Specifications
| Type | Description |
|---|---|
| Part Number | 19-223_R6GHC-A03_2T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | LED |
| Package / Case | SMD B; dimensions shown in drawing, unit mm, tolerance ±0.1 mm unless otherwise specified |
| Datasheet Part Number | 19-223/G6S2C-A01/2T; document title/header; page 1 |
| Chip Code G6 Material | AlGaInP; device selection guide; page 2 |
| Chip Code G6 Emitted Color | Brilliant Yellow Green; device selection guide; page 2 |
| Chip Code S2 Material | AlGaInP; device selection guide; page 2 |
| Chip Code S2 Emitted Color | Brilliant Orange; device selection guide; page 2 |
| Resin Color | Water Clear; G6 and S2 device selection; page 2 |
| Reverse Voltage | 5 V; absolute maximum rating, Ta=25°C; page 2 |
| G6 Forward Current | 25 mA; absolute maximum rating, Ta=25°C; page 2 |
| S2 Forward Current | 25 mA; absolute maximum rating, Ta=25°C; page 2 |
| G6 Peak Forward Current | 60 mA; duty 1/10 at 1 kHz, Ta=25°C; page 2 |
| S2 Peak Forward Current | 60 mA; duty 1/10 at 1 kHz, Ta=25°C; page 2 |
| G6 Power Dissipation | 60 mW; absolute maximum rating, Ta=25°C; page 2 |
| S2 Power Dissipation | 60 mW; absolute maximum rating, Ta=25°C; page 2 |
| G6 Electrostatic Discharge | 2000 V; HBM, Ta=25°C; page 2 |
| S2 Electrostatic Discharge | 2000 V; HBM, Ta=25°C; page 2 |
| Operating Temperature | -40 to +85 °C; absolute maximum rating; page 2 |
| Storage Temperature | -40 to +90 °C; absolute maximum rating; page 2 |
| Reflow Soldering Temperature | 260 °C for 10 sec; absolute maximum soldering rating; page 2 |
| Hand Soldering Temperature | 350 °C for 3 sec; absolute maximum soldering rating; page 2 |
| G6 Luminous Intensity | 30.0 min, 60.0 max mcd; IF=20 mA, Ta=25°C; page 3 |
| S2 Luminous Intensity | 90.0 min, 180.0 max mcd; IF=20 mA, Ta=25°C; page 3 |
| Viewing Angle | 130 deg typ; 2θ1/2, Ta=25°C; page 3 |
| G6 Peak Wavelength | 575 nm typ; IF=20 mA, Ta=25°C; page 3 |
| S2 Peak Wavelength | 611 nm typ; IF=20 mA, Ta=25°C; page 3 |
| G6 Dominant Wavelength | 568.5 min, 574.5 max nm; IF=20 mA, Ta=25°C; page 3 |
| S2 Dominant Wavelength | 602.0 min, 608.0 max nm; IF=20 mA, Ta=25°C; page 3 |
| G6 Spectrum Radiation Bandwidth | 20 nm typ; IF=20 mA, Ta=25°C; page 3 |
| S2 Spectrum Radiation Bandwidth | 17 nm typ; IF=20 mA, Ta=25°C; page 3 |
| G6 Forward Voltage | 1.70 min, 2.00 typ, 2.40 max V; IF=20 mA, Ta=25°C; page 3 |
| S2 Forward Voltage | 1.70 min, 2.00 typ, 2.40 max V; IF=20 mA, Ta=25°C; page 3 |
| G6 Reverse Current | 10 µA max; VR=5 V, Ta=25°C; page 3 |
| S2 Reverse Current | 10 µA max; VR=5 V, Ta=25°C; page 3 |
| Luminous Intensity Tolerance | ±11%; Iv measurement tolerance; page 3 |
| Dominant Wavelength Tolerance | ±1 nm; λd measurement tolerance; page 3 |
| Forward Voltage Tolerance | ±0.1 V; VF measurement tolerance; page 3 |
| Reverse Operation Note | Device is not designed for reverse operation; VR condition applied to IR test only; page 3 |
| G6 Luminous Intensity Bin 1 | 30.0 min, 60.0 max mcd; IF=20 mA; page 4 |
| S2 Luminous Intensity Bin 1 | 90.0 min, 180.0 max mcd; IF=20 mA; page 4 |
| Packing Format | 8 mm tape on 7 inch diameter reel; feature list; page 1 |
| Loaded Quantity | 2000 PCS per reel; carrier tape dimensions section; page 9 |
| Opened Package Storage Condition | 30°C or less and 60% RH or less; after opening package; page 10 |
| Floor Life After Opening | 168 hours / 7 days; after opening package; page 10 |
| Baking Treatment | 60±5°C for 24 hours; if desiccant faded or storage time exceeded; page 10 |
| Pb-free Reflow Peak Temperature | 260°C max; Pb-free solder temperature profile; page 10 |
| Time Above 255°C | 10 sec max; Pb-free solder temperature profile; page 10 |
| Time Above 217°C | 30 sec max; Pb-free solder temperature profile; page 10 |
