Specifications
| Type | Description |
|---|---|
| Part Number | VO0600T |
| Manufacturer | Vishay |
| Product Type | High Speed Optocoupler |
| Category | Optocouplers |
| Package / Case | SOIC-8, 6.1 mm |
| Component Type | Other |
| Channel Count | 1 channel; VO0600T single-channel device |
| Data Rate | 10 MBd typical; high speed optocoupler family |
| Output Type | Open drain NMOS transistor output; detector output |
| CMR Performance | 1 kV/us; VO0600T ordering option / common mode transient immunity class |
| Logic Compatibility | +5 V CMOS compatible; device feature |
| Operating Temperature Range | -40 to +100 °C; guaranteed AC and DC performance over temperature |
| Recommended Bypass Capacitor | 0.1 uF; connected between pin 5 and pin 8 |
| Agency Approval | UL, cUL; VO0600T SOIC-8 ordering table |
| Logic Truth Table Output | L; LED on, enable H; single-channel positive logic |
| Logic Truth Table Output | H; LED off, enable H; single-channel positive logic |
| Logic Truth Table Output | H; LED on, enable L; single-channel positive logic |
| Logic Truth Table Output | H; LED off, enable L; single-channel positive logic |
| Logic Truth Table Output | L; LED on, enable NC; single-channel positive logic |
| Logic Truth Table Output | H; LED off, enable NC; single-channel positive logic |
| Absolute Maximum Average Forward Current | 20 mA; input, single channel, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Reverse Input Voltage | 5 V; input, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Enable Input Voltage | VCC + 0.5 V; single channel, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Enable Input Current | 5 mA; single channel, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Surge Current | 200 mA; t=100 us, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Input Power Dissipation | 35 mW; single channel, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Supply Voltage | 7 V; output, 1 min maximum, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Output Current | 50 mA; output, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Output Voltage | 7 V; output, Tamb=25 °C unless otherwise specified |
| Absolute Maximum Output Power Dissipation | 85 mW; single channel output, Tamb=25 °C unless otherwise specified |
| Isolation Test Voltage | 4000 VRMS; t=1 s |
| Storage Temperature | -55 to +150 °C; absolute maximum rating |
| Operating Temperature | -40 to +100 °C; absolute maximum rating |
| Lead Solder Temperature | 260 °C; for 10 s |
| Solder Reflow Temperature | 260 °C; for 1 min; refer to reflow profile |
| Recommended Operating Temperature | -40 to +100 °C; recommended operating condition |
| Recommended Supply Voltage | 4.5 to 5.5 V; recommended operating condition |
| Input Current Low Level | 0 to 250 uA; recommended operating condition |
| Input Current High Level | 5 to 15 mA; recommended operating condition |
| Output Pull-Up Resistor | 330 ohm to 4 kohm; recommended operating condition |
| Logic High Enable Voltage | 2 V to VCC; recommended operating condition |
| Logic Low Enable Voltage | 0.0 to 0.8 V; recommended operating condition |
| Fanout | 5 max; RL=1 kohm |
| Input Forward Voltage | 1.1 V min, 1.4 V typ, 1.7 V max; IF=10 mA, Tamb=25 °C unless otherwise specified |
| Reverse Current | 0.01 uA typ, 10 uA max; VR=5 V, Tamb=25 °C unless otherwise specified |
| Input Capacitance | 55 pF typ; f=1 MHz, VF=0 V, Tamb=25 °C unless otherwise specified |
| High Level Supply Current | 4.1 mA typ, 7 mA max; single channel, VE=0.5 V, IF=0 mA |
| High Level Supply Current | 3.3 mA typ, 6 mA max; single channel, VE=VCC, IF=0 mA |
| Low Level Supply Current | 4 mA typ, 7 mA max; single channel, VE=0.5 V, IF=10 mA |
| Low Level Supply Current | 3.3 mA typ, 6 mA max; single channel, VE=VCC, IF=10 mA |
| High Level Output Current | 0.002 uA typ, 1 uA max; VE=2 V, VO=5.5 V, IF=250 uA |
| Low Level Output Voltage | 0.2 V typ, 0.6 V max; VE=2 V, IF=5 mA, IOL sinking=13 mA |
| Input Threshold Current | 2.4 mA typ, 5 mA max; VE=2 V, VO=5.5 V, IOL sinking=13 mA |
| High Level Enable Current | 0.6 mA typ, 1.6 mA max; Tamb=25 °C unless otherwise specified |
| Low Level Enable Current | 0.8 mA typ, 1.6 mA max; Tamb=25 °C unless otherwise specified |
| High Level Enable Voltage | 2 V min; Tamb=25 °C unless otherwise specified |
| Low Level Enable Voltage | 0.8 V max; Tamb=25 °C unless otherwise specified |
| Propagation Delay Time to High Output Level | 20 ns min, 48 ns typ, 100 ns max; RL=350 ohm, CL=15 pF, TA=-40 to +100 °C, VCC=5 V, IF=7.5 mA unless otherwise specified |
| Propagation Delay Time to Low Output Level | 25 ns min, 50 ns typ, 100 ns max; RL=350 ohm, CL=15 pF, TA=-40 to +100 °C, VCC=5 V, IF=7.5 mA unless otherwise specified |
