Specifications
| Type | Description |
|---|---|
| Part Number | 12-23C_R6GHBHC-A01_2C |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | LED |
| Package / Case | SMD-B, package dimensions shown in datasheet; numeric dimensions not available in provided text |
| Emitted Color | Brilliant Red; Code R6; page 2 |
| Chip Material | AlGaInP; Code R6, Brilliant Red; page 2 |
| Emitted Color | Brilliant Green; Code GH; page 2 |
| Chip Material | InGaN; Code GH, Brilliant Green; page 2 |
| Emitted Color | Blue; Code BH; page 2 |
| Chip Material | InGaN; Code BH, Blue; page 2 |
| Resin Color | Water Clear; all color codes; page 2 |
| Reverse Voltage | 5 V; Ta=25°C; page 2 |
| Forward Current | 25 mA; Code R6, Ta=25°C; page 2 |
| Forward Current | 25 mA; Code GH, Ta=25°C; page 2 |
| Forward Current | 20 mA; Code BH, Ta=25°C; page 2 |
| Peak Forward Current | 60 mA; Code R6, duty 1/10 at 1 kHz, Ta=25°C; page 2 |
| Peak Forward Current | 100 mA; Code GH, duty 1/10 at 1 kHz, Ta=25°C; page 2 |
| Peak Forward Current | 100 mA; Code BH, duty 1/10 at 1 kHz, Ta=25°C; page 2 |
| Power Dissipation | 60 mW; Code R6, Ta=25°C; page 2 |
| Power Dissipation | 95 mW; Code GH, Ta=25°C; page 2 |
| Power Dissipation | 75 mW; Code BH, Ta=25°C; page 2 |
| Electrostatic Discharge HBM | 2000 V; Code R6, Ta=25°C; page 2 |
| Electrostatic Discharge HBM | 150 V; Code GH, Ta=25°C; page 2 |
| Electrostatic Discharge HBM | 150 V; Code BH, Ta=25°C; page 2 |
| Operating Temperature | -40 to +85 °C; absolute maximum ratings table; page 2 |
| Storage Temperature | -40 to +90 °C; absolute maximum ratings table; page 2 |
| Reflow Soldering Temperature | 260 °C for 10 sec; page 2 |
| Hand Soldering Temperature | 350 °C for 3 sec; page 2 |
| Luminous Intensity | 63 mcd min, 90 mcd typ; Code R6, IF=20 mA, Ta=25°C; page 3 |
| Luminous Intensity | 125 mcd min, 180 mcd typ; Code GH, IF=20 mA, Ta=25°C; page 3 |
| Luminous Intensity | 32 mcd min, 50 mcd typ; Code BH, IF=20 mA, Ta=25°C; page 3 |
| Viewing Angle | 100 degrees typ; 2θ1/2, Ta=25°C; page 3 |
| Peak Wavelength | 632 nm typ; Code R6, IF=20 mA, Ta=25°C; page 3 |
| Peak Wavelength | 518 nm typ; Code GH, IF=20 mA, Ta=25°C; page 3 |
| Peak Wavelength | 468 nm typ; Code BH, IF=20 mA, Ta=25°C; page 3 |
| Dominant Wavelength | 624 nm typ; Code R6, IF=20 mA, Ta=25°C; page 3 |
| Dominant Wavelength | 525 nm typ; Code GH, IF=20 mA, Ta=25°C; page 3 |
| Dominant Wavelength | 470 nm typ; Code BH, IF=20 mA, Ta=25°C; page 3 |
| Spectrum Radiation Bandwidth | 20 nm typ; Code R6, IF=20 mA, Ta=25°C; page 3 |
| Spectrum Radiation Bandwidth | 35 nm typ; Code GH, IF=20 mA, Ta=25°C; page 3 |
| Spectrum Radiation Bandwidth | 25 nm typ; Code BH, IF=20 mA, Ta=25°C; page 3 |
| Forward Voltage | 2.0 V typ, 2.4 V max; Code R6, IF=20 mA, Ta=25°C; page 3 |
| Forward Voltage | 3.3 V typ, 3.9 V max; Code GH, IF=20 mA, Ta=25°C; page 3 |
| Forward Voltage | 3.3 V typ, 3.9 V max; Code BH, IF=20 mA, Ta=25°C; page 3 |
| Reverse Current | 10 µA max; Code R6, VR=5 V, Ta=25°C; page 3 |
| Reverse Current | 50 µA max; Code GH, VR=5 V, Ta=25°C; page 3 |
| Reverse Current | 50 µA max; Code BH, VR=5 V, Ta=25°C; page 3 |
| Luminous Intensity Tolerance | ±11%; electro-optical characteristics note; page 3 |
| Forward Voltage Tolerance | ±0.1 V; electro-optical characteristics note; page 3 |
| Packing | 8 mm tape on 7 inch diameter reel; page 1 |
| Loaded Quantity | 2000 pcs per reel; carrier tape dimensions; page 9 |
| Pb-Free | Yes; product features; page 1 |
