Specifications
| Type | Description |
|---|---|
| Part Number | 19-213_G6C-AN1P2B_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Series / Package Style | 19-213 SMD LED, type B |
| Package Case | SMD B; dimensions not text-readable in provided content; tolerances unless mentioned ±0.1 mm |
| Emitted Color | Brilliant Yellow |
| Chip Material | AlGaInP |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V max, Ta=25°C absolute maximum rating |
| Forward Current | 25 mA max, Ta=25°C absolute maximum rating |
| Peak Forward Current | 60 mA max, duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 60 mW max, Ta=25°C absolute maximum rating |
| Electrostatic Discharge | 2000 V, HBM, Ta=25°C absolute maximum rating |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 72.0 min, 180.0 max mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | 120 deg typ, 2θ1/2, Ta=25°C |
| Peak Wavelength | 591 nm typ at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 585.5 min, 591.5 max nm at IF=20 mA, Ta=25°C |
| Spectral Radiation Bandwidth | 15 nm typ at IF=20 mA, Ta=25°C |
| Forward Voltage | 1.70 min, 2.20 typ, 2.40 max V at IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Reverse Operation Limitation | Device is not designed for reverse operation; VR condition applies to IR test only |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd at IF=20 mA |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd at IF=20 mA |
| Luminous Intensity Bin R1 | 112.0 to 140.0 mcd at IF=20 mA |
| Luminous Intensity Bin R2 | 140.0 to 180.0 mcd at IF=20 mA |
| Dominant Wavelength Bin D3 | 585.5 to 588.5 nm at IF=20 mA |
| Dominant Wavelength Bin D4 | 588.5 to 591.5 nm at IF=20 mA |
| Tape / Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Opened Package Storage | 30°C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or storage time exceeded |
| Reflow Limit | Not more than two times |
| Soldering Iron Limit | Tip temperature less than 350°C for 3 seconds within once; soldering iron capacity less than 25 W |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 19-213_G6C-AN1P2B_3T is a 19-213 SMD LED, type B, configured as a brilliant yellow LED. The device selection data identifies an AlGaInP chip and water clear resin, with the package case noted as SMD B; dimensional values are not text-readable in the provided content, and tolerances are ±0.1 mm unless otherwise mentioned.
At IF=20 mA and Ta=25°C, luminous intensity is specified from 72.0 to 180.0 mcd. The optical profile includes a 120 degree typical viewing angle, 591 nm typical peak wavelength, 585.5 to 591.5 nm dominant wavelength, and 15 nm typical spectral radiation bandwidth. Dominant wavelength bins D3 and D4 span 585.5 to 588.5 nm and 588.5 to 591.5 nm, while luminous intensity bins Q1, Q2, R1, and R2 cover 72.0 to 180.0 mcd.
Electrical and assembly limits include 25 mA maximum forward current, 60 mA maximum peak forward current at duty 1/10 and 1 kHz, 60 mW maximum power dissipation, and 2000 V HBM electrostatic discharge rating. The LED is supplied on 8 mm tape with a 7 inch reel, loaded at 3000 pieces per reel, and the reflow process is limited to not more than two times.
Key Features
- Brilliant yellow emission from AlGaInP chip material
- Water clear resin in 19-213 SMD LED type B
- 72.0 to 180.0 mcd luminous intensity at 20 mA
- 120 degree typical viewing angle at Ta=25°C
- 591 nm typical peak wavelength at 20 mA
- 585.5 to 591.5 nm dominant wavelength range
- 1.70 to 2.40 V forward voltage at 20 mA
- 25 mA maximum forward current rating
- 2000 V HBM electrostatic discharge rating
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
- Reflow soldering limited to not more than two times
Typical Applications
- Brilliant yellow status indicators
- SMD panel indication
- Compact display indicators
- Color-coded equipment signals
- Yellow annunciator lamps
- PCB-mounted visual alerts
- Tape-and-reel assembly lines
Procurement Notes
When requesting a quote for 19-213_G6C-AN1P2B_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 19-213_G6C-AN1P2B_3T emit?
The device emits brilliant yellow light. The datasheet selection guide lists AlGaInP chip material with water clear resin, and the electrical-optical table specifies a 591 nm typical peak wavelength at IF=20 mA and Ta=25°C.
What luminous intensity range is specified for this LED?
At IF=20 mA and Ta=25°C, luminous intensity is specified from 72.0 mcd minimum to 180.0 mcd maximum. The datasheet also lists intensity bins Q1, Q2, R1, and R2 across that same range.
Can this LED be used in reverse operation?
No. The extracted datasheet note states that the device is not designed for reverse operation. The 5 V reverse voltage condition applies only to the reverse current test, where IR is specified as 10 µA maximum.
What packaging is used for production assembly?
The part is supplied as an SMD LED on 8 mm tape with a 7 inch diameter reel. The carrier tape section specifies a loaded quantity of 3000 pieces per reel.
What soldering limits apply to this part?
Reflow soldering is rated at 260°C for 10 seconds and limited to not more than two times. Hand soldering is rated at 350°C for 3 seconds, with the soldering iron capacity specified as less than 25 W.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.