Specifications
| Type | Description |
|---|---|
| Part Number | 16-213_R6C-A2225VZ_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package Case | SMD B; package dimensions shown in datasheet, unit mm, tolerances ±0.1 mm unless otherwise mentioned |
| Chip Material | InGaN |
| Emitted Color | Blue |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, absolute maximum rating, Ta=25°C |
| Forward Current | 25 mA, absolute maximum rating, Ta=25°C |
| Peak Forward Current | 100 mA, duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 95 mW, absolute maximum rating, Ta=25°C |
| Electrostatic Discharge | 150 V HBM, absolute maximum rating, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 28.5 min, 72.0 max mcd, IF=5 mA, Ta=25°C |
| Viewing Angle | 120 deg typ, 2θ1/2, Ta=25°C |
| Peak Wavelength | 468 nm typ, IF=5 mA, Ta=25°C |
| Dominant Wavelength | 464.5 min, 476.5 max nm, IF=5 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 35 nm typ, IF=5 mA, Ta=25°C |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V, IF=5 mA, Ta=25°C |
| Reverse Current | 50 µA max, VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.05 V |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd, IF=5 mA |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd, IF=5 mA |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd, IF=5 mA |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd, IF=5 mA |
| Dominant Wavelength Bin A9 | 464.5 to 467.5 nm, IF=5 mA |
| Dominant Wavelength Bin A10 | 467.5 to 470.5 nm, IF=5 mA |
| Dominant Wavelength Bin A11 | 470.5 to 473.5 nm, IF=5 mA |
| Dominant Wavelength Bin A12 | 473.5 to 476.5 nm, IF=5 mA |
| Carrier Tape Loaded Quantity | 3000 pcs per reel |
| Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Floor Life After Opening | 1 year at 30°C or less and 60% RH or less |
| Storage Before Opening | 30°C or less, 90% RH or less, moisture-proof bag unopened |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or storage time exceeded |
| Maximum Reflow Cycles | 2 times max |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 16-213_R6C-A2225VZ_3T is a mono-color blue SMD LED built with InGaN chip material and water clear resin. It is categorized as an LED and supplied in an SMD B package, with package dimensions shown in the datasheet in millimeters and general tolerances of ±0.1 mm unless otherwise mentioned.
At IF=5 mA and Ta=25°C, the device provides 28.5 to 72.0 mcd luminous intensity, a 468 nm typical peak wavelength, and a 464.5 to 476.5 nm dominant wavelength range. The specified spectrum radiation bandwidth is 35 nm typical, and the viewing angle is 120 degrees typical.
Electrical and assembly constraints include 25 mA forward current, 100 mA peak forward current at duty 1/10 and 1 kHz, 5 V reverse voltage, and 95 mW power dissipation. Assembly ratings include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and a maximum of two reflow cycles. Packaging is 8 mm tape on a 7 inch reel with 3000 pieces per reel.
Key Features
- InGaN chip material for blue emission
- Water clear resin in SMD B package
- 28.5 to 72.0 mcd luminous intensity at 5 mA
- 464.5 to 476.5 nm dominant wavelength range
- 468 nm typical peak wavelength at 5 mA
- 120 degree typical viewing angle
- 2.7 to 3.7 V forward voltage at 5 mA
- 25 mA forward current absolute maximum rating
- 100 mA peak forward current, duty 1/10 at 1 kHz
- 8 mm tape on 7 inch reel packaging
Typical Applications
- Blue status indicators
- Surface-mount indicator panels
- Compact blue signal lighting
- Low-current visual indication
- Wide-angle light output designs
- Reflow-assembled LED boards
Procurement Notes
When requesting a quote for 16-213_R6C-A2225VZ_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of LED is 16-213_R6C-A2225VZ_3T?
16-213_R6C-A2225VZ_3T is an EVERLIGHT mono-color blue SMD LED. The datasheet identifies InGaN chip material, blue emitted color, water clear resin, and an SMD B package.
What are the main optical ratings at IF=5 mA?
At IF=5 mA and Ta=25°C, luminous intensity is 28.5 to 72.0 mcd, peak wavelength is 468 nm typical, dominant wavelength is 464.5 to 476.5 nm, and viewing angle is 120 degrees typical.
What soldering limits are specified for this LED?
The datasheet specifies 260°C for 10 seconds for reflow soldering and 350°C for 3 seconds for hand soldering. Reflow soldering is limited to two cycles maximum.
How is 16-213_R6C-A2225VZ_3T packaged for assembly?
The part is supplied as 8 mm tape on a 7 inch diameter reel. The carrier tape loaded quantity is listed as 3000 pieces per reel.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.