Specifications
| Type | Description |
|---|---|
| Part Number | XL-4014BGWC-02 |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 4014 SMD LED, 4.0 x 1.4 x 0.8 mm |
| Outline Dimensions | 4.0 x 1.4 x 0.8 mm; L/W/H |
| Luminous Color | Ice blue; light color |
| Colloid Color | Light yellow colloid; package/encapsulant appearance |
| Moisture Sensitivity Level | MSL 3; moisture sensitivity level |
| RoHS Compliance | Complies with RoHS Directive; environmental protection process |
| Maximum Power Dissipation | 200 mW; Ta=25°C |
| Maximum Continuous Forward Current | 60 mA; Ta=25°C |
| Peak Forward Current | 120 mA; pulse width <=0.1 ms, duty <=1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V; Ta=25°C |
| ESD Rating | 2000 V; antistatic ability, Ta=25°C |
| Operating Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum rating table |
| Storage Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum rating table |
| Lead Soldering Temperature/Time | 260°C, <=6 s; absolute maximum rating |
| Luminous Flux | 6 lm min, 12 lm typ, 17 lm max; IF=60 mA, Ta=25°C |
| Chromaticity Coordinate X | 0.1736 min, 0.1832 max; IF=60 mA, Ta=25°C |
| Chromaticity Coordinate Y | 0.1374 min, 0.1712 max; IF=60 mA, Ta=25°C |
| Forward Voltage | 2.8 V min, 3.4 V max; IF=60 mA, Ta=25°C |
| Color Rendering Index | Ra 70 typ; IF=60 mA, Ta=25°C |
| Viewing Angle | 120 deg typ; 2θ1/2, IF=60 mA, Ta=25°C |
| Reverse Current | 5 µA max; VR=5 V, Ta=25°C |
| Color Temperature | Not specified; IF=60 mA, Ta=25°C |
| Brightness Bin H5 | 6 to 8 lm; IF=60 mA |
| Brightness Bin H6 | 8 to 10 lm; IF=60 mA |
| Brightness Bin H7 | 10 to 13 lm; IF=60 mA |
| Brightness Bin H8 | 13 to 17 lm; IF=60 mA |
| Voltage Bin N13-3 | 2.8 to 3.0 V; IF=60 mA |
| Voltage Bin N13-4 | 3.0 to 3.2 V; IF=60 mA |
| Voltage Bin N13-5 | 3.2 to 3.4 V; IF=60 mA |
| Chromaticity Bin 1 Point 1 | x=0.1771, y=0.1590; color coordinate bin 1# |
| Chromaticity Bin 1 Point 2 | x=0.1736, y=0.1469; color coordinate bin 1# |
| Chromaticity Bin 1 Point 3 | x=0.1763, y=0.1374; color coordinate bin 1# |
| Chromaticity Bin 1 Point 4 | x=0.1797, y=0.1496; color coordinate bin 1# |
| Chromaticity Bin 2 Point 1 | x=0.1805, y=0.1712; color coordinate bin 2# |
| Chromaticity Bin 2 Point 2 | x=0.1771, y=0.1590; color coordinate bin 2# |
| Chromaticity Bin 2 Point 3 | x=0.1797, y=0.1496; color coordinate bin 2# |
| Chromaticity Bin 2 Point 4 | x=0.1832, y=0.1617; color coordinate bin 2# |
| Test Ambient Temperature | 25±5°C; unless otherwise indicated |
| Working Life Test | 1000 hours; continuous lighting at maximum rated current at room temperature; table also states tested at 60 mA but text mentions 20 mA |
| High Temperature High Humidity Storage Test | 240 hours ±2 hours; Ta=85±5°C, RH=90-95%, IR reflow in-board 2 times |
| High Temperature Storage Test | 1000 hours; Ta=85±5°C |
| Low Temperature Storage Test | 1000 hours; Ta=-40±5°C |
| Cold/Hot Cycle Test | 100 cycles; 105°C 30 min, 25°C 5 min, -55°C 30 min, 25°C 5 min |
| Hot/Cold Impact Test | 100 cycles; IR reflow in-board 2 times; 100±5°C for 20 min and -40±5°C for 20 min |
| Anti-Tin Test | 260±5°C, 10±1 s, 2 times; soldering temperature T.sol |
| Lead Process Reflow Peak Temperature | 235°C +5/-0°C; lead infrared reflow process |
| Lead Process Time At Peak | 10 to 15 s; at 235°C +5/-0°C |
| Lead-Free Process Reflow Peak Temperature | 255°C +0/-5°C; lead-free infrared reflow process |
| Lead-Free Process Time At Peak | 5 to 10 s; at 255°C +0/-5°C |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s; product recommended maximum welding temperature |
| Manual Soldering Iron Power | <30 W; hand soldering for repair/rework |
| Manual Soldering Temperature | <300°C; each terminal one time only |
