Specifications
| Type | Description |
|---|---|
| Part Number | 313-2SYGD_S530-E2 |
| Datasheet Part Marking | 313-2SYGD_S530-E2 / 1313-2SYGD/S530-E2 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Component Type | LED |
| Package / Case | Through-hole LED lamp; package dimensions shown in drawing, all dimensions in mm, tolerance ±0.25 mm unless otherwise specified |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Green Diffused |
| Continuous Forward Current | 25 mA at Ta=25°C absolute maximum rating |
| Peak Forward Current | 60 mA, duty 1/10 at 1 kHz, Ta=25°C absolute maximum rating |
| Reverse Voltage | 5 V at Ta=25°C absolute maximum rating |
| Power Dissipation | 60 mW at Ta=25°C absolute maximum rating |
| Operating Temperature | -40 to +85 °C absolute maximum rating |
| Storage Temperature | -40 to +100 °C absolute maximum rating |
| Soldering Temperature | 260 °C for 5 sec absolute maximum rating |
| Luminous Intensity | 63 min, 125 typ mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | 40 typ deg, 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | 575 typ nm at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 573 typ nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 20 typ nm at IF=20 mA, Ta=25°C |
| Forward Voltage | 1.7 min, 2.0 typ, 2.4 max V at IF=20 mA, Ta=25°C |
| Reverse Current | 10 max µA at VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Lead Forming Distance | At least 3 mm from base of epoxy bulb during lead formation |
| Hand Soldering Tip Temperature | 300 °C max, 30 W max recommended condition |
| Hand Soldering Time | 3 sec max recommended condition |
| DIP Soldering Preheat Temperature | 100 °C max for 60 sec max recommended condition |
| DIP Soldering Bath Temperature and Time | 260 °C max, 5 sec max recommended condition |
| Solder Joint Distance | 3 mm min from solder joint to epoxy bulb |
| Storage Condition After Shipment | 30°C or less and 70% RH or less for 3 months |
| Extended Storage Condition | Up to 1 year in sealed container with nitrogen atmosphere and moisture absorbent material |
| Cleaning Solvent | Isopropyl alcohol at room temperature, no more than 1 minute |
| Packing Quantity | 200 to 500 pcs per bag; 5 bags per inner carton; 10 inner cartons per outside carton |
| RoHS Compliance | Product will remain within RoHS compliant version |
| REACH Compliance | Compliant with EU REACH |
| Halogen Free Limit | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm |
| Availability Format | Available on tape and reel |
| Datasheet Status | request_only |
Product Overview
The 313-2SYGD_S530-E2 is an EVERLIGHT brilliant yellow-green LED lamp using an AlGaInP chip structure and green diffused resin. It is identified in the datasheet as 313-2SYGD_S530-E2 / 1313-2SYGD/S530-E2 and belongs to the LED category.
At IF=20 mA and Ta=25°C, the lamp provides 63 mcd minimum and 125 mcd typical luminous intensity, with a 40° typical viewing angle. Wavelength data includes 575 nm typical peak wavelength, 573 nm typical dominant wavelength, and 20 nm typical spectrum radiation bandwidth. Forward voltage is specified at 1.7 V minimum, 2.0 V typical, and 2.4 V maximum under the same test condition.
Assembly guidance includes lead forming at least 3 mm from the epoxy bulb, hand soldering at 300°C maximum for 3 seconds maximum, and DIP soldering at 260°C maximum for 5 seconds maximum after preheating. The device is documented as RoHS compliant, EU REACH compliant, halogen free within stated limits, and available on tape and reel.
Key Features
- AlGaInP chip material for brilliant yellow-green emission
- Green diffused resin through-hole LED lamp package
- 63 mcd minimum luminous intensity at 20 mA
- 125 mcd typical luminous intensity at 20 mA
- 40 degree typical viewing angle at 20 mA
- 575 nm typical peak wavelength
- 1.7 V to 2.4 V forward voltage range
- 25 mA continuous forward current rating
- 5 V reverse voltage absolute maximum rating
- RoHS and EU REACH compliant version
Typical Applications
- Through-hole visual indicators
- Yellow-green status lamps
- Panel indication circuits
- Signal indication assemblies
- DIP soldered LED boards
- Tape-and-reel LED assembly
Procurement Notes
When requesting a quote for 313-2SYGD_S530-E2, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does the 313-2SYGD_S530-E2 LED emit?
The EVERLIGHT 313-2SYGD_S530-E2 is specified as a brilliant yellow-green LED lamp. Its optical data lists a 575 nm typical peak wavelength and 573 nm typical dominant wavelength at IF=20 mA and Ta=25°C.
What forward voltage is specified for this EVERLIGHT LED?
At IF=20 mA and Ta=25°C, the forward voltage is specified as 1.7 V minimum, 2.0 V typical, and 2.4 V maximum. The datasheet note gives forward voltage measurement uncertainty as ±0.1 V.
What soldering limits apply to 313-2SYGD_S530-E2?
The absolute maximum soldering temperature is 260°C for 5 seconds. Recommended hand soldering is 300°C maximum, 30 W maximum, for 3 seconds maximum, with the solder joint at least 3 mm from the epoxy bulb.
How should this LED be stored after shipment?
The datasheet specifies storage after shipment at 30°C or less and 70% RH or less for 3 months. For storage of 3 months or more, it allows up to 1 year in a sealed container with nitrogen and moisture absorbent material.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.