Specifications
| Type | Description |
|---|---|
| Part Number | 19-213_S2C-AQ2R2B_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | LED |
| Package / Case | SMD B; package dimensions shown in datasheet but numeric dimensions not present in extracted text |
| Emitted Color | Brilliant Yellow; AlGaInP chip, water clear resin |
| Chip Material | AlGaInP; device selection guide |
| Resin Color | Water Clear; device selection guide |
| Reverse Voltage | 5 V; Ta=25°C absolute maximum rating |
| Forward Current | 25 mA; Ta=25°C absolute maximum rating |
| Peak Forward Current | 60 mA; duty 1/10 at 1 kHz, Ta=25°C absolute maximum rating |
| Power Dissipation | 60 mW; Ta=25°C absolute maximum rating |
| Electrostatic Discharge | 2000 V; HBM, Ta=25°C absolute maximum rating |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +90 °C; absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec; soldering temperature absolute maximum rating |
| Hand Soldering Temperature | 350 °C for 3 sec; soldering temperature absolute maximum rating |
| Luminous Intensity | 72.0 min, 180.0 max mcd; IF=20 mA, Ta=25°C |
| Viewing Angle | 120 deg typ; 2θ1/2, Ta=25°C |
| Peak Wavelength | 591 nm typ; IF=20 mA, Ta=25°C |
| Dominant Wavelength | 585.5 min, 591.5 max nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 15 nm typ; IF=20 mA, Ta=25°C |
| Forward Voltage | 1.70 min, 2.20 typ, 2.40 max V; IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max; VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11%; measurement tolerance |
| Dominant Wavelength Tolerance | ±1 nm; measurement tolerance |
| Reverse Operation Note | Device is not designed for reverse operation; VR condition applies to IR test only |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd; IF=20 mA |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd; IF=20 mA |
| Luminous Intensity Bin R1 | 112.0 to 140.0 mcd; IF=20 mA |
| Luminous Intensity Bin R2 | 140.0 to 180.0 mcd; IF=20 mA |
| Dominant Wavelength Bin D3 | 585.5 to 588.5 nm; IF=20 mA |
| Dominant Wavelength Bin D4 | 588.5 to 591.5 nm; IF=20 mA |
| Tape/Reel Package | 8 mm tape on 7 inch diameter reel; packaging feature |
| Loaded Quantity | 3000 pcs per reel; carrier tape packaging |
| Reflow Cycles | Not more than two times; soldering condition |
| Post-Opening Storage | 30°C or less and 60% RH or less; after opening moisture proof package |
| Floor Life After Opening | 168 hours / 7 days; after opening package |
| Baking Treatment | 60±5°C for 24 hours; if silica gel faded or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
The EVERLIGHT 19-213_S2C-AQ2R2B_3T is a brilliant yellow surface-mount LED using an AlGaInP chip with water clear resin. The extracted datasheet facts identify the device as an SMD B package; package dimensions are shown in the datasheet, but numeric dimensions were not present in the extracted text.
At IF=20 mA and Ta=25°C, optical characteristics include 72.0 to 180.0 mcd luminous intensity, 591 nm typical peak wavelength, 585.5 to 591.5 nm dominant wavelength, 15 nm typical spectrum radiation bandwidth, and a 120 degree typical viewing angle. The part is divided into luminous intensity bins Q1, Q2, R1, and R2, and dominant wavelength bins D3 and D4.
Electrical and assembly limits include 1.70 V minimum, 2.20 V typical, and 2.40 V maximum forward voltage at 20 mA, 10 µA maximum reverse current at VR=5 V, 25 mA forward current, and 60 mA peak forward current under duty 1/10 at 1 kHz. Reflow soldering is rated at 260°C for 10 seconds, with not more than two reflow cycles. Packaging is 8 mm tape on a 7 inch reel with 3000 pieces per reel.
Key Features
- Brilliant yellow emission from AlGaInP chip
- Water clear resin construction
- SMD B surface-mount LED package
- 72.0 to 180.0 mcd at 20 mA
- 120 degree typical viewing angle
- 591 nm typical peak wavelength
- 585.5 to 591.5 nm dominant wavelength
- 1.70 to 2.40 V forward voltage range
- 25 mA absolute maximum forward current
- 8 mm tape on 7 inch reel
- 3000 pieces loaded per reel
- Reflow soldering up to two cycles
Typical Applications
- Brilliant yellow status indication
- Surface-mount indicator assemblies
- Wide-angle panel indicators
- Color-binned LED designs
- Tape-and-reel SMT production
- Low-current visual signaling
- Yellow wavelength matching applications
Procurement Notes
When requesting a quote for 19-213_S2C-AQ2R2B_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 19-213_S2C-AQ2R2B_3T emit?
The part emits brilliant yellow light. The extracted datasheet facts identify an AlGaInP chip with water clear resin, with a 591 nm typical peak wavelength and a 585.5 to 591.5 nm dominant wavelength range at IF=20 mA.
What is the forward voltage rating at 20 mA?
At IF=20 mA and Ta=25°C, the forward voltage is specified as 1.70 V minimum, 2.20 V typical, and 2.40 V maximum. These values come from the electrical characteristics extracted from the manufacturer datasheet.
How is this LED packaged for assembly?
The device is supplied as an SMD B package in 8 mm tape on a 7 inch diameter reel. The carrier tape packaging quantity is 3000 pieces per reel, based on the extracted datasheet packaging facts.
Can the LED be used in reverse operation?
The extracted datasheet note states that the device is not designed for reverse operation. The VR=5 V condition is tied to reverse current testing only, where reverse current is specified as 10 µA maximum.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.