Specifications
| Type | Description |
|---|---|
| Part Number | 333-2SUGC_S400-A5 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Datasheet Part Number | 333-2SUGC/S400-A5 |
| Device Type | LAMP LED |
| Chip Material | InGaN |
| Emitted Color | Brilliant Green |
| Resin Color | Water Clear |
| Continuous Forward Current | 25 mA, Ta=25°C absolute maximum rating |
| Electrostatic Discharge | 150 V, Ta=25°C absolute maximum rating |
| Reverse Voltage | 5 V, Ta=25°C absolute maximum rating |
| Power Dissipation | 110 mW, Ta=25°C absolute maximum rating |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +100 °C |
| Soldering Temperature | 260 °C for 5 sec |
| Luminous Intensity | min 4000 mcd, typ 8000 mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | typ 10 deg, 2θ1/2 at IF=20 mA, Ta=25°C |
| Peak Wavelength | typ 525 nm at IF=20 mA, Ta=25°C |
| Dominant Wavelength | typ 530 nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | typ 35 nm at IF=20 mA, Ta=25°C |
| Forward Voltage | typ 3.4 V, max 4.0 V at IF=20 mA, Ta=25°C |
| Reverse Current | max 50 μA at VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Package Dimension Units | millimeters |
| Package Dimension Tolerance | ±0.25 mm without special declaration |
| Flange Height | <1.5 mm / <0.059 in |
| Packing Quantity | min 200 to 500 pcs per bag |
| Inner Carton Quantity | 4 bags per inner carton |
| Outside Carton Quantity | 10 inner cartons per outside carton |
| Hand Soldering Tip Temperature | 300 °C max with 30 W max iron |
| Hand Soldering Time | 3 sec max |
| Solder Joint Distance | 3 mm min from solder joint to epoxy bulb |
| DIP Soldering Preheat Temperature | 100 °C max for 60 sec max |
| DIP Soldering Bath Temperature and Time | 260 °C max, 5 sec max |
| Cleaning Solvent | isopropyl alcohol at room temperature for no more than 1 minute |
| Storage Conditions | 30 °C or less and 70% RH or less after shipment from Everlight |
| Storage Life | 3 months at specified storage conditions after shipment |
| Datasheet Source | Manufacturer technical datasheet |
| Datasheet Status | request_only |
Product Overview
The 333-2SUGC_S400-A5 is an EVERLIGHT lamp LED identified in the datasheet as 333-2SUGC/S400-A5. It is a brilliant green LED lamp using InGaN chip material and a water clear resin package, supporting optical output centered around a 525 nm typical peak wavelength and 530 nm typical dominant wavelength at IF=20 mA and Ta=25°C.
Electrical limits include 25 mA continuous forward current, 110 mW power dissipation, 5 V reverse voltage, and a forward voltage of 3.4 V typical and 4.0 V maximum at 20 mA. Optical characteristics include 4000 mcd minimum and 8000 mcd typical luminous intensity, 35 nm typical spectrum radiation bandwidth, and a 10 degree typical viewing angle.
The package dimensions are specified in millimeters with ±0.25 mm tolerance where otherwise undeclared, and the flange height is below 1.5 mm. Assembly guidance includes hand soldering at 300°C maximum for 3 seconds maximum, DIP soldering at 260°C maximum for 5 seconds maximum, and a minimum 3 mm solder joint distance from the epoxy bulb.
Key Features
- Brilliant green emitted color from InGaN chip material
- Water clear resin LED lamp package
- 4000 mcd minimum luminous intensity at 20 mA
- 8000 mcd typical luminous intensity at 20 mA
- 10 degree typical viewing angle at 20 mA
- 525 nm typical peak wavelength
- 530 nm typical dominant wavelength
- 3.4 V typical forward voltage at 20 mA
- 25 mA continuous forward current rating
- -40 to +85 °C operating temperature range
Typical Applications
- Brilliant green status indicators
- Narrow-angle panel indicators
- Signal lamp assemblies
- Equipment front-panel illumination
- PCB-mounted LED indication
- Color-coded visual alerts
Procurement Notes
When requesting a quote for 333-2SUGC_S400-A5, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color output does 333-2SUGC_S400-A5 provide?
The datasheet identifies the device as a brilliant green LED lamp. It uses InGaN chip material with water clear resin, with typical peak wavelength of 525 nm and typical dominant wavelength of 530 nm at 20 mA.
What are the main electrical ratings for this LED?
At Ta=25°C, the absolute maximum ratings include 25 mA continuous forward current, 110 mW power dissipation, 5 V reverse voltage, and 150 V electrostatic discharge rating. Forward voltage is 3.4 V typical and 4.0 V maximum at 20 mA.
What soldering conditions are specified for this part?
Hand soldering is specified with a 300°C maximum tip temperature, 30 W maximum iron, and 3 seconds maximum time. DIP soldering allows 100°C maximum preheat for up to 60 seconds and 260°C maximum bath temperature for up to 5 seconds.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.