Specifications
| Type | Description |
|---|---|
| Part Number | 15-22_R6BHC-A06_2T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 15-22 SMD-B; package dimensions shown in drawing, unit mm, tolerance ±0.1 mm unless otherwise specified |
| Datasheet Part Number | 15-22/R6G6C-A32/2T; listed on datasheet pages |
| Chip Code R6 Emitted Color | Brilliant Red; AlGaInP chip material |
| Chip Code G6 Emitted Color | Brilliant Yellow Green; AlGaInP chip material |
| Resin Color | Water Clear; applies to R6 and G6 chips |
| Reverse Voltage | 5 V; absolute maximum rating, Ta=25°C |
| Forward Current R6 | 25 mA; absolute maximum rating, Ta=25°C |
| Forward Current G6 | 25 mA; absolute maximum rating, Ta=25°C |
| Peak Forward Current R6 | 60 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Peak Forward Current G6 | 60 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation R6 | 60 mW; absolute maximum rating, Ta=25°C |
| Power Dissipation G6 | 60 mW; absolute maximum rating, Ta=25°C |
| Electrostatic Discharge R6 | 2000 V; HBM |
| Electrostatic Discharge G6 | 2000 V; HBM |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +90 °C; absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec; absolute maximum soldering temperature |
| Hand Soldering Temperature | 350 °C for 3 sec; absolute maximum soldering temperature |
| Luminous Intensity R6 | 45.0 min, 112.0 max mcd; IF=20 mA, Ta=25°C |
| Luminous Intensity G6 | 28.5 min, 72.0 max mcd; IF=20 mA, Ta=25°C |
| Viewing Angle | 140 deg typ; 2θ1/2, Ta=25°C |
| Peak Wavelength R6 | 632 nm typ; Ta=25°C |
| Peak Wavelength G6 | 575 nm typ; Ta=25°C |
| Dominant Wavelength R6 | 617.5 min, 633.5 max nm; IF=20 mA, Ta=25°C |
| Dominant Wavelength G6 | 567.5 min, 577.5 max nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth R6 | 20 nm typ; Ta=25°C |
| Spectrum Radiation Bandwidth G6 | 20 nm typ; Ta=25°C |
| Forward Voltage R6 | 1.70 min, 2.00 typ, 2.40 max V; IF=20 mA, Ta=25°C |
| Forward Voltage G6 | 1.70 min, 2.00 typ, 2.40 max V; IF=20 mA, Ta=25°C |
| Reverse Current R6 | 10 µA max; VR=5 V, Ta=25°C |
| Reverse Current G6 | 10 µA max; VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11%; electro-optical characteristics and bin ranges |
| Dominant Wavelength Tolerance | ±1 nm; electro-optical characteristics |
| R6 Luminous Intensity Bin P | 45.0 to 72.0 mcd; IF=20 mA |
| R6 Luminous Intensity Bin Q | 72.0 to 112.0 mcd; IF=20 mA |
| G6 Luminous Intensity Bin N | 28.5 to 45.0 mcd; IF=20 mA |
| G6 Luminous Intensity Bin P | 45.0 to 72.0 mcd; IF=20 mA |
| Carrier Tape Loaded Quantity | 2000 pcs per reel; carrier tape dimensions section |
| Tape and Reel Packaging | 8 mm tape on 7 inch diameter reel; feature list |
| Datasheet Status | request_only |
Product Overview
The datasheet-listed chip set includes R6 Brilliant Red and G6 Brilliant Yellow Green emitters using AlGaInP chip material. At IF=20 mA and Ta=25°C, R6 luminous intensity is specified from 45.0 to 112.0 mcd, while G6 luminous intensity is specified from 28.5 to 72.0 mcd. Both channels have 1.70 V minimum, 2.00 V typical, and 2.40 V maximum forward voltage under the same test condition.
For design limits, each channel is rated for 25 mA forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, and 60 mW power dissipation at Ta=25°C. The reverse voltage rating is 5 V, with reverse current limited to 10 µA maximum at VR=5 V and Ta=25°C. Assembly limits include 260°C reflow soldering for 10 sec and 350°C hand soldering for 3 sec. The device is supplied on 8 mm tape with a 7 inch reel, 2000 pieces per reel.
Key Features
- Multi-color SMD LED in 15-22 SMD-B package
- R6 Brilliant Red AlGaInP chip channel
- G6 Brilliant Yellow Green AlGaInP chip channel
- Water clear resin for both LED chips
- 140 deg typical viewing angle at Ta=25°C
- 25 mA forward current rating per channel
- 60 mA peak forward current at pulsed condition
- 1.70 to 2.40 V forward voltage range
- 260°C reflow soldering for 10 sec
- 8 mm tape on 7 inch reel packaging
Typical Applications
- Multi-color status indicators
- Red and green signal displays
- Compact SMD indicator assemblies
- Panel indicator lighting
- Board-level visual indication
- Tape-and-reel SMT production
Procurement Notes
When requesting a quote for 15-22_R6BHC-A06_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What LED colors are listed for this EVERLIGHT part?
The datasheet facts list an R6 Brilliant Red channel and a G6 Brilliant Yellow Green channel. Both channels use AlGaInP chip material and water clear resin.
What is the rated forward current per LED channel?
Both R6 and G6 channels have a 25 mA forward current rating as an absolute maximum rating at Ta=25°C. The peak forward current is 60 mA under duty 1/10 at 1 kHz.
What optical angle is specified for this SMD LED?
The listed viewing angle is 140 deg typical, specified as 2θ1/2 at Ta=25°C. R6 peak wavelength is 632 nm typical and G6 peak wavelength is 575 nm typical.
How is the device packaged for assembly handling?
The datasheet facts identify tape-and-reel packaging using 8 mm tape on a 7 inch diameter reel. The carrier tape loaded quantity is 2000 pieces per reel.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.