Specifications
| Type | Description |
|---|---|
| Part Number | 23-22BSURSYGC_S530-A2_TR8 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 23-22B SMD LED; package outline dimensions shown, numeric body dimensions not available in provided text; 8 mm tape on 7 inch reel |
| Emitted Color - R7 | Dark Red; chip type R7; source page 2 |
| Chip Material - R7 | AlGaInP; chip type R7; source page 2 |
| Resin Color - R7 | Water Clear; chip type R7; source page 2 |
| Emitted Color - G6 | Brilliant Yellow Green; chip type G6; source page 2 |
| Chip Material - G6 | AlGaInP; chip type G6; source page 2 |
| Resin Color - G6 | Water Clear; chip type G6; source page 2 |
| Reverse Voltage | 5 V; Ta=25°C absolute maximum rating; source page 2 |
| Forward Current - R7 | 25 mA; Ta=25°C absolute maximum rating; source page 2 |
| Forward Current - G6 | 25 mA; Ta=25°C absolute maximum rating; source page 2 |
| Peak Forward Current - R7 | 60 mA; duty 1/10 at 1 kHz, Ta=25°C; source page 2 |
| Peak Forward Current - G6 | 60 mA; duty 1/10 at 1 kHz, Ta=25°C; source page 2 |
| Power Dissipation - R7 | 60 mW; Ta=25°C absolute maximum rating; source page 2 |
| Power Dissipation - G6 | 60 mW; Ta=25°C absolute maximum rating; source page 2 |
| Operating Temperature | -40 to +85 °C; absolute maximum rating; source page 2 |
| Storage Temperature | -40 to +90 °C; absolute maximum rating; source page 2 |
| Electrostatic Discharge - R7 | 2000 V; HBM; source page 2 |
| Electrostatic Discharge - G6 | 2000 V; HBM; source page 2 |
| Reflow Soldering Temperature | 260 °C for 10 sec; absolute maximum soldering temperature; source page 2 |
| Hand Soldering Temperature | 350 °C for 3 sec; absolute maximum soldering temperature; source page 2 |
| Luminous Intensity - R7 | 18.0 min, 72.0 max mcd; IF=20 mA, Ta=25°C; source page 2 |
| Luminous Intensity - G6 | 14.5 min, 45.0 max mcd; IF=20 mA, Ta=25°C; source page 2 |
| Viewing Angle | 130 deg typ; 2θ1/2, Ta=25°C; source page 2 |
| Peak Wavelength - R7 | 639 nm typ; IF=20 mA, Ta=25°C; source page 2 |
| Peak Wavelength - G6 | 575 nm typ; IF=20 mA, Ta=25°C; source page 2 |
| Dominant Wavelength - R7 | 631 nm typ; IF=20 mA, Ta=25°C; source page 2 |
| Dominant Wavelength - G6 | 573 nm typ; IF=20 mA, Ta=25°C; source page 2 |
| Spectrum Radiation Bandwidth - R7 | 20 nm typ; IF=20 mA, Ta=25°C; source page 2 |
| Spectrum Radiation Bandwidth - G6 | 20 nm typ; IF=20 mA, Ta=25°C; source page 2 |
| Forward Voltage - R7 | 1.70 min, 2.00 typ, 2.40 max V; IF=20 mA, Ta=25°C; source page 2 |
| Forward Voltage - G6 | 1.70 min, 2.00 typ, 2.40 max V; IF=20 mA, Ta=25°C; source page 2 |
| Reverse Current - R7 | 10 µA max; VR=5 V, Ta=25°C; source page 2 |
| Reverse Current - G6 | 10 µA max; VR=5 V, Ta=25°C; source page 2 |
| Luminous Intensity Tolerance | ±11%; Iv measurement tolerance; source page 2 |
| R7 Luminous Intensity Bin 1 | 18.0 to 28.5 mcd; IF=20 mA; source page 3 |
| R7 Luminous Intensity Bin 2 | 28.5 to 45.0 mcd; IF=20 mA; source page 3 |
| R7 Luminous Intensity Bin 3 | 45.0 to 72.0 mcd; IF=20 mA; source page 3 |
| G6 Luminous Intensity Bin 1 | 14.5 to 18.0 mcd; IF=20 mA; source page 3 |
| G6 Luminous Intensity Bin 2 | 18.0 to 28.5 mcd; IF=20 mA; source page 3 |
| G6 Luminous Intensity Bin 3 | 28.5 to 45.0 mcd; IF=20 mA; source page 3 |
| Packing Format | 8 mm tape on 7 inch diameter reel; product feature; source page 1 |
| Loaded Quantity | 2000 pcs per reel; carrier tape dimensions section; source page 8 |
| Package Dimension Tolerance | ±0.1 mm unless mentioned; package outline dimensions, unit=mm; source page 6 |