| Pulse Width Distortion | 2.9 ns typ, 35 ns max; RL=350 ohm, CL=15 pF, |tPHL - tPLH| |
| Propagation Delay Skew | 8 ns typ, 40 ns max; RL=350 ohm, CL=15 pF |
| Output Rise Time | 23 ns typ; 10 % to 90 %, RL=350 ohm, CL=15 pF |
| Output Fall Time | 7 ns typ; 90 % to 10 %, RL=350 ohm, CL=15 pF |
| Enable Propagation Delay ELH | 12 ns typ; RL=350 ohm, CL=15 pF, VEL=0 V, VEH=3 V |
| Enable Propagation Delay EHL | 11 ns typ; RL=350 ohm, CL=15 pF, VEL=0 V, VEH=3 V |
| Common Mode Transient Immunity High | 1000 V/us min; VO0600T, |VCM|=10 V, VCC=5 V, IF=0 mA, VO(min)=2 V, RL=350 ohm, Tamb=25 °C |
| Common Mode Transient Immunity Low | 1000 V/us min; VO0600T, |VCM|=10 V, VCC=5 V, IF=7.5 mA, VO(max)=0.8 V, RL=350 ohm, Tamb=25 °C |
| Climatic Classification | 55 / 100 / 21; according to IEC 68 part 1 |
| Comparative Tracking Index | 175 min, 399 max; CTI safety and insulation rating |
| Maximum Transient Isolation Voltage | 6000 V min; VIOTM safety and insulation rating |
| Maximum Repetitive Peak Isolation Voltage | 560 V min; VIORM safety and insulation rating |
| Safety Limiting Power | 350 mW max; PSO safety and insulation rating |
| Safety Limiting Current | 150 mA max; ISI safety and insulation rating |
| Safety Limiting Temperature | 165 °C max; TSI safety and insulation rating |
| Creepage | 4 mm min; safety and insulation rating |
| Clearance | 4 mm min; safety and insulation rating |
| Insulation Thickness | 0.2 mm min; safety and insulation rating |
| Datasheet Status | request_only |
Product Overview
The VO0600T is a Vishay single-channel high speed optocoupler using an LED input and detector output with an open drain NMOS transistor output. The device is specified for 10 MBd typical operation and +5 V CMOS-compatible logic, with recommended supply voltage from 4.5 to 5.5 V and recommended operating temperature from -40 to +100 °C.
The part is supplied in an SOIC-8, 6.1 mm package and includes an enable input. With enable high or not connected, the positive-logic output is low when the LED is on and high when the LED is off. With enable low, the output remains high for both LED-on and LED-off states. A 0.1 uF bypass capacitor is recommended between pin 5 and pin 8.
Electrical limits include 20 mA absolute maximum average forward current, 5 V reverse input voltage, 7 V maximum supply and output voltage, and 50 mA maximum output current. Isolation and insulation data include 4000 VRMS test voltage, 6000 V minimum transient isolation voltage, 4 mm minimum creepage, and 4 mm minimum clearance. These parameters support isolated 5 V logic interfaces, enable-gated digital isolation paths, and high speed open-drain signaling designs.
Key Features
- Single-channel high speed optocoupler architecture
- 10 MBd typical data-rate capability
- Open drain NMOS transistor detector output
- +5 V CMOS-compatible logic interface
- 4.5 to 5.5 V recommended supply range
- -40 to +100 °C recommended operation
- 1000 V/us minimum common-mode transient immunity
- 4000 VRMS isolation test voltage for 1 s
- 0.1 uF bypass capacitor between pins 5 and 8
- UL and cUL agency approval
Typical Applications
- Isolated 5 V logic interfaces
- High speed digital isolation
- Open-drain signal isolation
- Enable-controlled logic paths
- CMOS-compatible isolated links
- Systems requiring 4 mm creepage
- Circuits needing 10 MBd optocoupling
Procurement Notes
When requesting a quote for VO0600T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For optocoupler and isolation sourcing, isolation voltage, CTR or output type, package, creepage distance, temperature grade, agency approvals and soldering conditions should be verified before approval.
FAQ
What output stage does the VO0600T use?
The VO0600T uses an open drain NMOS transistor output on the detector side. A recommended output pull-up resistor range of 330 ohm to 4 kohm is specified under recommended operating conditions.
What supply range is recommended for VO0600T operation?
The recommended supply voltage range is 4.5 to 5.5 V. The device is also described as +5 V CMOS compatible, with guaranteed AC and DC performance over -40 to +100 °C.
How does the VO0600T enable input affect output logic?
For single-channel positive logic, enable high or not connected gives a low output when the LED is on and a high output when the LED is off. With enable low, the output is high for both LED states.
What isolation ratings are specified for the VO0600T?
The extracted datasheet facts list a 4000 VRMS isolation test voltage for 1 s, 6000 V minimum maximum transient isolation voltage, 560 V minimum repetitive peak isolation voltage, and 4 mm minimum creepage and clearance.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 28, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.