Specifications
| Type | Description |
|---|---|
| Part Number | 15-11_BHC-AN1P2_2T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 15-11 SMD-B package; dimensions not text-extractable; supplied in 8 mm tape on 7 inch reel |
| Datasheet Part Number | 15-11/T1D-AQRHY/2T |
| Chip Material | InGaN |
| Emitted Color | Pure White |
| Resin Color | Yellow Diffused |
| Reverse Voltage | 5 V |
| Forward Current | 10 mA |
| Peak Forward Current | 40 mA; duty 1/10 @ 1 kHz, Ta=25°C |
| Power Dissipation | 40 mW |
| Electrostatic Discharge | 2000 V HBM |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 72.0 min, 180.0 max mcd; IF=5 mA, Ta=25°C |
| Viewing Angle | 140 deg typ; 2θ1/2, IF=5 mA, Ta=25°C |
| Forward Voltage | 2.70 min, 3.15 max V; IF=5 mA, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Forward Voltage Tolerance | ±0.1 V |
| Reverse Operation Note | Device is not designed for reverse operation |
| Luminous Intensity Bin Q | 72.0 to 112.0 mcd; IF=5 mA |
| Luminous Intensity Bin R | 112.0 to 180.0 mcd; IF=5 mA |
| Forward Voltage Bin 15 | 2.70 to 2.85 V; IF=5 mA |
| Forward Voltage Bin 16 | 2.85 to 3.00 V; IF=5 mA |
| Forward Voltage Bin 17 | 3.00 to 3.15 V; IF=5 mA |
| Chromaticity Bin 1 Coordinates | (0.274,0.226), (0.274,0.258), (0.294,0.286), (0.294,0.254); CIE 1931, IF=5 mA |
| Chromaticity Bin 2 Coordinates | (0.274,0.258), (0.274,0.291), (0.294,0.319), (0.294,0.286); CIE 1931, IF=5 mA |
| Chromaticity Bin 3 Coordinates | (0.294,0.254), (0.294,0.286), (0.314,0.315), (0.314,0.282); CIE 1931, IF=5 mA |
| Chromaticity Bin 4 Coordinates | (0.294,0.286), (0.294,0.319), (0.314,0.347), (0.314,0.315); CIE 1931, IF=5 mA |
| Chromaticity Bin 5 Coordinates | (0.314,0.282), (0.314,0.315), (0.334,0.343), (0.334,0.311); CIE 1931, IF=5 mA |
| Chromaticity Bin 6 Coordinates | (0.314,0.315), (0.314,0.347), (0.334,0.376), (0.334,0.343); CIE 1931, IF=5 mA |
| Chromaticity Coordinate Tolerance | ±0.01 |
| Carrier Tape Loaded Quantity | 2000 pcs per reel |
| Reflow Soldering Limit | Not more than two times |
| Post-Opening Storage Condition | 30 °C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5 °C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260 °C max |
| Time Above 255 °C | 10 sec max |
| Time Above 217 °C | 30 sec max |
| Preheating Temperature Range | 150 to 200 °C |
| Preheating Time | 60 to 120 sec |
| Reflow Preheating Duration | 60 to 150 sec |
| Soldering Iron Power | 25 W max |
| Hand Soldering Dwell | Less than 350 °C for 3 seconds, once per terminal |
| Datasheet Status | request_only |
Product Overview
15-11_BHC-AN1P2_2T is an EVERLIGHT LED described by the manufacturer datasheet as an SMD pure white LED. The extracted device selection data lists InGaN chip material, pure white emitted color, and yellow diffused resin. The datasheet part identification is 15-11/T1D-AQRHY/2T.
The device is specified in a 15-11 SMD-B package, with dimensions not text-extractable from the source facts. Packaging information states that it is supplied in 8 mm tape on a 7 inch reel, with 2000 pieces per reel.
Electrical and optical ratings include 5 V reverse voltage, 10 mA forward current, 40 mA peak forward current at duty 1/10 and 1 kHz, and 40 mW power dissipation at Ta=25°C. At IF=5 mA and Ta=25°C, luminous intensity is specified from 72.0 to 180.0 mcd, forward voltage from 2.70 to 3.15 V, and viewing angle as 140 degrees typical.
Assembly guidance includes Pb-free reflow peak temperature of 260°C max, not more than two reflow cycles, and hand soldering below 350°C for 3 seconds once per terminal using a soldering iron rated 25 W max.
Key Features
- SMD pure white LED with InGaN chip material
- Yellow diffused resin listed in selection guide
- 15-11 SMD-B package for surface mounting
- 72.0 to 180.0 mcd at IF=5 mA
- 140 degree typical viewing angle at IF=5 mA
- 2.70 to 3.15 V forward voltage range
- 10 mA forward current absolute maximum rating
- 40 mA peak forward current at 1 kHz
- 2000 V HBM electrostatic discharge rating
- Supplied 2000 pieces per 7 inch reel
Typical Applications
- Pure white SMD LED output
- Wide-angle visible indication
- Low-current 5 mA optical designs
- Reel-fed SMT assembly
- Boards using Pb-free reflow
- Applications requiring chromaticity bin control
Procurement Notes
When requesting a quote for 15-11_BHC-AN1P2_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What is the emitted color of 15-11_BHC-AN1P2_2T?
The extracted EVERLIGHT datasheet facts identify the emitted color as Pure White. The same selection guide lists the chip material as InGaN and the resin color as Yellow Diffused.
What forward voltage range is specified at 5 mA?
At IF=5 mA and Ta=25°C, the forward voltage is specified from 2.70 V minimum to 3.15 V maximum. Forward voltage tolerance is listed as ±0.1 V.
How is this LED packaged for assembly?
The package is described as a 15-11 SMD-B package, supplied in 8 mm tape on a 7 inch reel. The carrier tape loaded quantity is 2000 pieces per reel.
What soldering limits are listed in the datasheet facts?
The reflow soldering rating is 260°C for 10 seconds, with a Pb-free reflow peak temperature of 260°C max. Reflow is limited to not more than two times.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.