Specifications
| Type | Description |
|---|---|
| Part Number | 19-213_Y2C-AP1Q2B_3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | LED |
| Package / Case | 19-213 SMD-B; package dimensions shown in mm, tolerances ±0.1 mm unless mentioned |
| Series / Datasheet Part Number | 19-213/Y2C-CQ1R2/3T |
| Emitted Color | Brilliant Yellow |
| Chip Material | AlGaInP |
| Resin Color | Water Clear |
| LED Type | Mono-color type |
| Reverse Voltage | 5 V, absolute maximum rating at Ta=25°C |
| Forward Current | 25 mA, absolute maximum rating at Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 60 mW, absolute maximum rating at Ta=25°C |
| Electrostatic Discharge | 2000 V HBM, absolute maximum rating at Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec, absolute maximum soldering temperature |
| Hand Soldering Temperature | 350 °C for 3 sec, absolute maximum soldering temperature |
| Luminous Intensity | 72.0 min, 180.0 max mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | 120° typ, 2θ1/2, Ta=25°C |
| Peak Wavelength | 591 nm typ at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 585.5 min, 591.5 max nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 15 nm typ at IF=20 mA, Ta=25°C |
| Forward Voltage | 1.70 min, 2.20 typ, 2.40 max V at IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Reverse Operation Note | Device is not designed for reverse operation; VR condition applies to IR test only |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd at IF=20 mA |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd at IF=20 mA |
| Luminous Intensity Bin R1 | 112.0 to 140.0 mcd at IF=20 mA |
| Luminous Intensity Bin R2 | 140.0 to 180.0 mcd at IF=20 mA |
| Dominant Wavelength Bin D3 | 585.5 to 588.5 nm at IF=20 mA |
| Dominant Wavelength Bin D4 | 588.5 to 591.5 nm at IF=20 mA |
| Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Post-Opening Storage | 30°C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or storage time exceeded |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 30 sec max |
| Reflow Preheat Temperature Range | 150 to 200°C |
| Reflow Preheat Time | 60 to 120 sec |
| Maximum Reflow Cycles | 2 times |
| Hand Soldering Iron Power | 25 W max |
| Datasheet Status | request_only |
Product Overview
The 19-213_Y2C-AP1Q2B_3T is an EVERLIGHT brilliant yellow SMD LED associated with the manufacturer datasheet series 19-213/Y2C-CQ1R2/3T. The device is specified as a mono-color LED using AlGaInP chip material and water clear resin in a 19-213 SMD-B package, with package dimensions given in millimeters and ±0.1 mm tolerance unless otherwise stated.
At 20 mA and 25°C, the LED has a luminous intensity range of 72.0 to 180.0 mcd, a 591 nm typical peak wavelength, and a dominant wavelength range of 585.5 to 591.5 nm. The forward voltage is specified from 1.70 V minimum to 2.40 V maximum, with 2.20 V typical. Reverse current is limited to 10 µA maximum at 5 V, but the datasheet notes the device is not designed for reverse operation.
Assembly data includes 8 mm tape on a 7 inch reel with 3000 pieces per reel. Reflow soldering is specified up to 260°C for 10 seconds, with a maximum of two reflow cycles, while hand soldering is limited to 350°C for 3 seconds using a 25 W maximum soldering iron.
Key Features
- Brilliant yellow mono-color SMD LED
- AlGaInP chip with water clear resin
- 19-213 SMD-B package with millimeter dimensions
- 72.0 to 180.0 mcd at 20 mA
- 585.5 to 591.5 nm dominant wavelength
- 120° typical viewing angle at 25°C
- 1.70 to 2.40 V forward voltage range
- 25 mA absolute maximum forward current
- 8 mm tape on 7 inch reel
- 3000 pieces loaded per reel
Typical Applications
- Brilliant yellow status indicators
- SMD panel indication
- Color-coded signal displays
- Compact PCB indicator lighting
- Wide-angle visual indication
Procurement Notes
When requesting a quote for 19-213_Y2C-AP1Q2B_3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does the 19-213_Y2C-AP1Q2B_3T emit?
The datasheet identifies the device as a brilliant yellow SMD LED. Its optical data lists a 591 nm typical peak wavelength and a 585.5 to 591.5 nm dominant wavelength range at IF=20 mA and Ta=25°C.
What is the package for this EVERLIGHT LED?
The package is listed as 19-213 SMD-B. The datasheet notes that package dimensions are shown in millimeters, with tolerances of ±0.1 mm unless another tolerance is specifically mentioned.
What forward voltage is specified at 20 mA?
At IF=20 mA and Ta=25°C, the forward voltage is specified as 1.70 V minimum, 2.20 V typical, and 2.40 V maximum according to the electro-optical characteristics.
Can the device be used in reverse operation?
The datasheet states that the device is not designed for reverse operation. The 5 V reverse voltage condition is associated with the reverse current test, where reverse current is specified as 10 µA maximum.
What soldering limits apply to this SMD LED?
Reflow soldering is specified at 260°C for 10 seconds as an absolute maximum, with Pb-free reflow peak temperature of 260°C maximum and no more than two reflow cycles. Hand soldering is 350°C for 3 seconds with a 25 W maximum iron.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.