Specifications
| Type | Description |
|---|---|
| Part Number | 12-22SDRUGC_S530-A2_TR8 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 12-22 SMD; package dimensions shown in drawing, unit mm, tolerances unless mentioned ±0.1 mm |
| Emitted Color | Blue |
| Chip Material | InGaN |
| Emitted Color | Brilliant Red |
| Chip Material | AlGaInP |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 10 mA |
| Forward Current | 25 mA |
| Peak Forward Current | 40 mA |
| Peak Forward Current | 50 mA |
| Power Dissipation | 40 mW |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 150 V |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | Min 18.0 mcd, Typ 26.0 mcd |
| Luminous Intensity | Min 22.5 mcd, Typ 30.0 mcd |
| Viewing Angle | Typ 120 deg |
| Peak Wavelength | Typ 468 nm |
| Peak Wavelength | Typ 632 nm |
| Dominant Wavelength | Typ 470 nm |
| Dominant Wavelength | Typ 624 nm |
| Spectrum Radiation Bandwidth | Typ 25 nm |
| Spectrum Radiation Bandwidth | Typ 20 nm |
| Forward Voltage | Min 2.7 V, Max 3.1 V |
| Forward Voltage | Min 1.7 V, Max 2.2 V |
| Reverse Current | Max 50 µA |
| Reverse Current | Max 10 µA |
| Luminous Intensity Tolerance | ±11% |
| Forward Voltage Tolerance | ±0.05 V |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 2000 pcs per reel |
| Reflow Cycles | Not more than two times |
| Floor Life After Opening | 1 year |
| Storage Before Opening | 30°C or less and 90% RH or less |
| Baking Treatment | 60±5°C for 24 hours |
| Datasheet Status | request_only |
Product Overview
The 12-22SDRUGC_S530-A2_TR8 is an EVERLIGHT SMD multi-color LED in the 12-22 SMD package. The package drawing uses millimeter dimensions, with tolerances of ±0.1 mm unless otherwise specified. The device uses water-clear resin and includes two emitter codes: BH for blue and R6 for brilliant red.
The BH blue emitter uses InGaN material, with 468 nm typical peak wavelength and 470 nm typical dominant wavelength at IF=5 mA. The R6 brilliant red emitter uses AlGaInP material, with 632 nm typical peak wavelength and 624 nm typical dominant wavelength at IF=5 mA. Both emitters have a typical 120 deg viewing angle.
Absolute maximum ratings at Ta=25°C include 5 V reverse voltage, -40 to +85°C operating temperature, and -40 to +90°C storage temperature. Assembly data includes 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, not more than two reflow cycles, and 8 mm tape on a 7 inch reel with 2000 pieces per reel.
Key Features
- SMD multi-color LED with blue and brilliant red emitters
- Water-clear resin for both BH and R6 emitter codes
- Blue InGaN chip with 470 nm typical dominant wavelength
- Brilliant red AlGaInP chip with 624 nm typical dominant wavelength
- Typical 120 deg viewing angle at Ta=25°C
- Blue forward voltage range is 2.7 V to 3.1 V
- Red forward voltage range is 1.7 V to 2.2 V
- 8 mm tape on 7 inch reel packaging
- Loaded quantity is 2000 pcs per reel
- Reflow soldering rated 260°C for 10 seconds
Typical Applications
- Board-level status indicators
- Compact two-color signal lamps
- Control panel indicators
- Consumer electronics indication
- Industrial equipment status lighting
- Color-coded user interfaces
- Automated SMT assembly
Procurement Notes
When requesting a quote for 12-22SDRUGC_S530-A2_TR8, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What colors does 12-22SDRUGC_S530-A2_TR8 emit?
The part includes two emitter codes: BH for blue and R6 for brilliant red. The blue emitter uses InGaN material, while the brilliant red emitter uses AlGaInP material. Both use water-clear resin.
What package is used for this EVERLIGHT LED?
12-22SDRUGC_S530-A2_TR8 is specified as a 12-22 SMD package. The package drawing uses millimeter dimensions, and tolerances are ±0.1 mm unless another tolerance is mentioned.
What are the typical wavelength values?
For code BH, the typical peak wavelength is 468 nm and the typical dominant wavelength is 470 nm. For code R6, the typical peak wavelength is 632 nm and the typical dominant wavelength is 624 nm.
What soldering limits are listed in the datasheet?
The soldering ratings list reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. The soldering precautions state that reflow should be performed not more than two times.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.