Specifications
| Type | Description |
|---|---|
| Part Number | 333-2SURC_S530-A3 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | LED |
| Package / Case | Through-hole LED lamp; package dimensions shown on page 4 but numeric dimensions not extractable from provided text; tolerance ±0.25 mm unless otherwise specified; flange height <1.5 mm |
| Datasheet Part Number | 333-2SURC/S400-A8; shown in datasheet header and differs from requested part number 333-2SURC_S530-A3 |
| Product Family | LAMP |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Red |
| Resin Color | Water Clear |
| Continuous Forward Current | 25 mA at Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 @ 1 kHz, Ta=25°C |
| Reverse Voltage | 5 V at Ta=25°C |
| Power Dissipation | 60 mW at Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +100 °C |
| Soldering Temperature | 260 °C for 5 sec |
| Luminous Intensity | Min 3200 mcd, Typ 5000 mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | Typ 10 deg, 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | Typ 632 nm at IF=20 mA, Ta=25°C |
| Dominant Wavelength | Typ 624 nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | Typ 20 nm at IF=20 mA, Ta=25°C |
| Forward Voltage | Min 1.7 V, Typ 2.0 V, Max 2.4 V at IF=20 mA, Ta=25°C |
| Reverse Current | Max 10 µA at VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Package Dimension Units | millimeters |
| Package Dimension Tolerance | ±0.25 mm unless specially declared |
| Flange Height Limit | <1.5 mm / <0.059 in |
| Packing Quantity | Min 200 to 500 pcs per bag |
| Inner Carton Packing | 5 bags per inner carton |
| Outside Carton Packing | 10 inner cartons per outside carton |
| Storage Condition After Shipment | ≤30°C and ≤70% RH; storage life limit 3 months after shipment |
| Extended Storage Condition | Up to 1 year in sealed container with nitrogen atmosphere and moisture absorbent material |
| Hand Soldering Tip Temperature | 300°C max with 30 W max iron |
| Hand Soldering Time | 3 sec max |
| DIP Soldering Preheat Temperature | 100°C max for 60 sec max |
| DIP Soldering Bath Temperature and Time | 260°C max, 5 sec max |
| Solder Joint Distance From Epoxy Bulb | 3 mm min |
| Cleaning Solvent | Isopropyl alcohol at room temperature, no more than 1 minute |
| RoHS Compliance | RoHS compliant version |
| REACH Compliance | Compliant with EU REACH |
| Halogen Free Limit | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm |
| Datasheet Status | request_only |
Product Overview
The device is characterized as a through-hole LED lamp. Package dimension units are millimeters, with ±0.25 mm tolerance unless specially declared, and the flange height is limited to less than 1.5 mm or 0.059 in. Numeric package dimensions were shown in the source drawing but were not extractable from the provided text.
At Ta=25°C, maximum ratings include 25 mA continuous forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, 5 V reverse voltage, and 60 mW power dissipation. Optical values at IF=20 mA include 3200 mcd minimum and 5000 mcd typical luminous intensity, 10° typical viewing angle, 632 nm peak wavelength, and 624 nm dominant wavelength.
Assembly guidance includes 260°C for 5 seconds soldering, 300°C maximum hand soldering tip temperature for 3 seconds maximum, and a 3 mm minimum solder joint distance from the epoxy bulb. Storage, packing, cleaning, RoHS, REACH, and halogen-free limits are documented in the extracted facts.
Key Features
- Brilliant red LED lamp product type
- AlGaInP chip material
- Water-clear resin color
- Through-hole LED lamp package
- 3200 mcd minimum luminous intensity at 20 mA
- 5000 mcd typical luminous intensity at 20 mA
- 10 degree typical viewing angle
- 632 nm typical peak wavelength
- 2.0 V typical forward voltage at 20 mA
- RoHS compliant and EU REACH compliant
- Halogen limits: Br <900 ppm, Cl <900 ppm
- Cleaning supported with isopropyl alcohol
Typical Applications
- Through-hole indicator lamps
- Brilliant red status indication
- Narrow-angle panel indicators
- Water-clear lens LED assemblies
- 20 mA LED drive circuits
- Red visual signal outputs
- DIP-soldered LED boards
- Hand-soldered LED assemblies
Procurement Notes
When requesting a quote for 333-2SURC_S530-A3, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color output does 333-2SURC_S530-A3 provide?
The extracted datasheet facts identify the device as a brilliant red LED lamp. The emitted color is Brilliant Red, with a typical peak wavelength of 632 nm and typical dominant wavelength of 624 nm at IF=20 mA and Ta=25°C.
What package information is available for this LED?
The package is described as a through-hole LED lamp. Package dimensions are in millimeters with ±0.25 mm tolerance unless specially declared. Numeric dimensions were shown on the package drawing but were not extractable from the provided text.
What current and voltage limits are listed?
At Ta=25°C, the absolute maximum ratings list 25 mA continuous forward current, 60 mA peak forward current at duty 1/10 and 1 kHz, 5 V reverse voltage, and 60 mW power dissipation.
What soldering conditions are specified for assembly?
The extracted facts list 260°C for 5 seconds as the soldering temperature rating. Hand soldering guidance gives a 300°C maximum tip temperature for 3 seconds maximum, with solder joints at least 3 mm from the epoxy bulb.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.