Specifications
| Type | Description |
|---|---|
| Part Number | 15-21_R6C-BK1L2VY_2T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimension drawing provided, unit mm, tolerance ±0.1 mm unless otherwise specified |
| Datasheet Part Number | 15-215/G7C-BN1P2B/2T; shown in datasheet header |
| Chip Material | AlGaInP; device selection guide |
| Emitted Color | Brilliant Yellow Green; device selection guide |
| Resin Color | Water Clear; device selection guide |
| Reverse Voltage | 5 V; absolute maximum rating, Ta=25°C |
| Forward Current | 25 mA; absolute maximum rating, Ta=25°C |
| Peak Forward Current | 60 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 60 mW; absolute maximum rating, Ta=25°C |
| Electrostatic Discharge | 2000 V; HBM |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +90 °C; absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec; soldering temperature rating |
| Hand Soldering Temperature | 350 °C for 3 sec; soldering temperature rating |
| Luminous Intensity | 28.5 min, 72.0 max mcd; IF=20 mA, Ta=25°C |
| Viewing Angle | 140 deg typ; 2θ1/2, Ta=25°C |
| Peak Wavelength | 575 nm typ; IF=20 mA, Ta=25°C |
| Dominant Wavelength | 567.5 min, 575.5 max nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 20 nm typ; IF=20 mA, Ta=25°C |
| Forward Voltage | 1.75 min, 2.35 max V; IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max; VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11%; measurement tolerance |
| Dominant Wavelength Tolerance | ±1 nm; measurement tolerance |
| Forward Voltage Tolerance | ±0.1 V; measurement tolerance |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd; IF=20 mA |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd; IF=20 mA |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd; IF=20 mA |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd; IF=20 mA |
| Dominant Wavelength Bin C15 | 567.5 to 569.5 nm; IF=20 mA |
| Dominant Wavelength Bin C16 | 569.5 to 571.5 nm; IF=20 mA |
| Dominant Wavelength Bin C17 | 571.5 to 573.5 nm; IF=20 mA |
| Dominant Wavelength Bin C18 | 573.5 to 575.5 nm; IF=20 mA |
| Forward Voltage Bin 0 | 1.75 to 1.95 V; IF=20 mA |
| Forward Voltage Bin 1 | 1.95 to 2.15 V; IF=20 mA |
| Forward Voltage Bin 2 | 2.15 to 2.35 V; IF=20 mA |
| Loaded Quantity | 2000 pcs per reel; carrier tape dimensions |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel; features |
| Floor Life After Opening | 168 hours / 7 days; after opening package, keep LEDs at 30°C or less and 60%RH or less |
| Storage After Opening | 30°C or less, 60%RH or less; after opening moisture-proof package |
| Baking Treatment | 60±5°C for 24 hours; if silica gel faded or LEDs exceeded storage time |
| Reflow Limit | No more than two times; reflow soldering process |
| Datasheet Status | request_only |
Product Overview
15-21_R6C-BK1L2VY_2T is an EVERLIGHT mono-color SMD LED in the LED category. The supplied facts describe an SMD B package with dimensions in millimeters and ±0.1 mm tolerance unless otherwise specified. The datasheet header shown in the extracted data lists 15-215/G7C-BN1P2B/2T, while the CMS product part number is 15-21_R6C-BK1L2VY_2T.
The device selection guide identifies an AlGaInP chip, brilliant yellow green emitted color, and water-clear resin. At IF=20 mA and Ta=25°C, the LED is specified for 28.5 to 72.0 mcd luminous intensity, 575 nm typical peak wavelength, 567.5 to 575.5 nm dominant wavelength, 20 nm typical spectrum radiation bandwidth, and 1.75 to 2.35 V forward voltage.
Assembly and handling data include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and no more than two reflow cycles. Tape/reel packaging uses 8 mm tape on a 7 inch reel with 2000 pieces per reel. After opening, storage is limited to 168 hours at 30°C or less and 60%RH or less, with baking at 60±5°C for 24 hours under the stated conditions.
Key Features
- Mono-color SMD LED in SMD B package
- AlGaInP chip with brilliant yellow green emission
- Water-clear resin specified in device selection guide
- 28.5 to 72.0 mcd at IF=20 mA
- 575 nm typical peak wavelength at IF=20 mA
- 567.5 to 575.5 nm dominant wavelength range
- 140 degree typical viewing angle at Ta=25°C
- 1.75 to 2.35 V forward voltage range
- 25 mA continuous forward current rating
- 8 mm tape on 7 inch reel packaging
- 2000 pieces loaded per reel
- Reflow soldering rated 260°C for 10 seconds
Typical Applications
- Brilliant yellow green status indicators
- SMD indicator LED assemblies
- Wide-angle panel indication
- Color-binned LED production
- Tape-and-reel SMT assembly
- Low-current visual indication
- Compact PCB-mounted LED indication
Procurement Notes
When requesting a quote for 15-21_R6C-BK1L2VY_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 15-21_R6C-BK1L2VY_2T emit?
The extracted datasheet facts identify the emitted color as brilliant yellow green. The device selection guide also lists an AlGaInP chip material and water-clear resin for this mono-color SMD LED.
What are the main optical specifications at IF=20 mA?
At IF=20 mA and Ta=25°C, the LED is specified for 28.5 to 72.0 mcd luminous intensity, 575 nm typical peak wavelength, 567.5 to 575.5 nm dominant wavelength, and 20 nm typical spectrum radiation bandwidth.
What soldering limits are specified for this LED?
The extracted facts specify reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. The reflow soldering process is limited to no more than two times.
How is this EVERLIGHT LED packaged for assembly?
The packaging facts list 8 mm tape on a 7 inch diameter reel. The carrier tape information specifies a loaded quantity of 2000 pieces per reel.
What storage conditions apply after opening the package?
After opening the moisture-proof package, the facts specify storage at 30°C or less and 60%RH or less. Floor life after opening is 168 hours, or 7 days.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.