Specifications
| Type | Description |
|---|---|
| Part Number | 333-2SUGC_S400-A5-L |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Series / Datasheet Part Number | 333-2SUGC/S400-A5 |
| Chip Material | InGaN |
| Emitted Color | Brilliant Green |
| Resin Color | Water Clear |
| Package / Case | Through-hole LED lamp; package dimension drawing provided, exact dimensions not legible in supplied text; flange height <1.5 mm, general tolerance ±0.25 mm |
| Continuous Forward Current | 25 mA; Ta=25°C absolute maximum rating |
| Electrostatic Discharge Rating | 150 V; Ta=25°C absolute maximum rating |
| Reverse Voltage | 5 V; Ta=25°C absolute maximum rating |
| Power Dissipation | 110 mW; Ta=25°C absolute maximum rating |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +100 °C; absolute maximum rating |
| Soldering Temperature | 260 °C for 5 sec; absolute maximum rating |
| Luminous Intensity | min 4000 mcd, typ 8000 mcd; IF=20 mA, Ta=25°C |
| Viewing Angle | typ 10 deg; 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | typ 525 nm; IF=20 mA, Ta=25°C |
| Dominant Wavelength | typ 530 nm; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | typ 35 nm; IF=20 mA, Ta=25°C |
| Forward Voltage | typ 3.4 V, max 4.0 V; IF=20 mA, Ta=25°C |
| Reverse Current | max 50 µA; VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Package Dimension Units | All dimensions in millimeters |
| Flange Height Limit | <1.5 mm (0.059 in) |
| Package Dimension Tolerance | ±0.25 mm unless specially declared |
| Packing Quantity | MIN 200 to 500 pcs per bag; 4 bags per inner carton; 10 inner cartons per outside carton |
| Hand Soldering Iron Tip Temperature | 300 °C max; 30 W max soldering recommendation |
| Hand Soldering Time | 3 sec max; recommended soldering conditions |
| Solder Joint Distance From Epoxy Bulb | 3 mm min; hand soldering and DIP soldering recommendation |
| DIP Soldering Preheat Temperature | 100 °C max; 60 sec max recommended soldering conditions |
| DIP Soldering Bath Temperature and Time | 260 °C max, 5 sec max; recommended soldering conditions |
| Storage Condition After Shipment | ≤30 °C and ≤70% RH; storage life limit 3 months |
| Extended Storage Condition | Up to 1 year in sealed container with nitrogen atmosphere and moisture absorbent material |
| Cleaning Solvent | Isopropyl alcohol; room temperature, no more than 1 minute |
| Datasheet Status | request_only |
Product Overview
The EVERLIGHT 333-2SUGC_S400-A5-L is a brilliant green LED lamp, with the datasheet identification listed as 333-2SUGC/S400-A5. The device selection guide specifies an InGaN chip material and water-clear resin color, supporting a through-hole lamp format for board-mounted visual indication.
At IF=20 mA and Ta=25°C, the lamp is specified for 4000 mcd minimum and 8000 mcd typical luminous intensity. Optical characteristics include a 10° typical viewing angle, 525 nm typical peak wavelength, 530 nm typical dominant wavelength, and 35 nm typical spectrum radiation bandwidth. Electrical characteristics at the same test condition include 3.4 V typical forward voltage and 4.0 V maximum forward voltage, with reverse current limited to 50 µA maximum at VR=5 V.
Assembly guidance includes hand soldering at 300°C maximum for 3 seconds maximum, with solder joints kept at least 3 mm from the epoxy bulb. DIP soldering is specified with 100°C maximum preheat for 60 seconds maximum and a 260°C maximum bath for 5 seconds maximum.
Key Features
- Brilliant green emitted color with water-clear resin
- InGaN chip material specified in selection guide
- 4000 mcd minimum luminous intensity at 20 mA
- 8000 mcd typical luminous intensity at 20 mA
- 10 degree typical viewing angle
- 525 nm typical peak wavelength
- 530 nm typical dominant wavelength
- 3.4 V typical forward voltage at 20 mA
- 25 mA continuous forward current rating
- Through-hole lamp package with millimeter dimensions
Typical Applications
- Through-hole visual indicators
- Panel status lamps
- Brilliant green signal lights
- Narrow-angle indication points
- Board-mounted lamp assemblies
- Low-current indicator circuits
Procurement Notes
When requesting a quote for 333-2SUGC_S400-A5-L, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color output does 333-2SUGC_S400-A5-L provide?
The datasheet identifies this EVERLIGHT device as a brilliant green LED lamp. The selection guide lists brilliant green emitted color, water-clear resin, 525 nm typical peak wavelength, and 530 nm typical dominant wavelength.
What are the main electrical ratings for this LED?
At Ta=25°C, the absolute maximum ratings include 25 mA continuous forward current, 5 V reverse voltage, 110 mW power dissipation, and 150 V electrostatic discharge rating. Forward voltage is 3.4 V typical and 4.0 V maximum at IF=20 mA.
What soldering limits are specified for assembly?
Hand soldering is recommended at 300°C maximum tip temperature for 3 seconds maximum with a 30 W maximum iron. DIP soldering uses 100°C maximum preheat for 60 seconds maximum and a 260°C maximum bath for 5 seconds maximum.
What package information is available from the extracted datasheet text?
The part is described as a through-hole LED lamp. The package drawing is provided, but exact dimensions are not legible in the supplied text. Package notes state all dimensions are in millimeters, flange height is below 1.5 mm, and tolerance is ±0.25 mm unless declared.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.