Specifications
| Type | Description |
|---|---|
| Part Number | 18-038BT_BDGAR6S1-S06_10T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD, package dimensions shown but numeric dimensions not text-extracted; tolerance unless mentioned ±0.1 mm |
| Device Technology - Red | AlGaInP; Brilliant Red chip material |
| Device Technology - Green | InGaN; Brilliant Green chip material |
| Device Technology - Blue | InGaN; Brilliant Blue chip material |
| Resin Color | Black Surface Diffused; device selection guide |
| Forward Current - Red | 10 mA; Ta=25°C, absolute maximum rating, R6 |
| Forward Current - Green | 10 mA; Ta=25°C, absolute maximum rating, GA |
| Forward Current - Blue | 10 mA; Ta=25°C, absolute maximum rating, BD |
| Peak Forward Current - Red | 20 mA; Duty 1/10 @ 1 kHz, R6 |
| Peak Forward Current - Green | 20 mA; Duty 1/10 @ 1 kHz, GA |
| Peak Forward Current - Blue | 20 mA; Duty 1/10 @ 1 kHz, BD |
| Power Dissipation - Red | 24 mW; Ta=25°C, R6 |
| Power Dissipation - Green | 34 mW; Ta=25°C, GA |
| Power Dissipation - Blue | 34 mW; Ta=25°C, BD |
| Junction Temperature | 100°C; absolute maximum rating |
| Operating Temperature | -40°C to +85°C; Topr |
| Storage Temperature | -40°C to +100°C; Tstg |
| Reflow Soldering Temperature | 260°C for 10 sec; Tsol |
| Hand Soldering Temperature | 350°C for 3 sec; Tsol |
| Luminous Intensity - Red | 10 min, 18 typ, 30 max mcd; IF=5 mA, Ta=25°C, R6, tolerance ±10% |
| Luminous Intensity - Green | 20 min, 35 typ, 50 max mcd; IF=2 mA, Ta=25°C, GA, tolerance ±10% |
| Luminous Intensity - Blue | 2.8 min, 5 typ, 10 max mcd; IF=2 mA, Ta=25°C, BD, tolerance ±10% |
| Viewing Angle | 120° typ; 2θ1/2, IF=5 mA, Ta=25°C |
| Dominant Wavelength - Red | 615 min, 630 max nm; IF=5 mA, Ta=25°C, R6, tolerance ±1 nm |
| Dominant Wavelength - Green | 520 min, 545 max nm; IF=2 mA, Ta=25°C, GA, tolerance ±1 nm |
| Dominant Wavelength - Blue | 460 min, 480 max nm; IF=2 mA, Ta=25°C, BD, tolerance ±1 nm |
| Forward Voltage - Red | 1.6 min, 1.9 typ, 2.4 max V; IF=5 mA, Ta=25°C, R6, tolerance ±0.1 V |
| Forward Voltage - Green | 2.2 min, 2.5 typ, 3.4 max V; IF=2 mA, Ta=25°C, GA, tolerance ±0.1 V |
| Forward Voltage - Blue | 2.2 min, 2.6 typ, 3.4 max V; IF=2 mA, Ta=25°C, BD, tolerance ±0.1 V |
| Reverse Current | 1 µA max; VR=10 V, Ta=25°C, electronic test only |
| Packing Quantity | 38000 pcs per reel minimum; carrier tape packing |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Floor Life After Opening | 168 hours; 30°C or less and 60% RH or less |
| Storage Before Opening | 30°C or less and 90% RH or less; moisture proof bag unopened |
| Baking Treatment | 60±5°C for 24 hours; if silica gel faded or storage time exceeded |
| Pre-Curing Condition | 60±5°C for 24 hours or 125±5°C for 3 hours; before using LEDs |
| Reflow Soldering Limit | Maximum two times; reflow soldering process |
| Datasheet Status | request_only |
Product Overview
The 18-038BT_BDGAR6S1-S06_10T is an EVERLIGHT full-color SMD LED with a black surface diffused resin. Its red emitter uses AlGaInP chip material, while the green and blue emitters use InGaN chip material, supporting RGB indication or color-mixing designs within an SMD assembly format.
Electrical ratings at Ta=25°C specify 10 mA forward current for red, green, and blue channels. Peak forward current is 20 mA per channel under duty 1/10 at 1 kHz. Power dissipation ratings are 24 mW for red and 34 mW for both green and blue, with a 100°C junction temperature limit.
Optical characteristics include 120° typical viewing angle. Luminous intensity is specified as 10 to 30 mcd for red at IF=5 mA, 20 to 50 mcd for green at IF=2 mA, and 2.8 to 10 mcd for blue at IF=2 mA. The part is supplied in carrier tape packaging, with 38000 pieces per reel minimum, using 8 mm tape on a 7 inch reel.
Key Features
- Full-color SMD LED with red, green, and blue chips
- Black surface diffused resin package
- AlGaInP brilliant red chip technology
- InGaN brilliant green and blue chip technology
- 10 mA forward current rating per color
- 20 mA peak current at duty 1/10, 1 kHz
- 120° typical viewing angle
- Reflow soldering rated to 260°C for 10 seconds
- Hand soldering rated to 350°C for 3 seconds
- 8 mm tape on 7 inch reel packaging
- 38000 pieces per reel minimum carrier tape quantity
- Maximum two reflow soldering cycles
Typical Applications
- RGB status indicators
- Full-color panel indicators
- Compact SMD display modules
- Color-mixing indicator circuits
- Backlighting with diffused surface output
- Reflow-assembled LED boards
- Tape-and-reel automated placement
Procurement Notes
When requesting a quote for 18-038BT_BDGAR6S1-S06_10T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What LED technologies are used in this full-color device?
The red channel uses AlGaInP chip material. The green and blue channels use InGaN chip material. These materials are listed for the brilliant red, brilliant green, and brilliant blue chips in the device selection guide.
What are the forward current ratings for each color?
At Ta=25°C, the absolute maximum forward current rating is 10 mA for the red, green, and blue channels. Peak forward current is 20 mA per channel when operated at duty 1/10 and 1 kHz.
What optical intensity ranges are specified for the RGB channels?
At Ta=25°C, red is specified at 10 to 30 mcd at IF=5 mA. Green is 20 to 50 mcd at IF=2 mA, and blue is 2.8 to 10 mcd at IF=2 mA, each with ±10% tolerance.
What soldering limits apply to this SMD LED?
The reflow soldering temperature is 260°C for 10 seconds, and the hand soldering temperature is 350°C for 3 seconds. The reflow soldering process is limited to a maximum of two times.
How should the LED be stored after opening?
After opening, floor life is 168 hours under conditions of 30°C or less and 60% relative humidity or less. Before opening, the moisture proof bag storage condition is 30°C or less and 90% relative humidity or less.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.