Specifications
| Type | Description |
|---|---|
| Part Number | 204-10SYGC_S530-E2-L |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package Case | Through-hole LED lamp; package dimensions shown in drawing, all dimensions in mm, tolerance ±0.25 mm unless specified, flange height <1.5 mm |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Water Clear |
| Continuous Forward Current | 25 mA, Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 @ 1 kHz, Ta=25°C |
| Reverse Voltage | 5 V, Ta=25°C |
| Power Dissipation | 60 mW, Ta=25°C |
| Operating Temperature | -40 to +85°C |
| Storage Temperature | -40 to +100°C |
| Soldering Temperature | 260°C for 5 sec |
| Luminous Intensity | Min 125 mcd, Typ 250 mcd, IF=20 mA, Ta=25°C |
| Viewing Angle | Typ 20 deg, 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | Typ 575 nm, IF=20 mA, Ta=25°C |
| Dominant Wavelength | Typ 573 nm, IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | Typ 20 nm, IF=20 mA, Ta=25°C |
| Forward Voltage | Min 1.7 V, Typ 2.0 V, Max 2.4 V, IF=20 mA, Ta=25°C |
| Reverse Current | Max 10 µA, VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Package Dimension Units | mm |
| Package Dimension Tolerance | ±0.25 mm unless specially declared |
| Flange Height | <1.5 mm (0.059 in) |
| Hand Soldering Tip Temperature | 300°C max with 30 W max soldering iron |
| Hand Soldering Time | 3 sec max |
| DIP Soldering Preheat Temperature | 100°C max for 60 sec max |
| DIP Soldering Bath Temperature and Time | 260°C max, 5 sec max |
| Solder Joint Distance | 3 mm min from solder joint to epoxy bulb |
| Packing Quantity | Min 200 to 1000 pcs per bag; 4 bags per inner carton; 10 inner cartons per outside carton |
| Storage Condition After Shipment | 30°C or less and 70% RH or less, storage life limit 3 months |
| Extended Storage Condition | Up to 1 year in sealed container with nitrogen atmosphere and moisture absorbent material |
| Cleaning Solvent | Isopropyl alcohol at room temperature, no more than 1 minute |
| RoHS Compliance | Product will remain within RoHS compliant version |
| REACH Compliance | Complies with EU REACH |
| Halogen Free Limits | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm |
| Datasheet Status | request_only |
Product Overview
The 204-10SYGC_S530-E2-L is an EVERLIGHT brilliant yellow green LED lamp built with AlGaInP chip material and a water clear resin body. It is categorized as an LED and uses a through-hole lamp package with dimensions specified in millimeters. Unless otherwise declared, package dimension tolerance is ±0.25 mm, and the flange height is specified below 1.5 mm.
Key Features
- Brilliant yellow green emission from AlGaInP chip material
- Water clear resin through-hole LED lamp package
- 125 mcd minimum, 250 mcd typical luminous intensity
- 20 degree typical viewing angle at 20 mA
- 575 nm typical peak wavelength, 573 nm dominant wavelength
- 1.7 V minimum to 2.4 V maximum forward voltage
- 25 mA continuous forward current rating at 25°C
- 5 V reverse voltage with 10 µA maximum reverse current
- Operating temperature range from -40 to +85°C
- RoHS compliant, REACH compliant, and halogen free limits stated
Typical Applications
- Through-hole panel indicators
- Brilliant yellow green status lamps
- PCB-mounted signal indicators
- Equipment front-panel indication
- Visual state indication circuits
- Low-current LED indicator designs
Procurement Notes
When requesting a quote for 204-10SYGC_S530-E2-L, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does 204-10SYGC_S530-E2-L emit?
The 204-10SYGC_S530-E2-L emits brilliant yellow green light. The datasheet lists a typical peak wavelength of 575 nm and a typical dominant wavelength of 573 nm at IF=20 mA and Ta=25°C.
What is the rated forward current for this LED?
The continuous forward current rating is 25 mA at Ta=25°C. The peak forward current rating is 60 mA under a duty 1/10 condition at 1 kHz and Ta=25°C.
What soldering limits apply to this through-hole LED?
For hand soldering, the datasheet specifies a 300°C maximum tip temperature with a 30 W maximum soldering iron and 3 seconds maximum time. DIP soldering allows 100°C maximum preheat for 60 seconds and 260°C maximum bath temperature for 5 seconds.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.