Specifications
| Type | Description |
|---|---|
| Part Number | 333-2SDRD_S530-A3 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | LED lamp package; dimensions shown in mm, tolerance ±0.25 mm unless otherwise specified; flange height <1.5 mm |
| Chip Material | AlGaInP |
| Emitted Color | Deep-Red |
| Resin Color | Red Diffused |
| Continuous Forward Current | 25 mA, Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 @ 1 kHz, Ta=25°C |
| Reverse Voltage | 5 V, Ta=25°C |
| Power Dissipation | 60 mW, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +100 °C |
| Soldering Temperature | 260 °C for 5 sec |
| Luminous Intensity | Min 100 mcd, Typ 160 mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | Typ 30 deg, 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | Typ 650 nm at IF=20 mA, Ta=25°C |
| Dominant Wavelength | Typ 639 nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | Typ 20 nm at IF=20 mA, Ta=25°C |
| Forward Voltage | Typ 2.0 V, Max 2.4 V at IF=20 mA, Ta=25°C |
| Reverse Current | Max 10 μA at VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Package Dimension Tolerance | ±0.25 mm unless specially declared |
| Flange Height Limit | <1.5 mm (0.059 in) |
| Hand Soldering Tip Temperature | 300 °C max, 30 W max, 3 sec max |
| DIP Soldering Preheat Temperature | 100 °C max, 60 sec max |
| DIP Soldering Bath Temperature and Time | 260 °C max, 5 sec max |
| Minimum Solder Joint Distance | 3 mm min from solder joint to epoxy bulb |
| Datasheet Status | request_only |
Product Overview
333-2SDRD_S530-A3 is an EVERLIGHT deep-red diffused LED lamp built with AlGaInP chip material. The device selection data identifies the emitted color as Deep-Red and the resin color as Red Diffused, making it suited to visible red indication where a diffused lamp appearance is required.
At IF=20 mA and Ta=25°C, the LED is specified for 100 mcd minimum and 160 mcd typical luminous intensity, with a typical 30° viewing angle. Optical parameters include a typical 650 nm peak wavelength, 639 nm dominant wavelength, and 20 nm typical spectrum radiation bandwidth.
Electrical ratings include 25 mA continuous forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, 5 V reverse voltage, 60 mW power dissipation, and 10 μA maximum reverse current at VR=5 V. Assembly guidance includes 260°C for 5 seconds soldering, hand soldering at 300°C maximum for 3 seconds, and a 3 mm minimum distance from solder joint to epoxy bulb.
Key Features
- AlGaInP chip material for deep-red emission
- Deep-Red emitted color with red diffused resin
- 100 mcd minimum luminous intensity at 20 mA
- 160 mcd typical luminous intensity at 20 mA
- Typical 30 degree viewing angle at 20 mA
- 650 nm typical peak wavelength at 20 mA
- 639 nm typical dominant wavelength at 20 mA
- 2.0 V typical forward voltage at 20 mA
- 25 mA continuous forward current rating
- 260 °C soldering temperature for 5 seconds
Typical Applications
- Deep-red status indicators
- Panel indicator lamps
- Signal indication circuits
- Equipment front-panel LEDs
- Diffused red visual alerts
- Current-limited LED displays
Procurement Notes
When requesting a quote for 333-2SDRD_S530-A3, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does the 333-2SDRD_S530-A3 emit?
The 333-2SDRD_S530-A3 emits Deep-Red light. The datasheet selection guide lists AlGaInP chip material, Deep-Red emitted color, and Red Diffused resin color.
What current rating applies to this EVERLIGHT LED lamp?
At Ta=25°C, the continuous forward current rating is 25 mA. The peak forward current rating is 60 mA under duty 1/10 at 1 kHz.
What soldering limits are specified for assembly?
The absolute soldering temperature is 260°C for 5 seconds. Hand soldering is limited to a 300°C maximum tip temperature, 30 W maximum iron power, and 3 seconds maximum time.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.