Specifications
| Type | Description |
|---|---|
| Part Number | 15-21-G6C-A0N1P2B0E-2T-AM |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 15-215 SMD LED package; dimensions shown in package drawing, unit mm, tolerances ±0.1 mm unless specified |
| Datasheet Part Number | 15-215/G7C-BN1P2B/2T |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 28.5 min, 72.0 max mcd |
| Viewing Angle | 140 typ deg |
| Peak Wavelength | 575 typ nm |
| Dominant Wavelength | 567.5 min, 575.5 max nm |
| Spectrum Radiation Bandwidth | 20 typ nm |
| Forward Voltage | 1.75 min, 2.35 max V |
| Reverse Current | 10 max μA |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.1 V |
| Reverse Operation Limitation | Device is not designed for reverse operation |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd |
| Dominant Wavelength Bin C15 | 567.5 to 569.5 nm |
| Dominant Wavelength Bin C16 | 569.5 to 571.5 nm |
| Dominant Wavelength Bin C17 | 571.5 to 573.5 nm |
| Dominant Wavelength Bin C18 | 573.5 to 575.5 nm |
| Forward Voltage Bin 0 | 1.75 to 1.95 V |
| Forward Voltage Bin 1 | 1.95 to 2.15 V |
| Forward Voltage Bin 2 | 2.15 to 2.35 V |
| Tape Reel Diameter | 7 inch |
| Loaded Quantity | 2000 pcs per reel |
| Moisture Storage After Opening | 30 °C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5 °C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260 °C max |
| Pb-Free Reflow Time Above 255°C | 10 sec max |
| Pb-Free Reflow Time Above 217°C | 60 to 150 sec |
| Pb-Free Reflow Preheating Temperature | 150 to 200 °C |
| Reflow Soldering Count | Not more than two times |
| Soldering Iron Power | 25 W max |
| Datasheet Status | request_only |
Product Overview
15-21-G6C-A0N1P2B0E-2T-AM is an EVERLIGHT SMD mono-color LED associated with the manufacturer datasheet header part number 15-215/G7C-BN1P2B/2T. The device selection guide specifies AlGaInP chip material, Brilliant Yellow Green emitted color, and water clear resin.
Electrical ratings at Ta=25°C include 25 mA forward current, 60 mA peak forward current under duty 1/10 at 1 kHz, 60 mW power dissipation, 5 V reverse voltage for test conditions, and 2000 V HBM electrostatic discharge rating. The device is not designed for reverse operation.
Optical and electrical characteristics at IF=20 mA include 28.5 to 72.0 mcd luminous intensity, 140 degree typical viewing angle, 575 nm typical peak wavelength, 567.5 to 575.5 nm dominant wavelength, 20 nm typical spectrum radiation bandwidth, and 1.75 to 2.35 V forward voltage. Assembly guidance covers Pb-free reflow to 260°C max, hand soldering at 350°C for 3 seconds, and not more than two reflow soldering cycles.
Key Features
- AlGaInP chip material for Brilliant Yellow Green emission
- Water clear resin specified in device selection guide
- 15-215 SMD LED package with millimeter drawing dimensions
- 28.5 to 72.0 mcd luminous intensity at 20 mA
- 140 degree typical viewing angle at 20 mA
- 575 nm typical peak wavelength at 20 mA
- 1.75 to 2.35 V forward voltage at 20 mA
- 25 mA forward current absolute maximum rating
- -40 to +85 °C operating temperature range
- Pb-free reflow peak temperature rated 260 °C max
Typical Applications
- Surface-mount status indicators
- Brilliant yellow green indication
- Panel and keypad indicators
- Compact electronic display points
- Wavelength-binned LED assemblies
- Current-driven indicator circuits
Procurement Notes
When requesting a quote for 15-21-G6C-A0N1P2B0E-2T-AM, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 15-21-G6C-A0N1P2B0E-2T-AM emit?
The extracted datasheet facts identify the emitted color as Brilliant Yellow Green. The device selection guide also lists AlGaInP chip material and water clear resin for this SMD mono-color LED.
What forward voltage range is specified at 20 mA?
At IF=20 mA and Ta=25°C, the forward voltage is specified from 1.75 V minimum to 2.35 V maximum. The extracted facts also list a forward voltage tolerance of ±0.1 V.
Can this LED be used in reverse operation?
No. The datasheet facts state that the device is not designed for reverse operation. The 5 V reverse voltage condition is applied to the reverse current test, where reverse current is specified as 10 μA maximum.
What soldering limits apply to this SMD LED?
The soldering facts list reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. Pb-free reflow peak temperature is 260°C maximum, and reflow soldering should occur not more than two times.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.