| Manual Soldering Time | <3 s per terminal; each terminal one time only |
| Maximum Reflow Cycles | 2 times; reflow soldering |
| Cleaning With Alcohol | <=30°C for 3 min or <=50°C for 30 s; after soldering |
| Ultrasonic Cleaning Power | <=300 W; pretest required before ultrasonic cleaning |
| Unopened Storage Condition | <=30°C, <=60% RH, use within 1 year; before opening moisture-proof package |
| Opened Storage Condition | <=30°C, <=40% RH, solder within 168 hours / 7 days; after opening package |
| Recommended Workshop Condition | <=30°C, <=60% RH; operation after opening package |
| Baking Condition | 60±5°C for 24 hours; if moisture absorbent fails or storage time exceeded |
| Outline Dimension Tolerance | ±0.25 mm; unless otherwise noted |
| Tape/Reel Dimension Tolerance | ±0.1 mm; belt and disk dimensions |
| Datasheet Status | request_only |
Product Overview
The XL-4014BGWC-02 is a XINGLIGHT ice blue SMD LED built in a 4014 surface-mount package. Its outline dimensions are 4.0 x 1.4 x 0.8 mm with a light yellow colloid appearance, and the datasheet lists the product under an environmental protection process that complies with the RoHS Directive.
At IF=60 mA and Ta=25°C, the LED is specified for 6 lm minimum, 12 lm typical, and 17 lm maximum luminous flux. Forward voltage is specified from 2.8 to 3.4 V, reverse current is 5 µA maximum at VR=5 V, and the typical viewing angle is 120 degrees. Chromaticity coordinates are defined by x and y limits, with separate color coordinate bins.
Assembly guidance includes MSL 3 handling, maximum two reflow cycles, lead-free reflow peak temperature of 255°C +0/-5°C, and opened-package storage of <=30°C and <=40% RH with soldering within 168 hours.
Key Features
- Ice blue luminous color in 4014 SMD format
- 4.0 x 1.4 x 0.8 mm outline dimensions
- Light yellow colloid package appearance
- 60 mA maximum continuous forward current
- 120 mA peak forward current under pulsed conditions
- 2.8 to 3.4 V forward voltage at 60 mA
- 6 to 17 lm luminous flux at 60 mA
- 120 degree typical viewing angle
- MSL 3 moisture sensitivity level
- RoHS Directive compliance stated in datasheet
Typical Applications
- Compact surface-mount indicator lighting
- Ice blue color accent lighting
- PCB-mounted visual status indicators
- Low-profile lighting assemblies
- Wide-angle LED display elements
- Reflow-soldered LED board designs
Procurement Notes
When requesting a quote for XL-4014BGWC-02, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What package is used for XL-4014BGWC-02?
XL-4014BGWC-02 uses a 4014 SMD LED package with outline dimensions of 4.0 x 1.4 x 0.8 mm. The datasheet also lists an outline dimension tolerance of ±0.25 mm unless otherwise noted.
What are the main optical ratings at 60 mA?
At IF=60 mA and Ta=25°C, luminous flux is specified as 6 lm minimum, 12 lm typical, and 17 lm maximum. The viewing angle is 120 degrees typical, and color rendering index is Ra 70 typical.
What forward voltage range is specified for this LED?
The datasheet specifies forward voltage from 2.8 V minimum to 3.4 V maximum at IF=60 mA and Ta=25°C. Voltage bins N13-3, N13-4, and N13-5 divide this range into 2.8-3.0 V, 3.0-3.2 V, and 3.2-3.4 V.
What soldering limits apply to XL-4014BGWC-02?
The absolute maximum lead soldering rating is 260°C for <=6 s. The recommended maximum welding temperature is 240±5°C for 6 s, with a maximum of two reflow cycles. Manual soldering is limited to <300°C and <3 s per terminal.
How should opened moisture-proof packages be stored?
After opening, the datasheet specifies storage at <=30°C and <=40% RH, with soldering within 168 hours or 7 days. Recommended workshop conditions are <=30°C and <=60% RH.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.