Specifications
| Type | Description |
|---|---|
| Part Number | XL606A-G |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package Case | DIP4 for XL606A; SMD4 for XL606AA; package outline dimensions referenced in mm but numeric dimensions not readable in provided text |
| Inferred Category | LED |
| Component Type | Other |
| Relay Contact Form | Normally open, single pole single throw; condition: Feature description |
| Control Voltage | 60 VAC or DC; condition: Feature description |
| Isolation Voltage | 5000 Vrms; condition: Between input and output |
| Operating Temperature | -40 to +85 °C; condition: Feature description |
| Molding Compound Flammability | UL 94V-0; condition: Mechanical data |
| Terminal Finish | Matte tin-plated leads; condition: Solderability per MIL-STD-202, Method 208 |
| Package Option | DIP4; condition: XL606A ordering information |
| Package Option | SMD4; condition: XL606AA ordering information |
| Shipping Quantity | 100 pcs/tube; condition: XL606A DIP4 |
| Shipping Quantity | 2000 pcs/tape & reel; condition: XL606AA SMD4 |
| Marking Code | XL606A; condition: XL606A and XL606AA |
| Forward Current | 50 mA; condition: Maximum rating, Ta=25°C unless otherwise specified |
| Peak Forward Current | 1 A; condition: Pulse width <=1 us, duty ratio 0.001 |
| Reverse Voltage | 6 V; condition: Maximum rating, Ta=25°C unless otherwise specified |
| Input Power Dissipation | 75 mW; condition: Maximum rating, Ta=25°C unless otherwise specified |
| Load Voltage | 60 V; condition: Peak AC, maximum rating, Ta=25°C unless otherwise specified |
| Continuous Load Current | 0.5 A; condition: Peak AC, maximum rating, Ta=25°C unless otherwise specified |
| Peak Load Current | 1.5 A; condition: 100 ms, 1 shot, VL=DC |
| Output Power Dissipation | 500 mW; condition: Maximum rating, Ta=25°C unless otherwise specified |
| Isolation Voltage | 5000 Vrms; condition: 40 to 60% RH, AC for 1 minute |
| Operating Temperature | -40 to +85 °C; condition: Thermal characteristics |
| Storage Temperature Range | -40 to +100 °C; condition: Thermal characteristics |
| LED Turn-On Current | min 0 mA, typ 0.7 mA, max 3 mA; condition: IL=0.5 A, Ta=25°C unless otherwise specified |
| LED Turn-Off Current | min 0 mA, typ 0.5 mA, max 3 mA; condition: IL=0.5 A, Ta=25°C unless otherwise specified |
| LED Dropout Voltage | min 1 V, typ 1.3 V, max 1.4 V; condition: IF=5 mA, Ta=25°C unless otherwise specified |
| On Resistance | typ 0.8 ohm, max 1.5 ohm; condition: IF=5 mA, IL=0.5 A, within 1 s on time, Ta=25°C unless otherwise specified |
| Off-State Leakage Current | typ 100 nA, max 1000 nA; condition: IF=0 mA, VL=60 V, Ta=25°C unless otherwise specified |
| Turn-On Time | min 200 us, typ 400 us, max 2000 us; condition: IF=5 mA, IL=0.5 A, Ta=25°C unless otherwise specified |
| Turn-Off Time | min 50 us, typ 250 us, max 1000 us; condition: IF=5 mA, IL=0.5 A, Ta=25°C unless otherwise specified |
| I/O Capacitance | typ 0.8 pF, max 1.5 pF; condition: f=1 MHz, V=0, Ta=25°C unless otherwise specified |
| Initial I/O Isolation Resistance | min 5*10^10 Mohm; condition: VI-O=500 V, 40 to 60% RH, Ta=25°C unless otherwise specified |
| Recommended LED Forward Current | 5 to 10 mA; condition: Application note |
| Reflow Preheat Temperature | min 150 °C, max 200 °C; condition: Reflow soldering profile |
| Reflow Preheat Time | min 60 s, max 120 s; condition: Reflow soldering profile |
| Reflow Ramp-Up Rate | 3 °C/s; condition: TL to TP |
| Reflow Liquidus Temperature | 217 °C; condition: Reflow soldering profile |
| Reflow Time Above Liquidus | min 60 s, max 150 s; condition: Time above TL |
| Reflow Peak Temperature | 260 °C; condition: Reflow soldering profile |
| Reflow Peak Time | 30 s; condition: Time during which Tc is between TP-5 and TP |
| Reflow Ramp-Down Rate | 6 °C/s; condition: TP to TL |
| Maximum Reflow Cycles | No more than 3 times; condition: Recommended reflow soldering conditions |
| Wave Soldering Average Ramp-Up Rate | ~200 °C/s; condition: Wave soldering profile |
| Wave Soldering Heating Rate During Preheat | typ 1 to 2 °C/s, max 4 °C/s; condition: Wave soldering profile |
| Wave Soldering Final Preheat Temperature | ~130 °C; condition: Ts |
