Specifications
| Type | Description |
|---|---|
| Part Number | 16-213_Y2C-AN2Q1B_3T |
| Manufacturer | EVERLIGHT |
| Product Type | Blue SMD LED |
| Category | LED |
| Package / Case | SMD-B; package dimensions shown in drawing, unit mm, tolerances ±0.1 mm unless otherwise stated |
| Emitted Color | Blue |
| Chip Material | InGaN |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, absolute maximum rating, Ta=25°C |
| Forward Current | 25 mA, absolute maximum rating, Ta=25°C |
| Peak Forward Current | 100 mA, duty 1/10 @ 1 kHz, Ta=25°C |
| Power Dissipation | 95 mW, absolute maximum rating, Ta=25°C |
| Electrostatic Discharge | 150 V, HBM, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 28.5 min, 72.0 max mcd, IF=5 mA, Ta=25°C |
| Viewing Angle | 120 deg typ, 2θ1/2, Ta=25°C |
| Peak Wavelength | 468 nm typ, IF=5 mA, Ta=25°C |
| Dominant Wavelength | 464.5 min, 476.5 max nm, IF=5 mA, Ta=25°C |
| Spectral Radiation Bandwidth | 35 nm typ, IF=5 mA, Ta=25°C |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V, IF=5 mA, Ta=25°C |
| Reverse Current | 50 µA max, VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.05 V |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd, IF=5 mA |
| Luminous Intensity Bin N2 | 36.0 to 45.0 mcd, IF=5 mA |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd, IF=5 mA |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd, IF=5 mA |
| Dominant Wavelength Bin A9 | 464.5 to 467.5 nm, IF=5 mA |
| Dominant Wavelength Bin A10 | 467.5 to 470.5 nm, IF=5 mA |
| Dominant Wavelength Bin A11 | 470.5 to 473.5 nm, IF=5 mA |
| Dominant Wavelength Bin A12 | 473.5 to 476.5 nm, IF=5 mA |
| Tape and Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Moisture Storage Before Opening | 30°C or less and 90% RH or less |
| Floor Life After Opening | 1 year at 30°C or less and 60% RH or less |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or storage time exceeded |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 60 to 150 sec |
| Preheat Temperature | 150 to 200°C |
| Preheat Time | 60 to 120 sec |
| Maximum Reflow Cycles | 2 times |
| Soldering Iron Power | 25 W max |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 16-213_Y2C-AN2Q1B_3T is a blue SMD LED built with an InGaN chip and water clear resin. The datasheet identifies the component as an LED in an SMD-B package, with package dimensions defined in millimeters and drawing tolerances of ±0.1 mm unless otherwise stated.
At IF=5 mA and Ta=25°C, the LED has a luminous intensity range of 28.5 to 72.0 mcd, a 468 nm typical peak wavelength, and a dominant wavelength range of 464.5 to 476.5 nm. The optical spread is defined by a 120 deg typical viewing angle and 35 nm typical spectral radiation bandwidth.
Electrical limits include 25 mA forward current, 100 mA peak forward current at duty 1/10 and 1 kHz, 5 V reverse voltage, and 95 mW power dissipation at Ta=25°C. Assembly and storage data include 8 mm tape on a 7 inch reel, 3000 pcs per reel, Pb-free reflow peak temperature of 260°C max, and up to 2 reflow cycles.
Key Features
- Blue emitted color with InGaN chip material
- Water clear resin in SMD-B package case
- 28.5 to 72.0 mcd luminous intensity at 5 mA
- 464.5 to 476.5 nm dominant wavelength range
- 468 nm typical peak wavelength at 5 mA
- 120 deg typical viewing angle specification
- 2.7 to 3.7 V forward voltage range
- 25 mA forward current absolute maximum rating
- 260°C max Pb-free reflow peak temperature
- 3000 pcs per 7 inch reel packaging
Typical Applications
- Blue status indicators
- Surface-mount panel indicators
- Compact PCB visual signaling
- Blue wavelength indication circuits
- Reflow-assembled LED boards
- Low-current indicator designs
Procurement Notes
When requesting a quote for 16-213_Y2C-AN2Q1B_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 16-213_Y2C-AN2Q1B_3T emit?
The EVERLIGHT 16-213_Y2C-AN2Q1B_3T emits blue light. The device selection guide identifies the emitted color as blue, with an InGaN chip and water clear resin.
What is the forward voltage at 5 mA?
At IF=5 mA and Ta=25°C, the forward voltage is specified as 2.7 V minimum, 3.3 V typical, and 3.7 V maximum, with a stated forward voltage tolerance of ±0.05 V.
What are the main optical specifications?
At IF=5 mA and Ta=25°C, luminous intensity is 28.5 to 72.0 mcd, peak wavelength is 468 nm typical, dominant wavelength is 464.5 to 476.5 nm, and viewing angle is 120 deg typical.
How is this LED supplied for assembly?
The device is supplied as 8 mm tape on a 7 inch diameter reel. The loaded quantity is specified as 3000 pieces per reel, supporting surface-mount assembly handling.
What reflow soldering limits apply to this part?
The Pb-free reflow profile specifies 260°C maximum peak temperature, 10 seconds maximum above 255°C, 60 to 150 seconds above 217°C, and a maximum of 2 reflow cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.