| RoHS Compliance | RoHS compliant version; product features; page 1 |
| REACH Compliance | Complies with EU REACH; product features; page 1 |
| Halogen-Free Limits | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm; page 1 |
| Floor Life After Opening | 1 year; 30°C or less and 60% RH or less; page 10 |
| Storage Before Opening | 30°C or less and 90% RH or less; moisture proof bag unopened; page 10 |
| Baking Treatment | 60±5°C for 24 hours; if silica gel faded or LEDs exceeded storage time; page 10 |
| Reflow Count | Not more than two times; reflow soldering; page 10 |
| Datasheet Status | request_only |
Product Overview
12-23C_R6GHBHC-A01_2C is an EVERLIGHT multi-color SMD LED configured with Brilliant Red, Brilliant Green, and Blue emitters. The red channel uses AlGaInP chip material, while the green and blue channels use InGaN chip material. The resin color is water clear across all color codes.
The package is identified as SMD-B, with package dimensions shown in the datasheet text but without numeric dimensions in the provided extraction. Electro-optical values at IF=20 mA and Ta=25°C include typical luminous intensity of 90 mcd for R6, 180 mcd for GH, and 50 mcd for BH. Typical dominant wavelengths are 624 nm, 525 nm, and 470 nm, and the viewing angle is 100 degrees typical.
Assembly and handling facts include a 260°C for 10 seconds reflow soldering rating, 350°C for 3 seconds hand soldering rating, and not more than two reflow cycles. The part is supplied in 8 mm tape on 7 inch diameter reel with 2000 pieces per reel, and is listed as Pb-free, RoHS compliant, EU REACH compliant, and within the stated halogen-free limits.
Key Features
- Multi-color SMD LED with Brilliant Red, Green, and Blue
- Water-clear resin across all color code channels
- R6 channel uses AlGaInP chip material
- GH and BH channels use InGaN chip material
- Typical 100 degree viewing angle at Ta=25°C
- Typical dominant wavelengths: 624 nm, 525 nm, 470 nm
- Forward voltage rated at IF=20 mA per channel
- Pb-free, RoHS compliant, and EU REACH compliant
- Supplied as 8 mm tape on 7 inch reel
- Loaded quantity is 2000 pieces per reel
Typical Applications
- RGB status indicators
- Multicolor panel indicators
- Compact SMD indicator assemblies
- Color-coded equipment displays
- PCB-mounted visual signaling
- Reflow-assembled LED boards
Procurement Notes
When requesting a quote for 12-23C_R6GHBHC-A01_2C, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What emitted colors are included in 12-23C_R6GHBHC-A01_2C?
The device includes Brilliant Red under code R6, Brilliant Green under code GH, and Blue under code BH. The red channel uses AlGaInP chip material, while the green and blue channels use InGaN chip material.
What are the typical dominant wavelengths for each channel?
At IF=20 mA and Ta=25°C, the typical dominant wavelengths are 624 nm for the R6 Brilliant Red channel, 525 nm for the GH Brilliant Green channel, and 470 nm for the BH Blue channel.
What soldering limits apply to this SMD LED?
The extracted datasheet facts list a reflow soldering temperature of 260°C for 10 seconds and a hand soldering temperature of 350°C for 3 seconds. Reflow soldering is specified as not more than two times.
How is 12-23C_R6GHBHC-A01_2C packed for assembly?
The part is packed in 8 mm tape on a 7 inch diameter reel. The carrier tape quantity is listed as 2000 pieces per reel, based on the extracted packing and carrier tape information.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.