Specifications
| Type | Description |
|---|---|
| Part Number | EL_DPD-0000061_PD204-6C_datasheet_v3 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Component Type | Sensor |
| Package / Case | Standard 3Φ plastic package; package dimension tolerance ±0.25 mm unless otherwise specified |
| Device Material | Silicon |
| Lens Color | Water clear |
| Reverse Voltage | 32 V |
| Reverse Voltage Condition | Absolute maximum rating, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Operating Temperature Condition | Absolute maximum rating |
| Storage Temperature | -40 to +100 °C |
| Storage Temperature Condition | Absolute maximum rating |
| Soldering Temperature | 260 °C |
| Soldering Temperature Condition | Soldering time ≤5 seconds |
| Power Dissipation | 150 mW |
| Power Dissipation Condition | At or below 25°C free air temperature |
| Spectral Bandwidth Range | 400 to 1100 nm |
| Spectral Bandwidth Range Condition | Ta=25°C |
| Wavelength Of Peak Sensitivity | 940 nm typ |
| Wavelength Of Peak Sensitivity Condition | Ta=25°C |
| Open-Circuit Voltage | 0.42 V typ |
| Open-Circuit Voltage Condition | Ee=1 mW/cm², λp=940 nm, Ta=25°C |
| Short-Circuit Current | 3.5 µA typ |
| Short-Circuit Current Condition | Ee=1 mW/cm², λp=940 nm, Ta=25°C |
| Reverse Light Current | 3.5 µA typ |
| Reverse Light Current Condition | Ee=1 mW/cm², λp=940 nm, VR=5 V, Ta=25°C |
| Reverse Dark Current | 10 nA max |
| Reverse Dark Current Condition | Ee=0 mW/cm², VR=10 V, Ta=25°C |
| Reverse Breakdown Voltage | 32 V min, 170 V typ |
| Reverse Breakdown Voltage Condition | IR=100 µA, Ee=0 mW/cm², Ta=25°C |
| Total Capacitance | 5 pF typ |
| Total Capacitance Condition | VR=5 V, f=1 MHz, Ta=25°C |
| Rise Time | 6 ns typ |
| Rise Time Condition | VR=10 V, RL=100 Ω, Ta=25°C |
| Fall Time | 6 ns typ |
| Fall Time Condition | VR=10 V, RL=100 Ω, Ta=25°C |
| Response Type | High speed, high sensitivity PIN photodiode |
| Spectral Matching | Matched to visible and infrared emitting diode |
| Junction Capacitance Feature | Small junction capacitance |
| Package Diameter Class | 3 mm / 3Φ |
| RoHS Compliance | RoHS compliant version |
| REACH Compliance | Complies with EU REACH |
| Packing Quantity | 200 to 1000 pcs per bag, 4 bags per box, 10 boxes per carton |
| Datasheet Status | request_only |
Product Overview
EL_DPD-0000061_PD204-6C_datasheet_v3 is an EVERLIGHT 3mm PIN photodiode sensor listed in the LED category. The device material is silicon, and the lens color is water clear. It is described as a high-speed, high-sensitivity PIN photodiode with spectral matching to visible and infrared emitting diodes.
The photodiode covers a 400 to 1100 nm spectral bandwidth at Ta=25°C and has a typical wavelength of peak sensitivity of 940 nm. Electrical characteristics include 0.42 V typical open-circuit voltage, 3.5 µA typical short-circuit current, 3.5 µA typical reverse light current at VR=5 V, and 10 nA maximum reverse dark current at VR=10 V.
The standard 3Φ plastic package has a package dimension tolerance of ±0.25 mm unless otherwise specified. Assembly and handling limits include 260°C soldering temperature for soldering time of 5 seconds or less, 150 mW power dissipation at or below 25°C free air temperature, -40 to +85°C operating temperature, and -40 to +100°C storage temperature.
Key Features
- Silicon device material for PIN photodiode sensing
- Water-clear lens in standard 3Φ plastic package
- 400 to 1100 nm spectral bandwidth at Ta=25°C
- 940 nm typical wavelength of peak sensitivity
- 3.5 µA typical short-circuit current at 940 nm
- 10 nA maximum reverse dark current at VR=10 V
- 5 pF typical total capacitance at 1 MHz
- 6 ns typical rise and fall times
- Small junction capacitance feature listed in datasheet
- RoHS compliant version and EU REACH compliance
Typical Applications
- Visible emitting diode detection
- Infrared emitting diode detection
- 940 nm optical sensing
- High-speed photodiode response circuits
- Low-capacitance optical detection
- Water-clear 3 mm sensor assemblies
Procurement Notes
When requesting a quote for EL_DPD-0000061_PD204-6C_datasheet_v3, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of device is EL_DPD-0000061_PD204-6C_datasheet_v3?
EL_DPD-0000061_PD204-6C_datasheet_v3 is an EVERLIGHT 3mm PIN photodiode sensor in the LED category. The datasheet describes it as a high-speed, high-sensitivity PIN photodiode made from silicon with a water-clear lens.
What spectral range does this EVERLIGHT photodiode cover?
At Ta=25°C, the photodiode has a specified spectral bandwidth range of 400 to 1100 nm. Its typical wavelength of peak sensitivity is 940 nm, and the datasheet states matching to visible and infrared emitting diodes.
What are the main timing and capacitance specifications?
The datasheet lists 5 pF typical total capacitance at VR=5 V and 1 MHz. Rise time and fall time are both specified as 6 ns typical with VR=10 V, RL=100 Ω, and Ta=25°C.
What package and assembly limits are specified?
The device uses a standard 3Φ plastic package with ±0.25 mm package dimension tolerance unless otherwise specified. Soldering temperature is rated at 260°C for soldering time of 5 seconds or less.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.