Specifications
| Type | Description |
|---|---|
| Part Number | 19-213-R6C-A0R2S2B0E-3T-AM |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions shown in drawing, units mm, tolerance ±0.1 mm unless otherwise noted |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, absolute maximum rating, Ta=25°C |
| Forward Current | 25 mA, absolute maximum rating, Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 @ 1 kHz, Ta=25°C |
| Power Dissipation | 60 mW, absolute maximum rating, Ta=25°C |
| Electrostatic Discharge | 2000 V, HBM, Ta=25°C |
| Operating Temperature | -40 to +85°C |
| Storage Temperature | -40 to +90°C |
| Reflow Soldering Temperature | 260°C for 10 sec |
| Hand Soldering Temperature | 350°C for 3 sec |
| Luminous Intensity | 72.0 min, 180.0 max mcd, IF=20 mA, Ta=25°C |
| Viewing Angle | 120° typ, 2θ1/2, Ta=25°C |
| Peak Wavelength | 591 nm typ, IF=20 mA, Ta=25°C |
| Dominant Wavelength | 585.5 min, 591.5 max nm, IF=20 mA, Ta=25°C |
| Spectral Radiation Bandwidth | 15 nm typ, IF=20 mA, Ta=25°C |
| Forward Voltage | 1.70 min, 2.20 typ, 2.40 max V, IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max, VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Reverse Operation Limitation | Device is not designed for reverse operation; VR condition applies to IR test only |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd, IF=20 mA |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd, IF=20 mA |
| Luminous Intensity Bin R1 | 112.0 to 140.0 mcd, IF=20 mA |
| Luminous Intensity Bin R2 | 140.0 to 180.0 mcd, IF=20 mA |
| Dominant Wavelength Bin D3 | 585.5 to 588.5 nm, IF=20 mA |
| Dominant Wavelength Bin D4 | 588.5 to 591.5 nm, IF=20 mA |
| Loaded Quantity | 3000 pcs per reel |
| Tape and Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Moisture Storage After Opening | 30°C or less and 60%RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Pb-Free Reflow Time Above 255°C | 10 sec max |
| Pb-Free Reflow Time Above 217°C | 60 to 150 sec |
| Preheating Temperature Range | 150 to 200°C |
| Preheating Time | 60 to 120 sec |
| Maximum Reflow Cycles | 2 times |
| Soldering Iron Power | 25 W max |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 19-213-R6C-A0R2S2B0E-3T-AM is a brilliant yellow SMD LED built with an AlGaInP chip and water clear resin. It is supplied in an SMD B package, with package drawing dimensions specified in millimeters and a general tolerance of ±0.1 mm unless otherwise noted.
At IF=20 mA and Ta=25°C, the device is specified for 72.0 to 180.0 mcd luminous intensity, 591 nm typical peak wavelength, 585.5 to 591.5 nm dominant wavelength, and 15 nm typical spectral radiation bandwidth. The forward voltage range is 1.70 to 2.40 V, with 2.20 V typical, and reverse current is limited to 10 µA max at VR=5 V for test only.
Assembly data supports tape-and-reel handling with 3000 pieces per reel on 8 mm tape and a 7 inch reel. Reflow guidance includes a 260°C maximum Pb-free peak, 10 seconds maximum above 255°C, and no more than two reflow cycles. The part fits brilliant yellow visual indication, panel indicators, wide-angle indicator points, and reflow-mounted LED assemblies.
Key Features
- AlGaInP chip emits brilliant yellow light
- Water clear resin in SMD B package
- 72.0 to 180.0 mcd at 20 mA
- 120° typical viewing angle at Ta=25°C
- 585.5 to 591.5 nm dominant wavelength
- 1.70 to 2.40 V forward voltage
- Reverse operation is not a design use
- 3000 pieces per 7 inch reel
- 260°C maximum Pb-free reflow peak
- 168 hours floor life after opening
Typical Applications
- Brilliant yellow status indicators
- SMD board indicator points
- Wide-angle panel indicators
- Reflow-assembled LED boards
- Tape-and-reel automated placement
- Low-current visual signaling
Procurement Notes
When requesting a quote for 19-213-R6C-A0R2S2B0E-3T-AM, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 19-213-R6C-A0R2S2B0E-3T-AM emit?
The device emits brilliant yellow light. The datasheet selection guide lists an AlGaInP chip, brilliant yellow emitted color, and water clear resin for this EVERLIGHT SMD LED.
What luminous intensity range is specified at 20 mA?
At IF=20 mA and Ta=25°C, luminous intensity is specified from 72.0 mcd minimum to 180.0 mcd maximum. The datasheet also lists Q1, Q2, R1, and R2 intensity bins across that range.
Can this LED be used in reverse operation?
No. The datasheet states that the device is not designed for reverse operation. The 5 V reverse-voltage condition is used for the reverse-current test, where IR is specified as 10 µA maximum.
What soldering limits apply to this SMD LED?
The soldering ratings list 260°C for 10 seconds for reflow and 350°C for 3 seconds for hand soldering. The Pb-free reflow profile also specifies a 260°C maximum peak and a maximum of two reflow cycles.
How is 19-213-R6C-A0R2S2B0E-3T-AM packaged?
The part is supplied as 3000 pieces per reel. The package feature is 8 mm tape on a 7 inch diameter reel, supporting tape-and-reel handling for SMD assembly.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 31, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.