Specifications
| Type | Description |
|---|---|
| Part Number | 16-213SYGC_S530-E2_TR8 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions shown in drawing, numeric dimensions not available in provided text |
| Emitted Color | Brilliant Green |
| Chip Material | InGaN |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, Ta=25°C absolute maximum rating |
| Forward Current | 25 mA, Ta=25°C absolute maximum rating |
| Peak Forward Current | 100 mA, duty 1/10 at 1 kHz, Ta=25°C absolute maximum rating |
| Power Dissipation | 110 mW, Ta=25°C absolute maximum rating |
| Electrostatic Discharge | 150 V, Ta=25°C absolute maximum rating |
| Operating Temperature | -40 to +85 °C, absolute maximum rating |
| Storage Temperature | -40 to +90 °C, absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 112 min, 225 max mcd, IF=20 mA, Ta=25°C |
| Viewing Angle | 120 typ deg, 2θ1/2, Ta=25°C |
| Peak Wavelength | 518 typ nm, IF=20 mA, Ta=25°C |
| Dominant Wavelength | 520 min, 535 max nm, IF=20 mA, Ta=25°C |
| Spectral Radiation Bandwidth | 35 typ nm, IF=20 mA, Ta=25°C |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V, IF=20 mA, Ta=25°C |
| Reverse Current | 50 max µA, VR=5 V, Ta=25°C |
| Luminous Intensity Bin R1 | 112 to 140 mcd, IF=20 mA |
| Luminous Intensity Bin R2 | 140 to 180 mcd, IF=20 mA |
| Luminous Intensity Bin S1 | 180 to 225 mcd, IF=20 mA |
| Dominant Wavelength Bin X | 520 to 525 nm, IF=20 mA |
| Dominant Wavelength Bin Y | 525 to 530 nm, IF=20 mA |
| Dominant Wavelength Bin Z | 530 to 535 nm, IF=20 mA |
| Luminous Intensity Tolerance | ±11%, measurement tolerance |
| Dominant Wavelength Tolerance | ±1 nm, measurement tolerance |
| Forward Voltage Tolerance | ±0.05 V, measurement tolerance |
| Carrier Tape Loaded Quantity | 3000 pcs per reel |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Reflow Soldering Cycles | Maximum 2 times |
| Floor Life After Opening | 1 year at 30°C or less and 60% RH or less |
| Storage Before Opening | 30°C or less and 90% RH or less, moisture-proof bag unopened |
| Baking Treatment | 60±5°C for 24 hours if desiccant faded or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 16-213SYGC_S530-E2_TR8 is an SMD brilliant green LED based on an InGaN chip and water clear resin. The provided package description identifies an SMD B package, with dimensions shown in the datasheet drawing but without numeric package dimensions in the extracted text.
At IF=20 mA and Ta=25°C, the LED is specified for 112 to 225 mcd luminous intensity, 518 nm typical peak wavelength, 520 to 535 nm dominant wavelength, 35 nm typical spectral radiation bandwidth, and 120 degree typical viewing angle. Forward voltage is specified as 2.7 V minimum, 3.3 V typical, and 3.7 V maximum under the same current and ambient conditions.
Assembly and handling data include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and a maximum of two reflow soldering cycles. Packaging is 8 mm tape on a 7 inch reel with 3000 pieces per reel, supporting surface-mount LED placement workflows.
Key Features
- Brilliant green emission from InGaN LED chip
- Water clear resin package construction
- SMD B surface-mount LED package
- 112 to 225 mcd luminous intensity at 20 mA
- 120 degree typical viewing angle
- 518 nm typical peak wavelength
- 520 to 535 nm dominant wavelength range
- 3.3 V typical forward voltage at 20 mA
- 25 mA absolute maximum forward current
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
- Maximum two reflow soldering cycles
Typical Applications
- Brilliant green status indicators
- Surface-mount visual indication
- PCB-mounted signal lamps
- Equipment front-panel indicators
- Color-coded electronic displays
- Green channel light indication
Procurement Notes
When requesting a quote for 16-213SYGC_S530-E2_TR8, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 16-213SYGC_S530-E2_TR8 emit?
16-213SYGC_S530-E2_TR8 emits brilliant green light. The device selection data lists an InGaN chip material and water clear resin, with a 518 nm typical peak wavelength at IF=20 mA and Ta=25°C.
What is the forward voltage of this EVERLIGHT LED?
The forward voltage is specified at IF=20 mA and Ta=25°C as 2.7 V minimum, 3.3 V typical, and 3.7 V maximum. The listed forward voltage measurement tolerance is ±0.05 V.
How is 16-213SYGC_S530-E2_TR8 packaged for assembly?
The part is supplied in carrier tape packaging with 3000 pieces per reel. The feature list specifies 8 mm tape on a 7 inch diameter reel for tape/reel handling.
What soldering limits apply to this SMD LED?
The soldering limits are 260°C for 10 seconds for reflow soldering and 350°C for 3 seconds for hand soldering. The precautions also specify a maximum of two reflow soldering cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 31, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.