Specifications
| Type | Description |
|---|---|
| Part Number | 204-10SURC_S530-A3 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Component Type | LED |
| Package Case | LED lamp package; dimensions shown in package drawing, all dimensions in mm, tolerance ±0.25 mm unless specified |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Red |
| Resin Color | Water Clear |
| Continuous Forward Current | 25 mA, Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 at 1 kHz, Ta=25°C |
| Reverse Voltage | 5 V, Ta=25°C |
| Power Dissipation | 60 mW, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +100 °C |
| Soldering Temperature | 260 °C for 5 sec |
| Luminous Intensity | Min 320 mcd, Typ 500 mcd, IF=20 mA, Ta=25°C |
| Viewing Angle | Typ 25 deg, 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | Typ 632 nm, IF=20 mA, Ta=25°C |
| Dominant Wavelength | Typ 624 nm, IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | Typ 20 nm, IF=20 mA, Ta=25°C |
| Forward Voltage | Min 1.7 V, Typ 2.0 V, Max 2.4 V, IF=20 mA, Ta=25°C |
| Reverse Current | Max 10 μA, VR=5 V, Ta=25°C |
| Package Dimension Units | millimeters |
| Package Dimension Tolerance | ±0.25 mm unless specially declared |
| Flange Height Limit | Less than 1.5 mm (0.059 in) |
| Packing Quantity | 200 to 1000 pcs per bag, 4 bags per inner carton, 10 inner cartons per outside carton |
| Recommended Storage Condition | 30°C or less and 70% RH or less after shipment from Everlight |
| Storage Life Limit | 3 months; up to 1 year in sealed container with nitrogen atmosphere and moisture absorbent material |
| Hand Soldering Tip Temperature | 300°C max, 30 W max iron, soldering time 3 sec max |
| DIP Soldering Condition | Preheat 100°C max for 60 sec max; solder bath 260°C max for 5 sec max |
| Minimum Solder Joint Distance | 3 mm minimum from solder joint to epoxy bulb |
| Cleaning Solvent | Isopropyl alcohol, room temperature, no more than 1 minute |
| Datasheet Status | request_only |
Product Overview
The 204-10SURC_S530-A3 is an EVERLIGHT brilliant red LED lamp built with AlGaInP chip material and water-clear resin. Its optical data at IF=20 mA and Ta=25°C includes 320 mcd minimum and 500 mcd typical luminous intensity, a typical 25° viewing angle, 632 nm peak wavelength, 624 nm dominant wavelength, and 20 nm typical spectrum radiation bandwidth.
Electrical limits at Ta=25°C include 25 mA continuous forward current, 60 mA peak forward current under duty 1/10 at 1 kHz, 5 V reverse voltage, and 60 mW power dissipation. Forward voltage is specified at 1.7 V minimum, 2.0 V typical, and 2.4 V maximum at IF=20 mA, with reverse current limited to 10 μA maximum at VR=5 V.
The package drawing uses millimeter dimensions with ±0.25 mm tolerance unless otherwise declared, and the flange height is specified as less than 1.5 mm. Assembly guidance includes hand soldering at 300°C maximum for 3 seconds maximum using a 30 W maximum iron, DIP soldering with 100°C maximum preheat and 260°C maximum solder bath, and a minimum 3 mm distance from solder joint to epoxy bulb.
Key Features
- Brilliant red emission from AlGaInP chip material
- Water-clear resin LED lamp construction
- 320 mcd minimum luminous intensity at 20 mA
- 500 mcd typical luminous intensity at 20 mA
- 25 degree typical viewing angle at 20 mA
- 632 nm typical peak wavelength
- 624 nm typical dominant wavelength
- 1.7 V to 2.4 V forward voltage range
- 25 mA continuous forward current rating
- 260°C for 5 seconds soldering temperature rating
Typical Applications
- Red panel indicators
- Status indication lamps
- Control panel signals
- Instrument display indicators
- Alert and warning indicators
- Board-mounted visual indication
- Narrow-view red signal points
Procurement Notes
When requesting a quote for 204-10SURC_S530-A3, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color output does 204-10SURC_S530-A3 provide?
204-10SURC_S530-A3 is specified as a brilliant red LED lamp. The datasheet lists a typical peak wavelength of 632 nm and a typical dominant wavelength of 624 nm at IF=20 mA and Ta=25°C.
What forward voltage should be expected at 20 mA?
At IF=20 mA and Ta=25°C, the forward voltage is specified as 1.7 V minimum, 2.0 V typical, and 2.4 V maximum. Circuit design should use the datasheet limits rather than only the typical value.
What soldering limits apply to this LED lamp?
The absolute soldering temperature rating is 260°C for 5 seconds. Recommended hand soldering uses a 300°C maximum tip with a 30 W maximum iron for 3 seconds maximum, with at least 3 mm from solder joint to epoxy bulb.
How should 204-10SURC_S530-A3 be stored after shipment?
Recommended storage after shipment from Everlight is 30°C or less and 70% RH or less. The storage life limit is 3 months, or up to 1 year in a sealed container with nitrogen atmosphere and moisture absorbent material.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.