Specifications
| Type | Description |
|---|---|
| Part Number | 17-21_BHC-AN1P2_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 17-21 SMD B; dimensions shown in drawing, unit mm, tolerance ±0.1 mm unless otherwise specified |
| Datasheet Part Number | 17-21/BHC-AP1Q2/3T |
| Chip Material | InGaN |
| Emitted Color | Blue |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 20 mA |
| Peak Forward Current | 40 mA |
| Power Dissipation | 75 mW |
| Electrostatic Discharge | 150 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 45.0 min, 112.0 max mcd |
| Viewing Angle | 140 typ deg |
| Peak Wavelength | 468 typ nm |
| Dominant Wavelength | 464.5 min, 476.5 max nm |
| Spectrum Radiation Bandwidth | 25 typ nm |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V |
| Reverse Current | 50 max μA |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.1 V |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd |
| Dominant Wavelength Bin A9 | 464.5 to 467.5 nm |
| Dominant Wavelength Bin A10 | 467.5 to 470.5 nm |
| Dominant Wavelength Bin A11 | 470.5 to 473.5 nm |
| Dominant Wavelength Bin A12 | 473.5 to 476.5 nm |
| Carrier Tape Loaded Quantity | 3000 pcs per reel |
| Packaging Format | 8 mm tape on 7 inch diameter reel |
| Post-Opening Storage | 30°C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Datasheet Status | request_only |
Product Overview
The 17-21_BHC-AN1P2_3T is listed for CMS use as an EVERLIGHT LED and corresponds to the manufacturer datasheet part number 17-21/BHC-AP1Q2/3T. The device is an SMD blue LED using InGaN chip material with water-clear resin. Its package is specified as 17-21 SMD B, with drawing dimensions in millimeters and a general tolerance of ±0.1 mm unless otherwise specified.
At IF=20 mA and Ta=25°C, the LED has a luminous intensity range of 45.0 to 112.0 mcd, a 468 nm typical peak wavelength, and a dominant wavelength range of 464.5 to 476.5 nm. The typical viewing angle is 140°, and the spectrum radiation bandwidth is 25 nm typical. Forward voltage is specified from 2.7 V minimum to 3.7 V maximum, with 3.3 V typical.
Assembly and handling data include 8 mm tape on a 7 inch reel, 3000 pieces per reel, 260°C reflow soldering for 10 seconds, and 350°C hand soldering for 3 seconds. After opening, storage is limited to 30°C or less and 60% RH or less, with a 168 hour floor life.
Key Features
- SMD blue LED with InGaN chip material
- Water-clear resin for blue emitted color
- 17-21 SMD B package with millimeter drawing dimensions
- 20 mA forward current rating at Ta=25°C
- 40 mA peak forward current, duty 1/10 at 1 kHz
- 45.0 to 112.0 mcd luminous intensity at IF=20 mA
- 468 nm typical peak wavelength at IF=20 mA
- 140 degree typical viewing angle at IF=20 mA
- 2.7 to 3.7 V forward voltage range
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
- 168 hour floor life after package opening
Typical Applications
- Blue status indicators
- SMD indicator lighting
- Panel indicator LEDs
- PCB-mounted blue indication
- Compact optical indication
- Tape-and-reel assembly lines
- Wide-angle blue indicators
Procurement Notes
When requesting a quote for 17-21_BHC-AN1P2_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What LED type is 17-21_BHC-AN1P2_3T?
17-21_BHC-AN1P2_3T is represented as an EVERLIGHT SMD blue LED. The extracted datasheet facts identify InGaN chip material, blue emitted color, water-clear resin, and a 17-21 SMD B package.
What are the main optical ratings at 20 mA?
At IF=20 mA and Ta=25°C, luminous intensity is 45.0 to 112.0 mcd, peak wavelength is 468 nm typical, dominant wavelength is 464.5 to 476.5 nm, and viewing angle is 140 degrees typical.
What soldering limits are listed for this LED?
The extracted datasheet facts list reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. These values are stated under absolute maximum rating or soldering temperature information.
How is the device packaged for assembly?
The packaging format is 8 mm tape on a 7 inch diameter reel. The carrier tape loaded quantity is 3000 pieces per reel, according to the extracted carrier tape and features information.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.