15-22_R6G6C-A32_2T Multi-color SMD LED

Specifications

Product Overview

EVERLIGHT 15-22_R6G6C-A32_2T is a multi-color SMD LED built with Brilliant Red R6 and Brilliant Yellow Green G6 emitters. Both chip codes use AlGaInP material, and the resin color is specified as water clear. The listed package is SMD B, with package dimensions given in millimeters and tolerances of ±0.1 mm unless otherwise stated.

At Ta=25°C, each emitter has a 25 mA forward current rating, 60 mW power dissipation, 5 V reverse voltage rating, and 2000 V HBM electrostatic discharge rating. Peak forward current is 60 mA for each color under a 1/10 duty cycle at 1 kHz. Electrical characteristics at IF=20 mA include 1.70 V minimum, 2.00 V typical, and 2.40 V maximum forward voltage for both colors.

Optical data includes a 140 deg viewing angle, 632 nm typical peak wavelength for R6, and 575 nm typical peak wavelength for G6. Assembly limits include 260°C for 10 sec reflow soldering, 350°C for 3 sec hand soldering, and not more than two reflow cycles.

Key Features

• Brilliant Red R6 and Brilliant Yellow Green G6 emitters
• AlGaInP chip material for both LED colors
• Water clear resin for R6 and G6 emitters
• SMD B package with ±0.1 mm dimension tolerance
• 140 deg viewing angle at Ta=25°C
• 25 mA forward current rating per color
• 60 mA peak current at 1/10 duty, 1 kHz
• 1.70 V to 2.40 V forward voltage range
• 2000 V HBM electrostatic discharge rating per color
• 8 mm tape on 7 inch reel packaging

Typical Applications

• Color-coded visual indicators
• Red and green status displays
• SMD indicator assemblies
• Compact panel indication
• Reflow-assembled LED boards
• Tape-and-reel production builds

Procurement Notes

When requesting a quote for 15-22_R6G6C-A32_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.