Specifications
| Type | Description |
|---|---|
| Part Number | 15-21_R6C-FQ1R1B_2T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions shown in drawing, unit mm, tolerance ±0.1 mm unless specified |
| Product Number | 15-215/G7C-BN1P2B/2T |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V HBM |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 28.5 to 72.0 mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | 140 deg, 2θ1/2, Ta=25°C |
| Peak Wavelength | 575 nm typical at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 567.5 to 575.5 nm at IF=20 mA, Ta=25°C |
| Spectral Radiation Bandwidth | 20 nm typical at IF=20 mA, Ta=25°C |
| Forward Voltage | 1.75 to 2.35 V at IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.1 V |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd at IF=20 mA |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd at IF=20 mA |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd at IF=20 mA |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd at IF=20 mA |
| Dominant Wavelength Bin C15 | 567.5 to 569.5 nm at IF=20 mA |
| Dominant Wavelength Bin C16 | 569.5 to 571.5 nm at IF=20 mA |
| Dominant Wavelength Bin C17 | 571.5 to 573.5 nm at IF=20 mA |
| Dominant Wavelength Bin C18 | 573.5 to 575.5 nm at IF=20 mA |
| Forward Voltage Bin 0 | 1.75 to 1.95 V at IF=20 mA |
| Forward Voltage Bin 1 | 1.95 to 2.15 V at IF=20 mA |
| Forward Voltage Bin 2 | 2.15 to 2.35 V at IF=20 mA |
| Tape/Reel Package | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 2000 pcs per reel |
| Moisture Storage After Opening | 30°C or less and 60%RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 30 sec max |
| Preheat Temperature Range | 150 to 200°C |
| Preheat Time | 60 to 120 sec |
| Maximum Reflow Cycles | 2 times |
| Datasheet Status | request_only |
Product Overview
15-21_R6C-FQ1R1B_2T is an EVERLIGHT mono-color SMD LED categorized as an LED component. The extracted datasheet facts describe an SMD B package, with package dimensions provided in the drawing in millimeters and a general tolerance of ±0.1 mm unless otherwise specified.
The device selection data identifies an AlGaInP chip, Brilliant Yellow Green emitted color, and Water Clear resin. At IF=20 mA and Ta=25°C, the optical and electrical data includes 28.5 to 72.0 mcd luminous intensity, 575 nm typical peak wavelength, 567.5 to 575.5 nm dominant wavelength, 20 nm typical spectral radiation bandwidth, and 1.75 to 2.35 V forward voltage.
Assembly and handling limits include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and a Pb-free reflow profile with 260°C maximum peak temperature. The part is supplied as 8 mm tape on a 7 inch reel with 2000 pieces per reel, supporting SMD assembly workflows.
Key Features
- Mono-color SMD LED in SMD B package
- AlGaInP chip with Brilliant Yellow Green emission
- Water Clear resin specified in device selection guide
- 28.5 to 72.0 mcd luminous intensity at 20 mA
- 567.5 to 575.5 nm dominant wavelength range
- 575 nm typical peak wavelength at 20 mA
- 140 degree viewing angle specified as 2θ1/2
- 1.75 to 2.35 V forward voltage at 20 mA
- 25 mA forward current absolute maximum rating
- 8 mm tape on 7 inch reel packaging
- 2000 pieces loaded per reel
- Pb-free reflow peak temperature 260°C max
Typical Applications
- SMD status indicators
- Brilliant yellow green visual indicators
- Compact PCB indicator lighting
- Wide-angle panel indication
- Tape-and-reel assembly lines
- Low-current signal indication
Procurement Notes
When requesting a quote for 15-21_R6C-FQ1R1B_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 15-21_R6C-FQ1R1B_2T emit?
The extracted datasheet facts identify the emitted color as Brilliant Yellow Green. The device uses AlGaInP chip material and has a dominant wavelength range of 567.5 to 575.5 nm at IF=20 mA and Ta=25°C.
What is the forward voltage range for this LED?
At IF=20 mA and Ta=25°C, the forward voltage is specified from 1.75 to 2.35 V. The datasheet also lists forward voltage bins of 1.75 to 1.95 V, 1.95 to 2.15 V, and 2.15 to 2.35 V.
How is this EVERLIGHT LED packaged for assembly?
The device is supplied as an SMD B package. Tape and reel packaging is specified as 8 mm tape on a 7 inch diameter reel, with a loaded quantity of 2000 pieces per reel.
What soldering limits are listed for this SMD LED?
The absolute soldering ratings list reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. The Pb-free reflow profile specifies a 260°C maximum peak temperature and a maximum of two reflow cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.