Specifications
| Type | Description |
|---|---|
| Part Number | TLV3202 |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Inferred Category | Signal_Chain |
| Component Type | Other |
| Package Case | 8-pin SOIC (D), 4.90 mm × 3.91 mm; 8-pin VSSOP (DGK), 3.00 mm × 3.00 mm |
| Number of Channels | 2; TLV3202 device variant |
| Output Type | Push-pull; TLV3202 |
| Supply Voltage Range | 2.7 to 5.5 V; recommended operating condition |
| Specified Temperature Range | -40 to 125 °C; operating free-air temperature range |
| Absolute Maximum Supply Voltage | 7 V; absolute maximum rating |
| Signal Input Pin Voltage | -0.5 to VCC + 0.5 V; absolute maximum rating |
| Signal Input Pin Current | -10 to 10 mA; input pins diode-clamped to supply rails |
| Output Short-Circuit Current | 100 mA; short-circuit to ground, absolute maximum rating |
| Junction Temperature | 150 °C; absolute maximum rating |
| Storage Temperature Range | -65 to 150 °C; absolute maximum rating |
| HBM ESD Rating | ±2000 V; per ANSI/ESDA/JEDEC JS-001 |
| CDM ESD Rating | ±1000 V; TLV3202, per JEDEC JESD22-C101 |
| Junction-to-Ambient Thermal Resistance, SOIC | 143.6 °C/W; TLV3202, 8-pin SOIC package |
| Junction-to-Ambient Thermal Resistance, VSSOP | 201.9 °C/W; TLV3202, 8-pin VSSOP package |
| Input Offset Voltage, 5 V, 25°C | typ 1 mV, max 5 mV; TLV3202, VCC = 5 V, VCM = VCC/2, TA = 25°C |
| Input Offset Voltage, 5 V, Full Temperature | max 6 mV; TLV3202, VCC = 5 V, VCM = VCC/2, TA = -40°C to 125°C |
| Input Offset Voltage Drift | typ 1 µV/°C, max 10 µV/°C; VCC = 5 V, TA = -40°C to 125°C |
| Power-Supply Rejection Ratio | min 65 dB, typ 85 dB; VCM = VCC/2, VCC = 2.5 V to 5.5 V |
| Input Hysteresis | typ 1.2 mV; VCC = 5 V |
| Input Bias Current, 25°C | typ 1 pA, max 50 pA; VCC = 5 V, VCM = VCC/2, TA = 25°C |
| Input Bias Current, Full Temperature | max 5 nA; VCC = 5 V, VCM = VCC/2, TA = -40°C to 125°C |
| Input Offset Current, 25°C | typ 1 pA, max 50 pA; VCC = 5 V, VCM = VCC/2, TA = 25°C |
| Input Offset Current, Full Temperature | max 2.5 nA; VCC = 5 V, VCM = VCC/2, TA = -40°C to 125°C |
| Input Common-Mode Voltage Range | VEE - 0.2 to VCC + 0.2 V; TA = -40°C to 125°C |
| Common-Mode Rejection Ratio, 5 V | min 60 dB, typ 70 dB; VCC = 5 V, -0.2 V < VCM < 5.2 V |
| Common-Mode Input Impedance | 10^13 Ω || 2 pF; VCC = 5 V |
| Differential Input Impedance | 10^13 Ω || 4 pF; VCC = 5 V |
| Low-Level Output Swing, 5 V, 25°C | typ 175 mV, max 190 mV; VCC = 5 V, ISINK = 4 mA, TA = 25°C |
| Low-Level Output Swing, 5 V, Full Temperature | max 225 mV; VCC = 5 V, ISINK = 4 mA, TA = -40°C to 125°C |
| High-Level Output Swing, 5 V, 25°C | typ 120 mV, max 140 mV; VCC = 5 V, ISOURCE = 4 mA, TA = 25°C |
| High-Level Output Swing, 5 V, Full Temperature | max 170 mV; VCC = 5 V, ISOURCE = 4 mA, TA = -40°C to 125°C |
| Short-Circuit Current Sinking, 5 V | typ 40 mA, max 48 mA; VCC = 5 V, per comparator |
| Short-Circuit Current Sourcing, 5 V | typ 52 mA, max 60 mA; VCC = 5 V, per comparator |
| Quiescent Current, 5 V, 25°C | typ 40 µA, max 50 µA; VCC = 5 V, TA = 25°C |
| Quiescent Current, 5 V, Full Temperature | max 65 µA; VCC = 5 V, TA = -40°C to 125°C |
| Propagation Delay, 5 V, Low-to-High, 20 mV | typ 47 ns, max 50 ns; VCC = 5 V, CL = 15 pF |
| Propagation Delay, 5 V, Low-to-High, 100 mV | typ 43 ns, max 50 ns; VCC = 5 V, CL = 15 pF |
| Propagation Delay, 5 V, Low-to-High, Full Temperature | max 55 ns; VCC = 5 V, TA = -40°C to 125°C |
| Propagation Delay, 5 V, High-to-Low, 20 mV | typ 45 ns, max 50 ns; VCC = 5 V, CL = 15 pF |
| Propagation Delay, 5 V, High-to-Low, 100 mV | typ 42 ns, max 50 ns; VCC = 5 V, CL = 15 pF |
| Propagation Delay Skew, 5 V | typ 2 ns; VCC = 5 V, input overdrive = 20 mV, CL = 15 pF |
| Rise Time, 5 V | typ 2.9 ns; VCC = 5 V, 10% to 90% |
| Fall Time, 5 V | typ 3.7 ns; VCC = 5 V, 10% to 90% |
| Input Offset Voltage, 2.7 V, 25°C | typ 1 mV, max 5 mV; TLV3202, VCC = 2.7 V, VCM = VCC/2, TA = 25°C |
| Input Offset Voltage, 2.7 V, Full Temperature | max 6 mV; TLV3202, VCC = 2.7 V, VCM = VCC/2, TA = -40°C to 125°C |
| Common-Mode Rejection Ratio, 2.7 V | min 56 dB, typ 68 dB; VCC = 2.7 V, -0.2 V < VCM < 2.9 V |
