. For DRV8876, the high-side plus low-side total RDS(on) is specified as 700 mΩ, with each MOSFET listed at 350 mΩ typical under the stated 24 V, 1 A, 25°C conditions.
Control and monitoring functions include EN/IN1 and PH/IN2 PWM inputs from 0 to 100 kHz, logic inputs up to 5.5 V, nSLEEP control, open-drain nFAULT output, VREF current-limit input, and IPROPI current-sense output. Current mirror scaling is specified at 1000 µA/A with multiple error limits over output-current, package, supply-voltage, and junction-temperature ranges.
Package options are a 16-pin VQFN with exposed thermal pad measuring 3.00 mm x 3.00 mm and a 16-pin HTSSOP with exposed thermal pad measuring 5.00 mm x 4.40 mm. Recommended operating temperature ranges are -40 to 125°C ambient and -40 to 150°C junction.
Key Features
- 4.5 to 37 V VM supply input range
- 3.5 A peak OUT1 and OUT2 current rating
- 700 mΩ total high-side plus low-side RDS(on)
- 0 to 100 kHz EN/IN1 and PH/IN2 PWM range
- 0.75 µA typical sleep current at 24 V condition
- IPROPI current mirror scaling factor of 1000 µA/A
- Open-drain nFAULT output supports 0 to 5.5 V pullup
- Overcurrent protection trip point from 3.5 A to 5.5 A
- -40 to 150°C recommended junction temperature range
- 16-pin VQFN and HTSSOP packages with exposed thermal pads
Typical Applications
- Brushed DC motor drive
- Bidirectional motor control
- PWM-controlled actuator drive
- Current-regulated motor stages
- Sleep-controlled battery systems
- Fault-monitored motor outputs
- Power-management motor modules
Procurement Notes
When requesting a quote for DRV8876, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For power IC and power device sourcing, voltage rating, current rating, power dissipation, package thermal performance, protection features, qualification grade and application conditions should be reviewed before approval.
FAQ
What supply voltage range does DRV8876 support?
DRV8876 supports a VM supply input operating range of 4.5 to 37 V. The absolute maximum VM pin voltage is specified separately as -0.3 to 40 V for the power supply pin.
What output current is specified for DRV8876?
The extracted datasheet facts specify 3.5 A peak output current for OUT1 and OUT2. The condition notes that power dissipation and thermal limits must be observed when using this current rating.
Which packages are listed for DRV8876?
DRV8876 is listed in a 16-pin VQFN with exposed thermal pad measuring 3.00 mm x 3.00 mm and a 16-pin HTSSOP with exposed thermal pad measuring 5.00 mm x 4.40 mm.
How does DRV8876 provide current-sense information?
DRV8876 includes an IPROPI current-sense output. The current-sense output current range is 0 to 3 mA, and the current mirror scaling factor is specified as 1000 µA/A.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 8, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.