Specifications
| Type | Description |
|---|---|
| Part Number | 12-22_BHR6C-A01_2C |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions shown in datasheet, unit mm, tolerances unless mentioned ±0.1 mm |
| Emitted Color, Code BH | Blue |
| Chip Material, Code BH Blue Emitter | InGaN |
| Emitted Color, Code R6 | Brilliant Red |
| Chip Material, Code R6 Brilliant Red Emitter | AlGaInP |
| Resin Color, Codes BH and R6 | Water Clear |
| Reverse Voltage, Ta=25°C | 5 V |
| Forward Current, Code BH, Ta=25°C | 10 mA absolute maximum rating |
| Forward Current, Code R6, Ta=25°C | 25 mA absolute maximum rating |
| Peak Forward Current, Code BH, Ta=25°C | 40 mA, duty 1/10 at 1 kHz |
| Peak Forward Current, Code R6, Ta=25°C | 50 mA, duty 1/10 at 1 kHz |
| Power Dissipation, Code BH, Ta=25°C | 40 mW absolute maximum rating |
| Power Dissipation, Code R6, Ta=25°C | 60 mW absolute maximum rating |
| Electrostatic Discharge, Code BH, Ta=25°C | 150 V HBM |
| Electrostatic Discharge, Code R6, Ta=25°C | 2000 V HBM |
| Operating Temperature | -40 to +85 °C absolute maximum rating |
| Storage Temperature | -40 to +90 °C absolute maximum rating |
| Soldering Temperature, Reflow | 260 °C for 10 s |
| Soldering Temperature, Hand Soldering | 350 °C for 3 s |
| Luminous Intensity, Code BH, Ta=25°C, IF=5 mA | min 18.0 mcd, typ 26.0 mcd |
| Luminous Intensity, Code R6, Ta=25°C, IF=5 mA | min 22.5 mcd, typ 30.0 mcd |
| Viewing Angle, Ta=25°C | typ 120 deg, 2θ1/2 |
| Peak Wavelength, Code BH, Ta=25°C, IF=5 mA | typ 468 nm |
| Peak Wavelength, Code R6, Ta=25°C, IF=5 mA | typ 632 nm |
| Dominant Wavelength, Code BH, Ta=25°C, IF=5 mA | typ 470 nm |
| Dominant Wavelength, Code R6, Ta=25°C, IF=5 mA | typ 624 nm |
| Spectrum Radiation Bandwidth, Code BH, Ta=25°C, IF=5 mA | typ 25 nm |
| Spectrum Radiation Bandwidth, Code R6, Ta=25°C, IF=5 mA | typ 20 nm |
| Forward Voltage, Code BH, Ta=25°C, IF=5 mA | min 2.7 V, max 3.1 V |
| Forward Voltage, Code R6, Ta=25°C, IF=5 mA | min 1.7 V, max 2.2 V |
| Reverse Current, Code BH, Ta=25°C, VR=5 V | max 50 µA |
| Reverse Current, Code R6, Ta=25°C, VR=5 V | max 10 µA |
| Luminous Intensity Tolerance | ±11% |
| Forward Voltage Tolerance | ±0.05 V |
| Tape and Reel Package | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 2000 pcs per reel |
| Storage Before Opening | ≤30°C and ≤90% RH, moisture-proof bag unopened |
| Floor Life After Opening | 1 year at ≤30°C and ≤60% RH |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or LEDs exceeded storage time |
| Reflow Limit | not more than two times |
| Soldering Iron Capacity | less than 25 W; tip temperature less than 350°C for 3 seconds within once per terminal |
| Datasheet Status | request_only |
Product Overview
12-22_BHR6C-A01_2C is an EVERLIGHT dual-color SMD LED built with two emitter codes: BH for blue and R6 for brilliant red. The BH blue emitter uses InGaN chip material, while the R6 brilliant red emitter uses AlGaInP. Both emitters are supplied with water clear resin.
Electrical and optical characteristics are specified at Ta=25°C and IF=5 mA. The blue channel provides 18.0 mcd minimum and 26.0 mcd typical luminous intensity, with 468 nm typical peak wavelength and 470 nm typical dominant wavelength. The brilliant red channel provides 22.5 mcd minimum and 30.0 mcd typical luminous intensity, with 632 nm typical peak wavelength and 624 nm typical dominant wavelength.
The package is identified as SMD B, with dimensions shown in millimeters and general tolerance of ±0.1 mm unless otherwise stated. Assembly data includes 8 mm tape on a 7 inch reel, 2000 pieces per reel, reflow soldering up to 260°C for 10 seconds, and a reflow limit of not more than two times.
Key Features
- Dual-color SMD LED with blue and brilliant red emitters
- Blue BH emitter uses InGaN chip material
- R6 brilliant red emitter uses AlGaInP chip material
- Water clear resin for both emitter codes
- Typical 120 degree viewing angle at Ta=25°C
- Blue channel typical dominant wavelength is 470 nm
- Red channel typical dominant wavelength is 624 nm
- Reverse voltage rating is 5 V at Ta=25°C
- 8 mm tape supplied on 7 inch reel
- Loaded quantity is 2000 pieces per reel
Typical Applications
- Dual-color status indicators
- Blue and red panel indicators
- Compact SMD visual signaling
- Board-level color indication
- Low-current equipment indicators
- Reflow-assembled LED displays
Procurement Notes
When requesting a quote for 12-22_BHR6C-A01_2C, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What colors does 12-22_BHR6C-A01_2C emit?
The part contains two emitter codes. Code BH emits blue light and uses InGaN chip material. Code R6 emits brilliant red light and uses AlGaInP chip material. Both emitters use water clear resin.
What are the optical ratings at 5 mA?
At Ta=25°C and IF=5 mA, the blue channel is rated 18.0 mcd minimum and 26.0 mcd typical. The brilliant red channel is rated 22.5 mcd minimum and 30.0 mcd typical.
What soldering limits apply to this LED?
The datasheet specifies reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. Reflow soldering should be performed not more than two times.
How is 12-22_BHR6C-A01_2C packaged for assembly?
The packing feature is 8 mm tape on a 7 inch diameter reel. The carrier tape loaded quantity is 2000 pieces per reel, supporting SMD assembly handling.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.