XL-A324SURSYGC Bi-color Common Cathode LED

Specifications

Product Overview

The XL-A324SURSYGC is a XINGLIGHT bi-color common cathode LED using high brightness red and yellow-green emitters in a transparent/water-clear colloid. The F3 through-hole package is specified as 3.8 x 3.0 x 5.2 x 28 mm, with a general dimension tolerance of ±0.50 mm unless otherwise specified.

At IF=20 mA and Ta=25°C, the red channel provides 400 to 700 mcd with a dominant wavelength of 630 to 640 nm and 1.8 to 2.4 V forward voltage. The yellow-green channel provides 50 to 200 mcd with a dominant wavelength of 565 to 575 nm and 2.0 to 2.6 V forward voltage. Both colors have a typical 30 deg viewing angle and ≤10 µA reverse current at VR=5 V.

Absolute maximum ratings list 50 mW power dissipation, 20 mA continuous forward current, and 80 mA peak forward current for each color at Ta=25°C. Assembly limits include 240°C maximum wave soldering for ≤6 s and 300°C manual soldering for 3 s, with the soldering point at least 2.0 mm from the colloid bottom.

Key Features

• Common cathode red and yellow-green LED configuration
• F3 through-hole package with 3.8 x 3.0 mm body
• Transparent water-clear colloid for both luminous colors
• Red luminous intensity from 400 to 700 mcd
• Yellow-green luminous intensity from 50 to 200 mcd
• 20 mA maximum continuous forward current per color
• 80 mA peak forward current per color
• Typical 30 deg viewing angle at IF=20 mA
• MSL 2 moisture sensitivity level stated by manufacturer
• Bag packaging in moisture-proof anti-electrostatic foil

Typical Applications

• Bi-color status indicators
• Panel indicator lamps
• Through-hole LED displays
• Red and green signal outputs
• Equipment state indication
• Polarity-controlled color indication

Procurement Notes

When requesting a quote for XL-A324SURSYGC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.