Specifications
| Type | Description |
|---|---|
| Part Number | XL-2520SYGC-T |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 2.1 x 2.3 x 2.6 x Ø1.8 mm |
| Appearance Dimensions | 2.1 x 2.3 x 2.6 x Ø1.8 mm; L/W/H, per product characteristic |
| Luminous Color | Green light; product characteristic |
| Colloid / Lens | Water colloid / transparent colloid; product characteristic |
| Moisture Sensitivity Level | MSL 2; product characteristic |
| Maximum Power Dissipation | 50 mW; Ta=25°C |
| Maximum Continuous Forward Current | 20 mA; Ta=25°C |
| Peak Forward Current | 80 mA; Ta=25°C |
| Maximum Reverse Voltage | 5 V; Ta=25°C |
| Antistatic Ability | 2000 V; Ta=25°C |
| Operating Temperature Range | -20 to +85 °C; Ta=25°C absolute maximum ratings table |
| Storage Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum ratings table |
| Wave Soldering Condition | 240°C, ≤6 s; welding conditions |
| Manual Welding Condition | 300°C, 3 s; soldering point more than 2.0 mm from colloid bottom |
| Soldering Distance From Colloid Bottom | >2.0 mm; welding conditions |
| Luminous Intensity | 50 to 200 mcd; IF=20mA, Ta=25°C |
| Dominant Wavelength | 565 to 575 nm; IF=20mA, Ta=25°C |
| Peak Wavelength | 570 nm typ; IF=20mA, Ta=25°C |
| Forward Voltage | 1.8 to 2.4 V; IF=20mA, Ta=25°C |
| Half Wave Width | 15 nm typ; IF=20mA, Ta=25°C |
| Viewing Angle | 20° typ; 2θ1/2, IF=20mA, Ta=25°C |
| Reverse Current | ≤5 µA; VR=5V, Ta=25°C |
| Brightness Grade A1 | 50 to 100 mcd; IF=20mA |
| Brightness Grade A2 | 100 to 200 mcd; IF=20mA |
| Voltage Grade N12-7 | 1.8 to 2.0 V; IF=20mA |
| Voltage Grade N12-8 | 2.0 to 2.2 V; IF=20mA |
| Voltage Grade N12-9 | 2.2 to 2.4 V; IF=20mA |
| Wavelength Grade HYG03 | 565 to 567.5 nm; IF=20mA |
| Wavelength Grade HYG04 | 567.5 to 570 nm; IF=20mA |
| Wavelength Grade HYG05 | 570 to 572.5 nm; IF=20mA |
| Wavelength Grade HYG06 | 572.5 to 575 nm; IF=20mA |
| Outline Dimension Tolerance | ±0.10 mm; unless otherwise specified |
| Packaging Type | In bags; packaging section |
| Packaging Protection | Moisture proof and anti-electrostatic foil bag; packaging section |
| Recommended Maximum Soldering Temperature | 240°C for 6 s; guideline for soldering |
| Recommended Wave Soldering Frequency | One wave soldering pass; guideline for soldering |
| Unopened Storage Life | 1 year; moisture-proof anti-electrostatic package with desiccant |
| Storage Before Opening | ≤30°C, ≤60% RH; before opening package; use within 1 year |
| Storage After Opening | ≤30°C, ≤40% RH; solder within 168 hours / 7 days |
| Recommended Workshop Condition | ≤30°C, ≤60% RH; recommended operating workshop condition |
| Baking Condition | 60±5°C for 24 hours; if desiccant faded, package failed, or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
At IF=20mA and Ta=25°C, the LED is specified for 50 to 200 mcd luminous intensity, 565 to 575 nm dominant wavelength, 570 nm typical peak wavelength, 1.8 to 2.4 V forward voltage, 15 nm typical half wave width, and 20° typical viewing angle. Absolute maximum ratings at Ta=25°C include 50 mW power dissipation, 20 mA continuous forward current, 80 mA peak forward current, and 5 V reverse voltage.
Assembly guidance includes wave soldering at 240°C for ≤6 s and manual welding at 300°C for 3 s, with the soldering point more than 2.0 mm from the colloid bottom. The recommended soldering guideline limits wave soldering to one pass at 240°C for 6 s.
The LED is supplied in bags with moisture-proof and anti-electrostatic foil packaging. Storage guidance specifies MSL 2 handling, one-year unopened storage life, ≤30°C and ≤60% RH before opening, and soldering within 168 hours after opening at ≤30°C and ≤40% RH.
Key Features
- Green through-hole LED with transparent colloid lens
- 2.1 x 2.3 x 2.6 x Ø1.8 mm dimensions
- 50 to 200 mcd luminous intensity at IF=20mA
- 565 to 575 nm dominant wavelength range
- 1.8 to 2.4 V forward voltage at IF=20mA
- 20° typical viewing angle at IF=20mA
- 20 mA maximum continuous forward current
- Wave soldering rated 240°C for ≤6 s
- MSL 2 moisture sensitivity level
- Moisture-proof anti-electrostatic foil bag packaging
Typical Applications
- Green panel indicators
- Through-hole PCB status lights
- Equipment signal indicators
- Narrow-angle visual indication
- Low-current board indication
- Assembly with wave soldering
- Moisture-controlled LED handling
Procurement Notes
When requesting a quote for XL-2520SYGC-T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What package size is specified for XL-2520SYGC-T?
XL-2520SYGC-T is specified with appearance dimensions of 2.1 x 2.3 x 2.6 x Ø1.8 mm. The datasheet also states an outline dimension tolerance of ±0.10 mm unless otherwise specified.
What optical output does this green LED provide?
At IF=20mA and Ta=25°C, the LED is specified for 50 to 200 mcd luminous intensity, 565 to 575 nm dominant wavelength, 570 nm typical peak wavelength, and 20° typical viewing angle.
What soldering limits apply to XL-2520SYGC-T?
Wave soldering is specified at 240°C for ≤6 seconds, with the recommended guideline also stating 240°C for 6 seconds and one wave soldering pass. Manual welding is specified at 300°C for 3 seconds.
How should the LED be stored after opening?
After opening the package, storage is specified at ≤30°C and ≤40% RH, and the LED should be soldered within 168 hours or 7 days. Baking is specified at 60±5°C for 24 hours under the listed moisture-related conditions.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.