Specifications
| Type | Description |
|---|---|
| Part Number | 15-22SDRSYGC_S530-A3_E2_TR8 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package Case | 15-22 SMD B; package dimensions in mm with tolerances unless mentioned ±0.1 mm |
| Series / Datasheet Part | 15-22/R6G6C-A32/2T |
| Package Media | 8 mm tape on 7 inch diameter reel |
| LED Type | Multi-color type |
| Chip Code R6 Emitted Color | Brilliant Red |
| Chip Code R6 Material | AlGaInP |
| Chip Code G6 Emitted Color | Brilliant Yellow Green |
| Chip Code G6 Material | AlGaInP |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current R6 | 25 mA |
| Forward Current G6 | 25 mA |
| Peak Forward Current R6 | 60 mA |
| Peak Forward Current G6 | 60 mA |
| Power Dissipation R6 | 60 mW |
| Power Dissipation G6 | 60 mW |
| Electrostatic Discharge R6 | 2000 V HBM |
| Electrostatic Discharge G6 | 2000 V HBM |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity R6 | 45.0 min, 112.0 max mcd at IF=20 mA, Ta=25°C |
| Luminous Intensity G6 | 28.5 min, 72.0 max mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | 140 deg typ |
| Peak Wavelength R6 | 632 nm typ |
| Peak Wavelength G6 | 575 nm typ |
| Dominant Wavelength R6 | 617.5 min, 633.5 max nm |
| Dominant Wavelength G6 | 567.5 min, 577.5 max nm |
| Spectrum Radiation Bandwidth R6 | 20 nm typ |
| Spectrum Radiation Bandwidth G6 | 20 nm typ |
| Forward Voltage R6 | 1.70 min, 2.00 typ, 2.40 max V |
| Forward Voltage G6 | 1.70 min, 2.00 typ, 2.40 max V |
| Reverse Current R6 | 10 µA max at VR=5 V, Ta=25°C |
| Reverse Current G6 | 10 µA max at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| R6 Luminous Intensity Bin P | 45.0 min, 72.0 max mcd at IF=20 mA |
| R6 Luminous Intensity Bin Q | 72.0 min, 112.0 max mcd at IF=20 mA |
| G6 Luminous Intensity Bin N | 28.5 min, 45.0 max mcd at IF=20 mA |
| G6 Luminous Intensity Bin P | 45.0 min, 72.0 max mcd at IF=20 mA |
| Carrier Tape Loaded Quantity | 2000 pcs per reel |
| Moisture Storage After Opening | 30°C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-free Reflow Peak Temperature | 260°C max |
| Pb-free Reflow Time Above 255°C | 10 sec max |
| Pb-free Reflow Time Above 217°C | 60 to 150 sec |
| Preheat Temperature Range | 150 to 200°C |
| Preheat Time | 60 to 120 sec |
| Reflow Cycle Limit | No more than two times |
| Soldering Iron Power Limit | 25 W max |
| Datasheet Status | request_only |
Product Overview
15-22SDRSYGC_S530-A3_E2_TR8 is an EVERLIGHT bi-color SMD LED identified in the manufacturer datasheet as series 15-22/R6G6C-A32/2T. The device is a multi-color LED type using R6 brilliant red and G6 brilliant yellow green AlGaInP chips, both encapsulated with water clear resin.
Electrical ratings at Ta=25°C include 5 V reverse voltage, 25 mA forward current per color, 60 mA peak forward current per color under duty 1/10 at 1 kHz, and 60 mW power dissipation per color. Electro-optical data at IF=20 mA gives 45.0 to 112.0 mcd for R6 and 28.5 to 72.0 mcd for G6, with 1.70 to 2.40 V forward voltage for both chips.
The 15-22 SMD B package is supplied in 8 mm tape on a 7 inch reel with 2000 pieces per reel. Assembly limits include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and no more than two reflow cycles.
Key Features
- Bi-color SMD LED in 15-22 SMD B package
- R6 brilliant red AlGaInP chip
- G6 brilliant yellow green AlGaInP chip
- Water clear resin for both chip colors
- 140 degree typical viewing angle at Ta=25°C
- 25 mA forward current rating per color
- 60 mA peak forward current per color
- 1.70 to 2.40 V forward voltage range
- 8 mm tape on 7 inch reel packaging
- 2000 pieces loaded per reel
Typical Applications
- Bi-color status indicators
- Multi-color signal displays
- Surface-mount indicator assemblies
- Red and green visual signaling
- Compact PCB indicator layouts
- Reflow-assembled LED boards
Procurement Notes
When requesting a quote for 15-22SDRSYGC_S530-A3_E2_TR8, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What LED colors does 15-22SDRSYGC_S530-A3_E2_TR8 provide?
The datasheet identifies two AlGaInP chips: R6 emits brilliant red and G6 emits brilliant yellow green. Both chips use water clear resin, and the device is listed as a multi-color bi-color SMD LED.
What are the forward current ratings for each color?
At Ta=25°C, the absolute maximum forward current is 25 mA for the R6 brilliant red chip and 25 mA for the G6 brilliant yellow green chip. Peak forward current is 60 mA per color at duty 1/10 and 1 kHz.
What luminous intensity ranges are specified at 20 mA?
At IF=20 mA and Ta=25°C, R6 luminous intensity is specified from 45.0 to 112.0 mcd. G6 luminous intensity is specified from 28.5 to 72.0 mcd, with a luminous intensity tolerance of ±11%.
What soldering limits apply to this SMD LED?
The datasheet gives a reflow soldering temperature of 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. The Pb-free profile limits peak temperature to 260°C max and allows no more than two reflow cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 31, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.