TPS22916 Single-Channel Load Switch

Specifications

Product Overview

TPS22916 is a Texas Instruments single-channel load switch for Power_Management designs using a 1 to 5.5 V input operating range and 0 to 5.5 V output range. The switch is rated for 2 A maximum continuous switch current and 2.5 A pulsed switch current under pulses below 300 us at 2% duty cycle.

The device is supplied in a 4-pin YFP WCSP package with a 0.78 mm x 0.78 mm nominal body, 0.4 mm pitch, and 0.5 mm height. Pin functions are VOUT at A1, VIN at A2, GND at B1, and ON digital enable input at B2. The package thermal data includes 193 °C/W junction-to-ambient resistance, 2.3 °C/W junction-to-case top resistance, and 36 °C/W junction-to-board resistance.

Family options include active-high TPS22916B/C/CN and active-low TPS22916BL/CL/CNL enable configurations. B and BL variants use fast timing, while C, CN, CL, and CNL use slow timing. Quick output discharge is available on B, BL, C, and CL variants and is not available on CN or CNL variants.

Key Features

• Single-channel load switch for Power_Management applications
• 1 to 5.5 V recommended input operating range
• 0 to 5.5 V recommended output voltage range
• 2 A maximum continuous switch current rating
• Active-high and active-low enable variants available
• Fast and slow timing device options
• Quick output discharge on B, BL, C, CL variants
• Reverse current blocking with 10 us typical activation time
• 4-pin YFP WCSP package, 0.78 mm square body
• -40 to 85 °C operating free-air temperature

Typical Applications

• 1 to 5.5 V rail switching
• Power switch output control
• Digital enable load switching
• Active-high enable power paths
• Active-low enable power paths
• Fast turn-on load switching
• Slow turn-on load switching
• Reverse-current blocking power paths
• Quick output discharge designs

Procurement Notes

When requesting a quote for TPS22916, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For power IC and power device sourcing, voltage rating, current rating, power dissipation, package thermal performance, protection features, qualification grade and application conditions should be reviewed before approval.