Specifications
| Type | Description |
|---|---|
| Part Number | 333-2SYGC_S530-E2 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Water Clear |
| Continuous Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Reverse Voltage | 5 V |
| Power Dissipation | 60 mW |
| Operating Temperature | -40 to +85°C |
| Storage Temperature | -40 to +100°C |
| Soldering Temperature | 260°C for 5 sec |
| Luminous Intensity | Min 400 mcd, Typ 800 mcd |
| Viewing Angle | Typ 10 deg |
| Peak Wavelength | Typ 575 nm |
| Dominant Wavelength | Typ 573 nm |
| Spectrum Radiation Bandwidth | Typ 20 nm |
| Forward Voltage | Typ 2.0 V, Max 2.4 V |
| Reverse Current | Max 10 µA |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Package Dimension Unit | All dimensions are in millimeters |
| Package Dimension Tolerance | ±0.25 mm |
| Flange Height | Less than 1.5 mm (0.059 in) |
| Hand Soldering Iron Tip Temperature | 300°C max |
| DIP Soldering Bath Temperature and Time | 260°C max, 5 sec max |
| Datasheet Status | request_only |
Product Overview
The EVERLIGHT 333-2SYGC_S530-E2 is a brilliant yellow green LED lamp based on AlGaInP chip material and supplied with water clear resin. Its optical characteristics at IF=20 mA and Ta=25°C include 400 mcd minimum and 800 mcd typical luminous intensity, a typical 10° viewing angle, 575 nm typical peak wavelength, and 573 nm typical dominant wavelength.
Electrical ratings at Ta=25°C include 25 mA continuous forward current, 60 mA peak forward current under duty 1/10 at 1 kHz, 5 V reverse voltage, and 60 mW power dissipation. Forward voltage is specified as 2.0 V typical and 2.4 V maximum at IF=20 mA, while reverse current is 10 µA maximum at VR=5 V.
The LED lamp package dimensions are provided in millimeters with ±0.25 mm tolerance unless otherwise specified, and the flange height is less than 1.5 mm. Soldering limits include 260°C for 5 seconds, with hand soldering iron tip temperature limited to 300°C maximum for 3 seconds maximum.
Key Features
- AlGaInP chip material for brilliant yellow green emission
- Water clear resin LED lamp construction
- 400 mcd minimum luminous intensity at 20 mA
- 800 mcd typical luminous intensity at 20 mA
- 10 degree typical viewing angle at 20 mA
- 575 nm typical peak wavelength output
- 573 nm typical dominant wavelength output
- 2.0 V typical forward voltage at 20 mA
- 25 mA continuous forward current rating
- 260°C, 5 second soldering temperature limit
Typical Applications
- Brilliant yellow green status indicators
- Narrow-angle panel indication
- Through-hole LED lamp assemblies
- Low-current visual signaling
- Color-coded equipment indicators
Procurement Notes
When requesting a quote for 333-2SYGC_S530-E2, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does the 333-2SYGC_S530-E2 emit?
The 333-2SYGC_S530-E2 emits brilliant yellow green light. The datasheet lists a typical peak wavelength of 575 nm and a typical dominant wavelength of 573 nm at IF=20 mA and Ta=25°C.
What is the forward voltage for this EVERLIGHT LED?
At IF=20 mA and Ta=25°C, the forward voltage is specified as 2.0 V typical and 2.4 V maximum. The forward voltage measurement uncertainty is listed as ±0.1 V.
What soldering limits apply to this LED lamp?
The absolute maximum soldering temperature is 260°C for 5 seconds. For hand soldering, the iron tip temperature is 300°C maximum with 30 W maximum power and 3 seconds maximum soldering time.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.