Specifications
| Type | Description |
|---|---|
| Part Number | XL-3014VRC-02 |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 3014 SMD LED, 3.0 x 1.4 x 0.8 mm |
| Outline Dimensions | 3.0 x 1.4 x 0.8 mm; L/W/H |
| Luminous Color | Pinkish red light; red colloid |
| Moisture Sensitivity Level | MSL 3 |
| Maximum Power Dissipation | 200 mW; Ta=25°C |
| Maximum Continuous Forward Current | 60 mA; Ta=25°C |
| Peak Forward Current | 120 mA; pulse width <=0.1 ms, duty <=1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V; Ta=25°C |
| ESD Rating | 2000 V; antistatic ability |
| Operating Temperature Range | -40 to +85°C; TOPR |
| Storage Temperature Range | -40 to +85°C; TSTR |
| Lead Soldering Temperature/Time | 260°C for <=6 s; TSOL |
| Luminous Intensity | 8 min, 12 typ, 13 max lm; IF=60 mA, Ta=25°C |
| Dominant Wavelength | 615 min, 630 max nm; IF=60 mA, Ta=25°C |
| Forward Voltage | 2.8 min, 3.4 max V; IF=60 mA, Ta=25°C |
| Viewing Angle | 120 deg; 2θ1/2, IF=60 mA, Ta=25°C |
| Reverse Current | <=5 µA; VR=5 V, Ta=25°C |
| Brightness Bin H6 | 8 to 10 lm; IF=60 mA |
| Brightness Bin H7 | 10 to 13 lm; IF=60 mA |
| Voltage Bin N13-3 | 2.8 to 3.0 V; IF=60 mA |
| Voltage Bin N13-4 | 3.0 to 3.2 V; IF=60 mA |
| Voltage Bin N13-5 | 3.2 to 3.4 V; IF=60 mA |
| Wavelength Bin HR01 | 615 to 620 nm; IF=60 mA |
| Wavelength Bin HR02 | 620 to 625 nm; IF=60 mA |
| Wavelength Bin HR03 | 625 to 630 nm; IF=60 mA |
| Test Environment Temperature | 25 ±5°C; unless otherwise indicated |
| Dimension Tolerance | ±0.25 mm; unless otherwise noted |
| Tape/Reel Dimension Tolerance | ±0.1 mm; belt and disk dimensions |
| Hand Soldering Iron Power | <30 W; recommended for repair/rework only |
| Hand Soldering Temperature | <300°C; each terminal once, less than 3 s |
| Reflow Soldering Cycles | Maximum 2 times; reflow soldering |
| Recommended Maximum Soldering Temperature | 240 ±5°C for 6 s; product recommendation |
| Unopened Storage Condition | <=30°C, <60% RH, use within 1 year |
| Opened Storage Condition | <=30°C, <40% RH, solder within 168 hours |
| Baking Condition | 60 ±5°C for 24 hours if storage limit exceeded |
| Datasheet Status | request_only |
Product Overview
The XL-3014VRC-02 is a XINGLIGHT pinkish red SMD LED supplied in a 3014 surface-mount package. Its outline dimensions are 3.0 x 1.4 x 0.8 mm, with general dimension tolerance of ±0.25 mm unless otherwise noted. The luminous color is specified as pinkish red light using red colloid, and the dominant wavelength is 615 to 630 nm at IF=60 mA and Ta=25°C.
At Ta=25°C, maximum ratings include 200 mW power dissipation, 60 mA continuous forward current, 120 mA peak forward current for pulse width <=0.1 ms and duty <=1/10, and 5 V reverse voltage. Optical and electrical characteristics include 8 min, 12 typ, 13 max lm luminous intensity, 2.8 to 3.4 V forward voltage, 120 deg viewing angle, and reverse current <=5 µA at VR=5 V.
Assembly data includes MSL 3 moisture sensitivity, 260°C lead soldering for <=6 s, maximum two reflow soldering cycles, and recommended maximum soldering temperature of 240 ±5°C for 6 s. Storage and baking limits are defined for unopened, opened, and moisture-exceeded conditions.
Key Features
- 3014 SMD package measures 3.0 x 1.4 x 0.8 mm
- Pinkish red light from red colloid construction
- 615 to 630 nm dominant wavelength at 60 mA
- 8 min, 12 typ, 13 max lm luminous intensity
- 2.8 to 3.4 V forward voltage at 60 mA
- 60 mA maximum continuous forward current at 25°C
- 120 mA peak forward current under specified pulse limits
- 120 deg viewing angle at IF=60 mA
- MSL 3 moisture sensitivity classification
- -40 to +85°C operating temperature range
Typical Applications
- Pinkish red status indicators
- Compact surface-mount signal lighting
- Red display segment illumination
- Panel indicator light points
- Backlight points requiring 120 deg viewing
- Color-coded equipment indicators
- Low-profile PCB LED assemblies
Procurement Notes
When requesting a quote for XL-3014VRC-02, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What package size is specified for XL-3014VRC-02?
XL-3014VRC-02 uses a 3014 SMD LED package with outline dimensions of 3.0 x 1.4 x 0.8 mm. The datasheet lists general dimension tolerance as ±0.25 mm unless otherwise noted.
What color and wavelength range does this LED provide?
The device is specified as a pinkish red SMD LED with red colloid. At IF=60 mA and Ta=25°C, the dominant wavelength range is 615 min to 630 max nm, with wavelength bins HR01, HR02, and HR03.
What are the main current and voltage ratings?
At Ta=25°C, maximum continuous forward current is 60 mA, and peak forward current is 120 mA when pulse width is <=0.1 ms and duty is <=1/10. Forward voltage is 2.8 to 3.4 V at IF=60 mA.
What soldering limits apply to XL-3014VRC-02?
Lead soldering temperature is specified as 260°C for <=6 s. Reflow soldering is limited to a maximum of two cycles, and the product recommendation is 240 ±5°C for 6 s. Hand soldering should use <30 W and <300°C.
How should opened packages be stored before soldering?
After opening the package, the storage condition is <=30°C and <40% RH, with soldering within 168 hours. If moisture protection fails or the storage time is exceeded, the baking condition is 60 ±5°C for 24 hours.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 1, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.