| Preheating Temperature | 150 to 200°C; Pb-free solder temperature profile; page 10 |
| Preheating Time | 60 to 120 sec; Pb-free solder temperature profile; page 10 |
| Reflow Count Limit | No more than two times; reflow soldering process; page 10 |
| Soldering Iron Limit | Less than 350°C for 3 seconds, once per terminal, soldering iron capacity less than 25 W; hand soldering; page 10 |
| Compliance | RoHS compliant version; feature list states product remains within RoHS compliant version; page 1 |
| Compliance | EU REACH compliant; feature list; page 1 |
| Halogen Free Limit | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm; feature list; page 1 |
| Datasheet Source | Manufacturer technical datasheet |
| Datasheet Status | request_only |
Product Overview
19-223_R6GHC-A03_2T is listed as an EVERLIGHT LED product, with the manufacturer datasheet header showing 19-223/G6S2C-A01/2T. It is a multi-color SMD LED using AlGaInP chip materials for both color channels: G6 for Brilliant Yellow Green and S2 for Brilliant Orange. The resin color is water clear.
The package is SMD B, with mechanical dimensions provided in the drawing in millimeters and a stated ±0.1 mm tolerance unless otherwise specified. Optical ratings at IF=20 mA and Ta=25°C include 30.0 to 60.0 mcd luminous intensity for G6 and 90.0 to 180.0 mcd for S2. Typical peak wavelengths are 575 nm for G6 and 611 nm for S2, with a typical viewing angle of 130°.
Assembly data includes 8 mm tape on a 7 inch reel with 2000 pieces per reel. Pb-free reflow guidance lists a 260°C maximum peak, 10 seconds maximum above 255°C, 30 seconds maximum above 217°C, and no more than two reflow cycles. The device is suited to board-mounted multi-color indication, color-coded status signaling, and compact SMD indicator positions.
Key Features
- Multi-color SMD LED with G6 and S2 chip codes
- AlGaInP Brilliant Yellow Green and Brilliant Orange emitters
- Water clear resin for both device selections
- SMD B package with millimeter drawing dimensions
- Typical viewing angle is 130 degrees at Ta=25°C
- 25 mA forward current absolute maximum per channel
- 60 mA peak forward current at duty 1/10, 1 kHz
- Forward voltage is 2.00 V typical at 20 mA
- 8 mm tape on 7 inch reel packing
- Loaded quantity is 2000 pieces per reel
- Pb-free reflow peak temperature is 260°C maximum
- RoHS, EU REACH, and halogen-free limits stated
Typical Applications
- Board-mounted status indication
- Dual-color indicator lamps
- Color-coded equipment signals
- Compact SMD display indicators
- Brilliant yellow green channel indication
- Brilliant orange channel indication
- Reflow-assembled LED circuit boards
Procurement Notes
When requesting a quote for 19-223_R6GHC-A03_2T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What LED colors does 19-223_R6GHC-A03_2T provide?
The datasheet selection guide identifies two AlGaInP chip codes: G6 emits Brilliant Yellow Green and S2 emits Brilliant Orange. The resin color for the G6 and S2 device selection is water clear.
What are the optical intensity ratings at 20 mA?
At IF=20 mA and Ta=25°C, G6 luminous intensity is specified from 30.0 to 60.0 mcd. Under the same condition, S2 luminous intensity is specified from 90.0 to 180.0 mcd.
What soldering limits are listed for this LED?
The extracted datasheet facts list 260°C for 10 seconds as an absolute maximum reflow soldering rating and 350°C for 3 seconds for hand soldering. The Pb-free profile lists 260°C maximum peak temperature.
Is this device intended for reverse operation?
No. The datasheet note states that the device is not designed for reverse operation. The listed VR condition applies to the reverse current test only, where reverse current is specified as 10 µA maximum at VR=5 V.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.