Specifications
| Type | Description |
|---|---|
| Part Number | 23-23B_R6GHBHC-A01_2A(LT) |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 23-23B SMD; package dimensions shown in drawing, units mm, tolerance ±0.1 mm unless specified |
| Emitted Color - R6 | Brilliant Red |
| Chip Material - R6 | AlGaInP |
| Emitted Color - GH | Brilliant Green |
| Chip Material - GH | InGaN |
| Emitted Color - BH | Blue |
| Chip Material - BH | InGaN |
| Resin Color | Water Clear; R6/GH/BH device selection |
| Reverse Voltage | 5 V; Ta=25°C |
| Forward Current - R6 | 25 mA; Ta=25°C |
| Forward Current - GH | 20 mA; Ta=25°C |
| Forward Current - BH | 20 mA; Ta=25°C |
| Peak Forward Current - R6 | 60 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Peak Forward Current - GH | 75 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Peak Forward Current - BH | 75 mA; duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation - R6 | 60 mW; Ta=25°C |
| Power Dissipation - GH | 95 mW; Ta=25°C |
| Power Dissipation - BH | 95 mW; Ta=25°C |
| Electrostatic Discharge - R6 | 2000 V; HBM, Ta=25°C |
| Electrostatic Discharge - GH | 150 V; HBM, Ta=25°C |
| Electrostatic Discharge - BH | 150 V; HBM, Ta=25°C |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +90 °C; absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity - R6 | Min 72 mcd, Typ 100 mcd; IF=20 mA, Ta=25°C |
| Luminous Intensity - GH | Min 140 mcd, Typ 200 mcd; IF=20 mA, Ta=25°C |
| Luminous Intensity - BH | Min 45 mcd, Typ 65 mcd; IF=20 mA, Ta=25°C |
| Luminous Intensity Tolerance | ±11%; Iv measurement |
| Viewing Angle | Typ 130 deg; 2θ1/2, Ta=25°C |
| Peak Wavelength - R6 | Typ 632 nm; IF=20 mA, Ta=25°C |
| Peak Wavelength - GH | Typ 518 nm; IF=20 mA, Ta=25°C |
| Peak Wavelength - BH | Typ 468 nm; IF=20 mA, Ta=25°C |
| Dominant Wavelength - R6 | Typ 624 nm; IF=20 mA, Ta=25°C |
| Dominant Wavelength - GH | Typ 525 nm; IF=20 mA, Ta=25°C |
| Dominant Wavelength - BH | Typ 470 nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth - R6 | Typ 20 nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth - GH | Typ 35 nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth - BH | Typ 25 nm; IF=20 mA, Ta=25°C |
| Forward Voltage - R6 | Min 1.7 V, Typ 2.0 V, Max 2.4 V; IF=20 mA, Ta=25°C |
| Forward Voltage - GH | Min 2.7 V, Typ 3.3 V, Max 3.7 V; IF=20 mA, Ta=25°C |
| Forward Voltage - BH | Min 2.7 V, Typ 3.3 V, Max 3.7 V; IF=20 mA, Ta=25°C |
| Reverse Current - R6 | Max 10 µA; VR=5 V, Ta=25°C |
| Reverse Current - GH | Max 50 µA; VR=5 V, Ta=25°C |
| Reverse Current - BH | Max 50 µA; VR=5 V, Ta=25°C |
| Tape Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 2000 pcs per reel |
| Post-Opening Floor Life | 1 year; after opening package, 30°C or less and 60% RH or less |
| Pre-Opening Storage Condition | 30°C or less and 90% RH or less before opening moisture proof bag |
| Baking Treatment | 60±5°C for 24 hours if silica gel has faded or storage time exceeded |
| Reflow Cycles | Not more than two times |
| Hand Soldering Iron Power | Less than 25 W; tip temperature less than 350°C for 3 seconds within once per terminal |
| Datasheet Status | request_only |
Product Overview
The 23-23B_R6GHBHC-A01_2A(LT) is an EVERLIGHT multi-color SMD LED using separate R6, GH, and BH chip selections for Brilliant Red, Brilliant Green, and Blue output. The red chip is AlGaInP, while the green and blue chips use InGaN materials. The device has water-clear resin and a typical viewing angle of 130° measured as 2θ1/2.
Key Features
- Brilliant Red, Brilliant Green, and Blue SMD LED outputs
- AlGaInP red chip with InGaN green and blue chips
- Water-clear resin for R6/GH/BH device selection
- Typical 130 degree viewing angle at Ta=25°C
- R6 typical luminous intensity of 100 mcd at 20 mA
- GH typical luminous intensity of 200 mcd at 20 mA
- BH typical luminous intensity of 65 mcd at 20 mA
- Rated for 260°C reflow soldering for 10 seconds
- 8 mm tape on 7 inch reel packaging
- Loaded quantity of 2000 pieces per reel
Typical Applications
- RGB status indicators
- Compact panel indicators
- Color-coded equipment signals
- Reflow-assembled LED boards
- Multi-color user interfaces
- Portable device indicators
- Instrument display accents
Procurement Notes
When requesting a quote for 23-23B_R6GHBHC-A01_2A(LT), buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What colors does 23-23B_R6GHBHC-A01_2A(LT) emit?
The device combines Brilliant Red, Brilliant Green, and Blue LED chips. The R6 red chip uses AlGaInP material, while the GH green and BH blue chips use InGaN material.
What is the viewing angle of this EVERLIGHT LED?
The datasheet specifies a typical viewing angle of 130 degrees, measured as 2θ1/2 at Ta=25°C. This applies to the multi-color SMD LED optical characteristics.
What soldering limits apply to this SMD LED?
The reflow soldering temperature rating is 260°C for 10 seconds, with not more than two reflow cycles. Hand soldering is rated at 350°C for 3 seconds, using an iron below 25 W.
How is this EVERLIGHT LED packaged for assembly?
The part is supplied as 8 mm tape on a 7 inch diameter reel. The carrier tape loaded quantity is specified as 2000 pieces per reel.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.