Specifications
| Type | Description |
|---|---|
| Part Number | W005G |
| Manufacturer | STMicroelectronics |
| Product Type | LDO Regulator |
| Category | Power Management |
| Manufacturer shown in datasheet | Vishay General Semiconductor; datasheet header; user-provided manufacturer says STMicroelectronics |
| Part Number Series | W005G; member of W005G/W01G/W02G/W04G/W06G/W08G/W10G series |
| Device Description | Glass passivated single-phase bridge rectifier |
| Circuit Configuration | Quad |
| Maximum Repetitive Peak Reverse Voltage | 50 V; W005G, VRRM |
| Maximum RMS Voltage | 35 V; W005G, VRMS |
| Maximum DC Blocking Voltage | 50 V; W005G, VDC |
| Maximum Average Forward Rectified Current | 1.5 A; 0.375 in / 9.5 mm lead length, TA=25°C, IF(AV) |
| Peak Forward Surge Current | 50 A; single sine-wave superimposed on rated load, IFSM |
| Fusing Rating | 10 A2s; t < 8.3 ms, I2t |
| Operating Junction Temperature Range | -55 to +150 °C; TJ |
| Storage Temperature Range | -55 to +150 °C; TSTG |
| Maximum Instantaneous Forward Voltage Per Diode | 1.0 V; IF=1.0 A, VF, TA=25°C |
| Maximum DC Reverse Current Per Diode at 25°C | 5.0 µA; rated DC blocking voltage, TA=25°C, IR |
| Maximum DC Reverse Current Per Diode at 125°C | 500 µA; rated DC blocking voltage, TA=125°C, IR |
| Typical Junction Capacitance Per Diode | 14 pF; 4.0 V, 1 MHz, CJ |
| Typical Thermal Resistance Junction-to-Ambient | 36 °C/W; 0.375 in / 9.5 mm lead length PCB mounting; PCB size 0.22 in x 0.22 in, RθJA |
| Typical Thermal Resistance Junction-to-Lead | 11 °C/W; 0.375 in / 9.5 mm lead length PCB mounting; PCB size 0.22 in x 0.22 in, RθJL |
| Package | WOG |
| Package Case Dimensions | WOG; body approx. 0.348-0.388 in x 0.308-0.348 in; height 0.160-0.220 in; lead length 1.0 in min |
| Case Flammability Rating | UL 94 V-0; molding compound |
| Terminal Finish | Silver plated leads; solderable per J-STD-002 and JESD 22-B102 |
| Solder Dip Rating | 275 °C max, 10 s; per JESD 22-B106 |
| UL Recognition | File number E54214 |
| Ordering Example Unit Weight | 1.12 g; preferred P/N W06G-E4/51 ordering information |
| Ordering Example Base Quantity | 100; preferred P/N W06G-E4/51, plastic bag delivery mode |
| Datasheet Status | request_only |
Product Overview
W005G is a Power_Management component identified in the extracted facts as a glass passivated single-phase bridge rectifier. It belongs to the W005G/W01G/W02G/W04G/W06G/W08G/W10G series and uses a quad circuit configuration for bridge rectification. The supplied manufacturer field is STMicroelectronics; the datasheet header in the extracted facts shows Vishay General Semiconductor.
For W005G, the electrical ratings include 50 V maximum repetitive peak reverse voltage, 35 V maximum RMS voltage, and 50 V maximum DC blocking voltage. The device is rated for 1.5 A maximum average forward rectified current at TA=25°C with 0.375 in / 9.5 mm lead length, plus 50 A peak forward surge current on a single sine-wave superimposed on rated load.
The WOG package has an approximate body size of 0.348-0.388 in by 0.308-0.348 in, height of 0.160-0.220 in, and minimum lead length of 1.0 in. Assembly-related facts include UL 94 V-0 molding compound, silver plated leads solderable per J-STD-002 and JESD 22-B102, and a solder dip rating of 275°C maximum for 10 s per JESD 22-B106.
Key Features
- Glass passivated single-phase bridge rectifier
- Quad bridge circuit configuration
- 50 V repetitive peak reverse voltage rating
- 35 V maximum RMS voltage rating
- 50 V maximum DC blocking voltage
- 1.5 A average forward rectified current
- 50 A peak forward surge current rating
- 1.0 V maximum forward voltage per diode
- WOG package with UL 94 V-0 case
- Silver plated leads solderable per cited standards
Typical Applications
- Single-phase AC rectification
- Low-voltage DC power inputs
- Bridge rectifier stages
- PCB-mounted power conversion
- Surge-rated rectifier circuits
- Equipment requiring UL recognized rectifiers
Procurement Notes
When requesting a quote for W005G, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For power IC and power device sourcing, voltage rating, current rating, power dissipation, package thermal performance, protection features, qualification grade and application conditions should be reviewed before approval.
FAQ
What type of component is W005G?
W005G is described in the extracted datasheet facts as a glass passivated single-phase bridge rectifier with a quad circuit configuration. It is categorized here under Power_Management.
What are the main voltage ratings for W005G?
For W005G, the extracted facts list 50 V maximum repetitive peak reverse voltage, 35 V maximum RMS voltage, and 50 V maximum DC blocking voltage.
What package information is provided for W005G?
The package is WOG, with an approximate body size of 0.348-0.388 in by 0.308-0.348 in, height of 0.160-0.220 in, and minimum lead length of 1.0 in.
What assembly and terminal facts are available?
The extracted facts specify UL 94 V-0 molding compound, silver plated leads, solderability per J-STD-002 and JESD 22-B102, and a solder dip rating of 275°C maximum for 10 s per JESD 22-B106.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 26, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.