Specifications
| Type | Description |
|---|---|
| Part Number | 16-213UYC_S530-A3_TR8 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 16-213 SMD package; detailed dimensions shown in drawing, unit mm, tolerances ±0.1 mm unless noted |
| Emitted Color | Brilliant Green |
| Chip Material | InGaN |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, absolute maximum rating at Ta=25°C |
| Forward Current | 25 mA, absolute maximum rating at Ta=25°C |
| Peak Forward Current | 100 mA, duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 110 mW, absolute maximum rating at Ta=25°C |
| Electrostatic Discharge | 150 V, absolute maximum rating at Ta=25°C |
| Operating Temperature | -40 to +85 °C, absolute maximum rating |
| Storage Temperature | -40 to +90 °C, absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 112 min, 225 max mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | 120 deg typ, 2θ1/2, Ta=25°C |
| Peak Wavelength | 518 nm typ at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 520 min, 535 max nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 35 nm typ at IF=20 mA, Ta=25°C |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V at IF=20 mA, Ta=25°C |
| Reverse Current | 50 µA max at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% measurement tolerance |
| Dominant Wavelength Tolerance | ±1 nm measurement tolerance |
| Forward Voltage Tolerance | ±0.05 V measurement tolerance |
| Luminous Intensity Bin R1 | 112 to 140 mcd at IF=20 mA |
| Luminous Intensity Bin R2 | 140 to 180 mcd at IF=20 mA |
| Luminous Intensity Bin S1 | 180 to 225 mcd at IF=20 mA |
| Dominant Wavelength Bin X | 520 to 525 nm at IF=20 mA |
| Dominant Wavelength Bin Y | 525 to 530 nm at IF=20 mA |
| Dominant Wavelength Bin Z | 530 to 535 nm at IF=20 mA |
| Carrier Tape Loaded Quantity | 3000 pcs per reel, 8 mm tape on 7 inch diameter reel |
| Reflow Cycles | Maximum 2 times |
| Opened Package Floor Life | 1 year at 30°C or less and 60% RH or less |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or LEDs exceeded storage time |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 16-213UYC_S530-A3_TR8 is an SMD brilliant green LED built with InGaN chip material and a water clear resin. The package is identified as the 16-213 SMD package, with mechanical dimensions defined in the drawing in millimeters and general tolerances of ±0.1 mm unless otherwise noted.
At IF=20 mA and Ta=25°C, the device provides 112 to 225 mcd luminous intensity, a 518 nm typical peak wavelength, and a dominant wavelength range from 520 to 535 nm. The typical spectrum radiation bandwidth is 35 nm, and the typical viewing angle is 120°.
Electrical limits include 25 mA forward current, 100 mA peak forward current under duty 1/10 at 1 kHz, 5 V reverse voltage, 110 mW power dissipation, and 50 µA maximum reverse current at VR=5 V. Assembly guidance includes 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and a maximum of two reflow cycles.
Key Features
- Brilliant green emitted color from InGaN chip material
- Water clear resin in 16-213 SMD package
- 112 to 225 mcd luminous intensity at 20 mA
- 520 to 535 nm dominant wavelength range
- 518 nm typical peak wavelength at 20 mA
- 120 degree typical viewing angle
- 2.7 to 3.7 V forward voltage range
- 25 mA forward current absolute maximum rating
- 100 mA peak forward current at pulsed duty
- 260°C reflow soldering for 10 seconds maximum
Typical Applications
- Status indicator LEDs
- Compact panel indicators
- Green signal points
- PCB-mounted visual indication
- Equipment front-panel lighting
- Compact display indicators
Procurement Notes
When requesting a quote for 16-213UYC_S530-A3_TR8, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 16-213UYC_S530-A3_TR8 emit?
16-213UYC_S530-A3_TR8 is specified as a brilliant green SMD LED. The datasheet lists a 518 nm typical peak wavelength and a 520 to 535 nm dominant wavelength range at IF=20 mA and Ta=25°C.
What forward voltage range is specified for this LED?
The forward voltage is specified as 2.7 V minimum, 3.3 V typical, and 3.7 V maximum at IF=20 mA and Ta=25°C. The forward voltage measurement tolerance is ±0.05 V.
What soldering limits apply to this SMD LED?
The reflow soldering temperature rating is 260°C for 10 seconds, while hand soldering is rated at 350°C for 3 seconds. The datasheet also limits the reflow soldering process to a maximum of two cycles.
How is the luminous intensity binned for this part?
At IF=20 mA, luminous intensity bins are R1 from 112 to 140 mcd, R2 from 140 to 180 mcd, and S1 from 180 to 225 mcd. The luminous intensity measurement tolerance is ±11%.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 31, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.