| Carrier Tape Dimension Tolerance | ±0.1 mm unless mentioned; carrier tape dimensions, unit=mm; source page 8 |
| Moisture Storage Before Opening | 30°C or less and 90% RH or less; before opening moisture-proof bag; source page 9 |
| Floor Life After Opening | 1 year; 30°C or less and 60% RH or less; source page 9 |
| Baking Treatment | 60±5°C for 24 hours; if silica gel faded or storage time exceeded; source page 9 |
| Pb-free Reflow Peak Temperature | 260°C max; Pb-free solder temperature profile; source page 9 |
| Reflow Time Above 255°C | 10 sec max; Pb-free solder temperature profile; source page 9 |
| Reflow Time Above 217°C | 60 to 150 sec; Pb-free solder temperature profile; source page 9 |
| Preheating Temperature | 150 to 200°C; Pb-free solder temperature profile; source page 9 |
| Preheating Time | 60 to 120 sec; Pb-free solder temperature profile; source page 9 |
| Reflow Cycle Limit | Not more than 2 times; reflow soldering; source page 9 |
| Soldering Iron Power | 25 W max; hand soldering; source page 9 |
| Datasheet Status | request_only |
Product Overview
23-22BSURSYGC_S530-A2_TR8 is an EVERLIGHT dual-color SMD LED using two AlGaInP chip types: R7 for dark red emission and G6 for brilliant yellow green emission. Both chip types use water clear resin, supporting a two-color indicator function in one SMD LED component.
Electrical ratings at Ta=25°C include 5 V reverse voltage, 25 mA forward current per chip, 60 mA peak forward current per chip at duty 1/10 and 1 kHz, and 60 mW power dissipation per chip. The operating temperature range is -40 to +85 °C, with storage from -40 to +90 °C and 2000 V HBM electrostatic discharge rating for both chips.
Optical characteristics at IF=20 mA include 18.0 to 72.0 mcd luminous intensity for R7 and 14.5 to 45.0 mcd for G6, with a 130 degree typical viewing angle. Assembly data includes Pb-free reflow peak temperature of 260°C max, hand soldering at 350°C for 3 seconds, and no more than two reflow cycles.
Key Features
- Dual-color SMD LED with R7 and G6 chips
- R7 emits dark red from AlGaInP material
- G6 emits brilliant yellow green from AlGaInP material
- Water clear resin used for both chip types
- 130 degree typical viewing angle at Ta=25°C
- 25 mA forward current rating for each chip
- 5 V reverse voltage absolute maximum rating
- 2000 V HBM ESD rating for each chip
- 8 mm tape on 7 inch reel packaging
- Pb-free reflow peak temperature is 260°C max
Typical Applications
- Dual-color status indicators
- Red and green panel indicators
- SMD indicator assemblies
- Wide-angle signal indication
- Tape-and-reel LED assembly
- Reflow-soldered PCB indicators
Procurement Notes
When requesting a quote for 23-22BSURSYGC_S530-A2_TR8, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What colors does 23-22BSURSYGC_S530-A2_TR8 emit?
The device uses two chip types. R7 emits dark red with a 631 nm typical dominant wavelength, while G6 emits brilliant yellow green with a 573 nm typical dominant wavelength. Both chip types use AlGaInP material and water clear resin.
What are the main electrical ratings for each LED chip?
At Ta=25°C, each chip has a 25 mA forward current rating and 60 mW power dissipation rating. Peak forward current is 60 mA for each chip under duty 1/10 at 1 kHz, and reverse voltage is 5 V.
What soldering limits apply to this SMD LED?
The absolute maximum reflow soldering temperature is 260°C for 10 seconds, and hand soldering is limited to 350°C for 3 seconds. The Pb-free profile specifies 260°C max peak temperature and no more than two reflow cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 31, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.