| Wave Soldering Preheat Time | >60 s; condition: 25°C to Ts |
| Wave Soldering Peak Temperature | 260 °C; condition: Tp |
| Wave Soldering Peak Time | 10 s; condition: Time within peak temperature tp |
| Wave Soldering Ramp-Down Rate | 5 °C/s maximum; condition: Wave soldering profile |
| Hand Soldering Iron Temperature | 360 °C +5 °C; condition: Within 3 s; only for product rework or sample testing |
| DIP4 Packing Form | Tube, 500 mm; condition: Packing table |
| DIP4 Quantity Per Tube | 100 pcs/tube; condition: Packing table |
| DIP4 Quantity Per Box | 5000 pcs/box; condition: 50 tubes/box |
| DIP4 Quantity Per Carton | 50000 pcs/carton; condition: 10 boxes/carton |
| SMD4 Packing Form | Reel, diameter 330 mm; condition: Packing table |
| SMD4 Quantity Per Reel | 2000 pcs/reel; condition: Packing table |
| SMD4 Quantity Per Box | 4000 pcs/box; condition: 2 reels/box |
| SMD4 Quantity Per Carton | 20000 pcs/carton; condition: 10 boxes/carton |
| Document Validity | Valid until Dec 31, 2026; condition: Manufacturer attention note |
| Datasheet Status | request_only |
Product Overview
The XL606A-G is documented by XINGLIGHT as a normally open photo relay in the LED category. Its relay contact form is normally open, single pole single throw, and the control rating is specified as 60 VAC or DC. The input-output isolation rating is 5000 Vrms, with isolation also specified at 40 to 60% RH using AC for 1 minute.
Package information lists DIP4 for XL606A and SMD4 for XL606AA. The package outline dimensions are referenced in millimeters, but the numeric dimensions were not readable in the provided text. Ordering and packing data identify 100 pcs/tube for DIP4 and 2000 pcs/tape and reel or per reel for SMD4, with larger box and carton quantities also specified.
Electrical limits include 50 mA forward current, 6 V reverse voltage, 75 mW input power dissipation, 60 V peak AC load voltage, 0.5 A continuous load current, and 500 mW output power dissipation. Application design should account for the recommended 5 to 10 mA LED forward current, 0.8 ohm typical on resistance, leakage current, switching times, and the -40 to +85 °C operating range.
Key Features
- Normally open, single pole single throw relay contact
- 60 VAC or DC control voltage rating
- 5000 Vrms isolation between input and output
- -40 to +85 °C operating temperature range
- 60 V peak AC load voltage rating
- 0.5 A continuous load current rating
- 1.5 A peak load current for 100 ms
- Typical 0.8 ohm on resistance at IF=5 mA
- Recommended LED forward current is 5 to 10 mA
- DIP4 tube and SMD4 reel package options
Typical Applications
- 60 V load switching
- Isolated AC or DC control
- Normally open SPST relay circuits
- LED-driven relay interface designs
- DIP4 tube assembly builds
- SMD4 tape-and-reel assembly
- Rework or sample hand soldering
Procurement Notes
When requesting a quote for XL606A-G, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What contact form does the XL606A-G use?
The XL606A-G is described as a normally open, single pole single throw photo relay. This contact form is listed in the feature description of the manufacturer technical datasheet.
What load voltage and current are specified?
The datasheet lists a 60 V peak AC load voltage, 0.5 A continuous load current, and 1.5 A peak load current for a 100 ms, one-shot condition with VL=DC.
What isolation rating is provided for input to output?
Input-output isolation is specified as 5000 Vrms. The electrical table also states 5000 Vrms at 40 to 60% RH with AC applied for 1 minute.
Which package options are documented for this device family?
The extracted ordering information lists DIP4 for XL606A and SMD4 for XL606AA. Package outline dimensions are referenced in millimeters, but numeric dimensions were not readable in the provided text.
What LED drive current is recommended?
The application note specifies a recommended LED forward current range of 5 to 10 mA. Related characteristics include 0.7 mA typical LED turn-on current and 0.5 mA typical LED turn-off current at IL=0.5 A.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 2, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.