| Low-Level Output Swing, 2.7 V, 25°C | typ 230 mV, max 260 mV; VCC = 2.7 V, ISINK = 4 mA, TA = 25°C |
| Low-Level Output Swing, 2.7 V, Full Temperature | max 325 mV; VCC = 2.7 V, ISINK = 4 mA, TA = -40°C to 125°C |
| High-Level Output Swing, 2.7 V, 25°C | typ 210 mV, max 250 mV; VCC = 2.7 V, ISOURCE = 4 mA, TA = 25°C |
| High-Level Output Swing, 2.7 V, Full Temperature | max 350 mV; VCC = 2.7 V, ISOURCE = 4 mA, TA = -40°C to 125°C |
| Short-Circuit Current Sinking, 2.7 V | typ 13 mA, max 19 mA; VCC = 2.7 V, per comparator |
| Short-Circuit Current Sourcing, 2.7 V | typ 15 mA, max 21 mA; VCC = 2.7 V, per comparator |
| Quiescent Current, 2.7 V, 25°C | typ 36 µA, max 46 µA; VCC = 2.7 V, TA = 25°C |
| Quiescent Current, 2.7 V, Full Temperature | max 60 µA; VCC = 2.7 V, TA = -40°C to 125°C |
| Propagation Delay, 2.7 V, Low-to-High, 20 mV | typ 47 ns, max 50 ns; VCC = 2.7 V, CL = 15 pF |
| Propagation Delay, 2.7 V, Low-to-High, 100 mV | typ 42 ns, max 50 ns; VCC = 2.7 V, CL = 15 pF |
| Propagation Delay, 2.7 V, High-to-Low, 20 mV | typ 40 ns, max 50 ns; VCC = 2.7 V, CL = 15 pF |
| Propagation Delay, 2.7 V, High-to-Low, 100 mV | typ 38 ns, max 50 ns; VCC = 2.7 V, CL = 15 pF |
| Propagation Delay Skew, 2.7 V | typ 2 ns; VCC = 2.7 V, input overdrive = 20 mV, CL = 15 pF |
| Rise Time, 2.7 V | typ 4.8 ns; VCC = 2.7 V, 10% to 90% |
| Fall Time, 2.7 V | typ 5.2 ns; VCC = 2.7 V, 10% to 90% |
| Datasheet Source | Manufacturer technical datasheet |
| Datasheet Status | request_only |
Product Overview
The TLV3202 is a Texas Instruments dual push-pull comparator in the Signal_Chain category. The TLV3202 variant provides two channels with push-pull outputs and is intended for operation across a 2.7 to 5.5 V recommended supply range. Its operating free-air temperature range is specified from -40 to 125 °C.
Electrical characteristics are defined at both 5 V and 2.7 V supply conditions. At 5 V and 25°C, the device has 1 mV typical and 5 mV maximum input offset voltage, 1 pA typical input bias current, 1.2 mV typical input hysteresis, and 40 µA typical quiescent current. Propagation delay is specified with 15 pF load conditions, including 47 ns typical low-to-high delay at 20 mV overdrive for both 5 V and 2.7 V operation.
The package options are 8-pin SOIC (D), measuring 4.90 mm × 3.91 mm, and 8-pin VSSOP (DGK), measuring 3.00 mm × 3.00 mm. Thermal resistance is specified as 143.6 °C/W for the SOIC package and 201.9 °C/W for the VSSOP package.
Key Features
- Dual comparator with 2 channels
- Push-pull output configuration
- Recommended 2.7 to 5.5 V supply range
- Specified -40 to 125 °C free-air operation
- Typical 1 mV input offset voltage at 25°C
- Typical 1.2 mV input hysteresis at 5 V
- Typical 40 µA quiescent current at 5 V
- Low-to-high delay typ 47 ns at 20 mV overdrive
- Input common-mode range VEE - 0.2 to VCC + 0.2 V
- Available in 8-pin SOIC and 8-pin VSSOP packages
Typical Applications
- Signal threshold detection
- Voltage level comparison
- Dual-channel comparator circuits
- Low-current signal monitoring
- Window comparator circuits
- Push-pull logic output stages
- Rail-adjacent input sensing
Procurement Notes
When requesting a quote for TLV3202, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
How many comparator channels does TLV3202 provide?
The TLV3202 device variant provides 2 channels. The extracted product type identifies it as a dual push-pull comparator from Texas Instruments in the Signal_Chain category.
What supply voltage range is recommended for TLV3202?
The recommended operating supply voltage range for TLV3202 is 2.7 to 5.5 V. The absolute maximum supply voltage rating is 7 V and should not be treated as a normal operating condition.
Which package options are listed for TLV3202?
The listed package options are 8-pin SOIC (D), measuring 4.90 mm × 3.91 mm, and 8-pin VSSOP (DGK), measuring 3.00 mm × 3.00 mm.
What propagation delay values are specified at 2.7 V?
At VCC = 2.7 V and CL = 15 pF, specified typical propagation delays include 47 ns low-to-high at 20 mV overdrive, 42 ns low-to-high at 100 mV, 40 ns high-to-low at 20 mV, and 38 ns high-to-low at 100 mV.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 7, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.