Specifications
| Type | Description |
|---|---|
| Part Number | 333-2SYGD_S530-E2-L |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | LED lamp package; package dimension drawing provided, all dimensions in mm, tolerance ±0.25 mm unless otherwise stated; flange height <1.5 mm |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow Green |
| Resin Color | Green Diffused |
| Continuous Forward Current | 25 mA; Ta=25°C, absolute maximum rating |
| Peak Forward Current | 60 mA; Duty 1/10 at 1 kHz, Ta=25°C, absolute maximum rating |
| Reverse Voltage | 5 V; Ta=25°C, absolute maximum rating |
| Power Dissipation | 60 mW; Ta=25°C, absolute maximum rating |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +100 °C; absolute maximum rating |
| Soldering Temperature | 260 °C for 5 sec; absolute maximum rating |
| Luminous Intensity | 40 mcd min, 80 mcd typ; IF=20 mA, Ta=25°C |
| Viewing Angle | 30 deg typ; 2θ1/2, IF=20 mA, Ta=25°C |
| Peak Wavelength | 575 nm typ; IF=20 mA, Ta=25°C |
| Dominant Wavelength | 573 nm typ; IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 20 nm typ; IF=20 mA, Ta=25°C |
| Forward Voltage | 1.7 V min, 2.0 V typ, 2.4 V max; IF=20 mA, Ta=25°C |
| Reverse Current | 10 µA max; VR=5 V, Ta=25°C |
| Forward Voltage Measurement Uncertainty | ±0.1 V |
| Luminous Intensity Measurement Uncertainty | ±10% |
| Dominant Wavelength Measurement Uncertainty | ±1.0 nm |
| Lead Forming Distance | At least 3 mm from base of epoxy bulb; during lead formation |
| Hand Soldering Tip Temperature | 300 °C max; 30 W max iron, soldering time 3 sec max, distance 3 mm min from solder joint to epoxy bulb |
| DIP Soldering Preheat Temperature | 100 °C max; 60 sec max |
| DIP Soldering Bath Temperature and Time | 260 °C max, 5 sec max; distance 3 mm min from solder joint to epoxy bulb |
| Storage Condition After Shipment | 30 °C or less and 70% RH or less; storage life limit 3 months after shipment |
| Datasheet Status | request_only |
Product Overview
EVERLIGHT 333-2SYGD_S530-E2-L is a brilliant yellow green LED lamp built with AlGaInP chip material and a green diffused resin package. The datasheet identifies it as an LED lamp package, with package dimensions provided in millimeters and a general tolerance of ±0.25 mm unless otherwise stated. The flange height is specified as less than 1.5 mm.
Optical and electrical values are specified at IF=20 mA and Ta=25°C. The LED provides 40 mcd minimum and 80 mcd typical luminous intensity, a 30 degree typical viewing angle, 575 nm typical peak wavelength, and 573 nm typical dominant wavelength. Forward voltage is specified from 1.7 V minimum to 2.4 V maximum, with 2.0 V typical.
Assembly handling is defined by lead forming and soldering limits. Leads should be formed at least 3 mm from the base of the epoxy bulb. Hand soldering is limited to a 300°C maximum tip temperature for 3 seconds maximum, while DIP soldering permits 100°C maximum preheat for 60 seconds and 260°C maximum bath temperature for 5 seconds.
Key Features
- AlGaInP chip material for brilliant yellow green emission
- Green diffused resin LED lamp package
- 40 mcd minimum luminous intensity at 20 mA
- 80 mcd typical luminous intensity at 20 mA
- 573 nm typical dominant wavelength
- 575 nm typical peak wavelength
- 30 degree typical viewing angle
- 1.7 V to 2.4 V forward voltage range
- 25 mA continuous forward current rating
- -40 to +85 °C operating temperature range
Typical Applications
- Brilliant yellow green visual indicators
- Panel status indication
- Signal and display lamps
- Through-hole LED assemblies
- Color-coded equipment indication
Procurement Notes
When requesting a quote for 333-2SYGD_S530-E2-L, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does the 333-2SYGD_S530-E2-L emit?
The EVERLIGHT 333-2SYGD_S530-E2-L emits brilliant yellow green light. The datasheet specifies a 573 nm typical dominant wavelength and 575 nm typical peak wavelength at IF=20 mA and Ta=25°C.
What forward voltage is specified for this LED lamp?
At IF=20 mA and Ta=25°C, the forward voltage is specified as 1.7 V minimum, 2.0 V typical, and 2.4 V maximum. The forward voltage measurement uncertainty is ±0.1 V.
What soldering limits apply to the 333-2SYGD_S530-E2-L?
The absolute soldering temperature rating is 260°C for 5 seconds. Hand soldering is limited to a 300°C maximum tip temperature for 3 seconds, and DIP soldering allows 260°C maximum bath temperature for 5 seconds.
What are the current ratings for this EVERLIGHT LED?
The continuous forward current rating is 25 mA at Ta=25°C. The peak forward current rating is 60 mA under duty 1/10 at 1 kHz and Ta=25°C.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.