Specifications
| Type | Description |
|---|---|
| Part Number | 16-213_T3D-AP1Q2QY_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | LED |
| Package / Case | SMD B package; package dimensions shown graphically, units mm, tolerances unless mentioned ±0.1 mm |
| Datasheet Part Number | 16-213/BHC-AN1P2/3T |
| Chip Material | InGaN |
| Emitted Color | Blue |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V; absolute maximum rating, Ta=25°C |
| Forward Current | 25 mA; absolute maximum rating, Ta=25°C |
| Peak Forward Current | 100 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 95 mW; absolute maximum rating, Ta=25°C |
| Electrostatic Discharge | 150 V; HBM, absolute maximum rating |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +90 °C; absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec; soldering temperature rating |
| Hand Soldering Temperature | 350 °C for 3 sec; soldering temperature rating |
| Luminous Intensity | 28.5 min, 72.0 max mcd; IF=5 mA, Ta=25°C; tolerance ±11% |
| Viewing Angle | 120 deg typ; 2θ1/2, Ta=25°C |
| Peak Wavelength | 468 nm typ; IF=5 mA, Ta=25°C |
| Dominant Wavelength | 464.5 min, 476.5 max nm; IF=5 mA, Ta=25°C; tolerance ±1 nm |
| Spectrum Radiation Bandwidth | 35 nm typ; IF=5 mA, Ta=25°C |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V; IF=5 mA, Ta=25°C; tolerance ±0.05 V |
| Reverse Current | 50 µA max; VR=5 V, Ta=25°C |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd; IF=5 mA |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd; IF=5 mA |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd; IF=5 mA |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd; IF=5 mA |
| Dominant Wavelength Bin A9 | 464.5 to 467.5 nm; IF=5 mA |
| Dominant Wavelength Bin A10 | 467.5 to 470.5 nm; IF=5 mA |
| Dominant Wavelength Bin A11 | 470.5 to 473.5 nm; IF=5 mA |
| Dominant Wavelength Bin A12 | 473.5 to 476.5 nm; IF=5 mA |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Pb-Free | Pb-free |
| RoHS Compliance | Product itself will remain within RoHS compliant version |
| Moisture-Proof Bag Storage Before Opening | 30°C or less and 90% RH or less |
| Floor Life After Opening | 1 year; 30°C or less and 60% RH or less |
| Baking Treatment | 60±5°C for 24 hours; if desiccant has faded or storage time exceeded |
| Maximum Reflow Count | 2 times; reflow soldering |
| Soldering Iron Power | 25 W max; hand soldering, each terminal |
| Datasheet Status | request_only |
Product Overview
The 16-213_T3D-AP1Q2QY_3T is listed here as an EVERLIGHT SMD blue LED. The manufacturer datasheet header references 16-213/BHC-AN1P2/3T, with the device selection guide specifying an InGaN chip, blue emitted color, and water-clear resin.
Optical characteristics at IF=5 mA and Ta=25°C include luminous intensity from 28.5 to 72.0 mcd with ±11% tolerance, 120 degree typical viewing angle, 468 nm typical peak wavelength, 464.5 to 476.5 nm dominant wavelength with ±1 nm tolerance, and 35 nm typical spectrum radiation bandwidth. Forward voltage is specified from 2.7 V minimum to 3.3 V typical and 3.7 V maximum at the same test current.
The SMD B package uses graphic package dimensions in millimeters with ±0.1 mm tolerance unless otherwise noted. Assembly and storage guidance includes 260°C reflow for 10 seconds, 350°C hand soldering for 3 seconds, a maximum of two reflow cycles, 25 W maximum soldering iron power, and moisture storage limits before and after opening.
Key Features
- SMD B package with millimeter package dimensions
- InGaN chip with blue emitted color
- Water-clear resin specified in device selection guide
- 28.5 to 72.0 mcd luminous intensity at 5 mA
- 120 degree typical viewing angle at Ta=25°C
- 468 nm typical peak wavelength at 5 mA
- 2.7 to 3.7 V forward voltage range
- 25 mA forward current absolute maximum rating
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
- Pb-free product with RoHS compliant version
- Maximum two reflow soldering cycles
Typical Applications
- Blue status indicators
- SMD board indication
- Panel indicator lighting
- Portable device indication
- Consumer electronics indicators
- Compact blue signal lamps
- Reflow-assembled LED boards
Procurement Notes
When requesting a quote for 16-213_T3D-AP1Q2QY_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of LED is 16-213_T3D-AP1Q2QY_3T?
16-213_T3D-AP1Q2QY_3T is described from the provided facts as an EVERLIGHT SMD blue LED. The datasheet selection guide specifies an InGaN chip, blue emitted color, and water-clear resin.
What optical output is specified at 5 mA?
At IF=5 mA and Ta=25°C, luminous intensity is specified from 28.5 mcd minimum to 72.0 mcd maximum with ±11% tolerance. The typical viewing angle is 120 degrees.
What wavelength range does this blue LED cover?
The datasheet facts list a 468 nm typical peak wavelength at IF=5 mA and Ta=25°C. Dominant wavelength is specified from 464.5 nm minimum to 476.5 nm maximum with ±1 nm tolerance.
What are the main electrical limits for this part?
Absolute maximum ratings include 5 V reverse voltage, 25 mA forward current, 100 mA peak forward current at duty 1/10 and 1 kHz, and 95 mW power dissipation at Ta=25°C.
How is the part packaged for assembly?
The part is specified for 8 mm tape on a 7 inch diameter reel, with 3000 pieces per reel. The package is an SMD B package with dimensions shown graphically in millimeters.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.