Specifications
| Type | Description |
|---|---|
| Part Number | 15-21_Y2C-AN1P2_2T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Product Series | 15-215/G7C-BN1P2B/2T |
| Package Type | SMD-B |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 28.5 min, 72.0 max mcd |
| Viewing Angle | 140 deg typ |
| Peak Wavelength | 575 nm typ |
| Dominant Wavelength | 567.5 min, 575.5 max nm |
| Spectrum Radiation Bandwidth | 20 nm typ |
| Forward Voltage | 1.75 min, 2.35 max V |
| Reverse Current | 10 µA max |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.1 V |
| Reverse Operation Note | Device is not designed for reverse operation |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd |
| Dominant Wavelength Bin C15 | 567.5 to 569.5 nm |
| Dominant Wavelength Bin C16 | 569.5 to 571.5 nm |
| Dominant Wavelength Bin C17 | 571.5 to 573.5 nm |
| Dominant Wavelength Bin C18 | 573.5 to 575.5 nm |
| Forward Voltage Bin 0 | 1.75 to 1.95 V |
| Forward Voltage Bin 1 | 1.95 to 2.15 V |
| Forward Voltage Bin 2 | 2.15 to 2.35 V |
| Package Dimension Tolerance | ±0.1 mm unless mentioned |
| Reel Diameter | 7 inch |
| Carrier Tape Width | 8 mm |
| Loaded Quantity | 2000 pcs per reel |
| Opened Package Storage Condition | 30°C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 60 to 150 sec |
| Preheat Temperature Range | 150 to 200°C |
| Preheat Time | 60 to 120 sec |
| Maximum Reflow Cycles | 2 times |
| Soldering Iron Power | 25 W max |
| Datasheet Status | request_only |
Product Overview
The 15-21_Y2C-AN1P2_2T is an EVERLIGHT SMD Brilliant Yellow Green LED in the SMD-B package. The device selection guide lists an AlGaInP chip material, brilliant yellow green emitted color, and water clear resin color, making it suited to visual indication designs requiring this color output and surface-mount assembly.
At IF=20 mA and Ta=25°C, the datasheet specifies luminous intensity from 28.5 to 72.0 mcd, a 575 nm typical peak wavelength, a 567.5 to 575.5 nm dominant wavelength range, 20 nm typical spectrum radiation bandwidth, and a 140 degree typical viewing angle. Forward voltage is specified from 1.75 to 2.35 V at the same current and temperature.
Absolute maximum ratings include 25 mA forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, 60 mW power dissipation, 5 V reverse voltage for the reverse current test condition, and 2000 V HBM electrostatic discharge. Assembly guidance includes 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and a maximum of two reflow cycles.
Key Features
- SMD-B surface-mount LED package
- Brilliant yellow green AlGaInP chip emission
- Water clear resin construction
- 28.5 to 72.0 mcd luminous intensity
- 575 nm typical peak wavelength
- 140 degree typical viewing angle
- 1.75 to 2.35 V forward voltage
- 25 mA absolute maximum forward current
- 2000 V HBM electrostatic discharge rating
- Tape-and-reel supply, 2000 pieces per reel
Typical Applications
- Yellow-green status indicators
- Surface-mount panel indication
- Compact PCB visual signals
- Wide-angle indicator windows
- Color-coded equipment indicators
- Reflow-assembled LED boards
Procurement Notes
When requesting a quote for 15-21_Y2C-AN1P2_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 15-21_Y2C-AN1P2_2T emit?
The datasheet identifies 15-21_Y2C-AN1P2_2T as an SMD Brilliant Yellow Green LED. It uses an AlGaInP chip, has water clear resin, and specifies a 575 nm typical peak wavelength at IF=20 mA and Ta=25°C.
What are the main electrical ratings for this LED?
Absolute maximum ratings include 25 mA forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, 60 mW power dissipation, and 5 V reverse voltage. The datasheet notes the device is not designed for reverse operation.
What soldering limits are specified in the datasheet?
The soldering ratings list 260°C for 10 seconds reflow soldering and 350°C for 3 seconds hand soldering. The Pb-free reflow profile gives 260°C maximum peak temperature and permits a maximum of two reflow cycles.
How is the 15-21_Y2C-AN1P2_2T packaged for assembly?
The datasheet describes tape-and-reel packaging with 8 mm carrier tape on a 7 inch reel. The loaded quantity is specified as 2000 pieces per reel, and the package drawing note gives ±0.1 mm tolerance unless otherwise mentioned.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.