Specifications
| Type | Description |
|---|---|
| Part Number | 19-213_R6C-AP1Q2B_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; dimensions shown in package drawing, unit=mm, tolerance ±0.1 mm unless otherwise specified |
| Series / Datasheet Part Number | 19-213/Y2C-CQ1R2/3T |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 72.0 to 180.0 mcd |
| Viewing Angle | 120 deg |
| Peak Wavelength | 591 nm typ |
| Dominant Wavelength | 585.5 to 591.5 nm |
| Spectrum Radiation Bandwidth | 15 nm typ |
| Forward Voltage | 1.70 V min, 2.20 V typ, 2.40 V max |
| Reverse Current | 10 µA max |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Reverse Operation Limitation | Device is not designed for reverse operation |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd |
| Luminous Intensity Bin R1 | 112.0 to 140.0 mcd |
| Luminous Intensity Bin R2 | 140.0 to 180.0 mcd |
| Dominant Wavelength Bin D3 | 585.5 to 588.5 nm |
| Dominant Wavelength Bin D4 | 588.5 to 591.5 nm |
| Tape and Reel Package | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Post-Opening Storage Condition | 30°C or less and 60% RH or less |
| Post-Opening Floor Life | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 30 sec max |
| Preheating Temperature Range | 150 to 200°C |
| Preheating Time | 60 to 120 sec |
| Reflow Soldering Count | Not more than two times |
| Soldering Iron Power | 25 W max |
| Datasheet Status | request_only |
Product Overview
The 19-213_R6C-AP1Q2B_3T is an EVERLIGHT brilliant yellow SMD LED associated with datasheet part number 19-213/Y2C-CQ1R2/3T. It uses an AlGaInP chip and water clear resin, with the package identified as SMD B. Package drawing dimensions are specified in millimeters with ±0.1 mm tolerance unless otherwise specified.
Optical performance is defined at IF=20 mA and Ta=25°C. Luminous intensity is 72.0 to 180.0 mcd, with Q1, Q2, R1, and R2 intensity bins. The LED has a 120 degree viewing angle, 591 nm typical peak wavelength, 585.5 to 591.5 nm dominant wavelength, and 15 nm typical spectrum radiation bandwidth.
Electrical and thermal limits include 25 mA forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, 60 mW power dissipation, 5 V reverse voltage rating, and 2000 V HBM electrostatic discharge rating. The device is not designed for reverse operation; the VR condition applies to reverse current testing only.
Assembly handling includes 8 mm tape on 7 inch reel packaging with 3000 pcs per reel. Reflow is limited to 260°C max, with no more than two soldering cycles.
Key Features
- Brilliant yellow emission from AlGaInP chip material
- Water clear resin in SMD B package
- 72.0 to 180.0 mcd at IF=20 mA
- 585.5 to 591.5 nm dominant wavelength range
- 120 degree viewing angle at Ta=25°C
- 1.70 V to 2.40 V forward voltage range
- 25 mA forward current absolute maximum rating
- 60 mA peak forward current, duty 1/10 at 1 kHz
- 8 mm tape on 7 inch reel packaging
- 3000 pcs loaded quantity per reel
Typical Applications
- Brilliant yellow status indicators
- SMD circuit board indicators
- Panel indication LEDs
- Compact visual signal points
- Tape-and-reel SMT assembly
- Wide-angle indication layouts
Procurement Notes
When requesting a quote for 19-213_R6C-AP1Q2B_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 19-213_R6C-AP1Q2B_3T emit?
The extracted datasheet facts identify the device as a brilliant yellow SMD LED. The optical data lists a 591 nm typical peak wavelength and 585.5 to 591.5 nm dominant wavelength at IF=20 mA and Ta=25°C.
What package is used for this EVERLIGHT LED?
The package is listed as SMD B. The package drawing uses millimeter dimensions, with a stated tolerance of ±0.1 mm unless otherwise specified.
What current ratings apply to this LED?
The absolute maximum forward current is 25 mA at Ta=25°C. Peak forward current is 60 mA under the stated duty 1/10 at 1 kHz condition.
Is this device designed for reverse operation?
No. The datasheet note states that the device is not designed for reverse operation. The 5 V reverse voltage condition is applied to the reverse current test only.
What soldering limits are specified?
Reflow soldering is listed at 260°C for 10 seconds, with Pb-free peak temperature of 260°C max. The profile also specifies 10 seconds max above 255°C and no more than two reflow soldering cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.