Specifications
| Type | Description |
|---|---|
| Part Number | EL_PD15-22B-TR8 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | Sensor |
| Package / Case | Miniature flat top view lens SMD package, black plastic; package dimensions in mm with tolerances ±0.1 mm unless specified |
| Device Number | PD15-22B/TR8 |
| Chip Material | Silicon |
| Lens Color | Black |
| Reverse Voltage | 32 V, absolute maximum rating at Ta=25°C |
| Operating Temperature | -40 to +85 °C, absolute maximum rating at Ta=25°C |
| Storage Temperature | -40 to +100 °C, absolute maximum rating at Ta=25°C |
| Soldering Temperature | 260 °C, soldering time ≤5 seconds |
| Power Dissipation | 150 mW at or below Ta=25°C |
| ESD HBM Level | Min. 2000 V, absolute maximum rating at Ta=25°C |
| Range of Spectral Bandwidth | 730 to 1100 nm, 10% of λp at Ta=25°C |
| Wavelength of Peak Sensitivity | Typ. 940 nm at Ta=25°C |
| Open-Circuit Voltage | Typ. 0.41 V, Ee=5 mW/cm², λp=940 nm, Ta=25°C |
| Short-Circuit Current | Min. 4.0 µA, Typ. 6.5 µA, Ee=1 mW/cm², λp=875 nm, Ta=25°C |
| Reverse Light Current | Min. 4.2 µA, Typ. 6.5 µA, Ee=1 mW/cm², λp=875 nm, VR=5 V, Ta=25°C |
| Dark Reverse Current | Max. 10 nA, Ee=0 mW/cm², VR=10 V, Ta=25°C |
| Reverse Breakdown Voltage | Min. 32 V, Typ. 170 V, IR=100 µA, Ta=25°C |
| Rise Time | Typ. 10 ns, VR=5 V, RL=1000 Ω, Ta=25°C |
| Fall Time | Typ. 10 ns, VR=5 V, RL=1000 Ω, Ta=25°C |
| View Angle | Typ. 130 deg, 2θ1/2, VR=5 V, Ta=25°C |
| Carrier Tape Quantity | 2000 pcs/reel |
| Moisture Storage Before Opening | ≤30°C and ≤90% RH |
| Shelf Life Before Opening | Within 1 year |
| Storage After Opening | ≤30°C and ≤60% RH |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for minimum 24 hours if silica gel faded or storage time exceeded |
| Reflow Soldering Limit | Maximum 2 times |
| Soldering Iron Temperature | Less than 350°C for 3 seconds, each terminal once, soldering iron capacity less than 25 W |
| Datasheet Status | request_only |
Product Overview
EL_PD15-22B-TR8 is an EVERLIGHT silicon PIN photodiode, identified in the device selection guide as PD15-22B/TR8. It is built with a silicon chip and black lens in a miniature flat top view lens SMD package using black plastic. Package dimensions are specified in millimeters with ±0.1 mm tolerances unless otherwise specified.
The photodiode is characterized for optical sensing across a 730 to 1100 nm spectral bandwidth, with typical peak sensitivity at 940 nm. At Ta=25°C, the datasheet lists typical open-circuit voltage of 0.41 V under Ee=5 mW/cm² at λp=940 nm, and short-circuit current of 4.0 µA minimum and 6.5 µA typical under Ee=1 mW/cm² at λp=875 nm.
Electrical ratings include 32 V reverse voltage, 150 mW power dissipation at or below Ta=25°C, and HBM ESD level of at least 2000 V. Dynamic response is specified as typical 10 ns rise time and 10 ns fall time at VR=5 V and RL=1000 Ω.
Handling requirements include storage within 1 year before opening at ≤30°C and ≤90% RH, then ≤30°C and ≤60% RH after opening with 168 hours / 7 days floor life. Reflow soldering is limited to a maximum of two times.
Key Features
- Silicon PIN photodiode sensor construction
- Black lens in miniature top-view SMD package
- 730 to 1100 nm spectral bandwidth
- Typical 940 nm wavelength of peak sensitivity
- Typical 10 ns rise and fall times
- Typical 130 degree view angle
- Maximum 10 nA dark reverse current
- Minimum 2000 V HBM ESD level
- 32 V reverse voltage absolute maximum rating
- 2000 pieces per reel carrier tape quantity
Typical Applications
- Infrared light sensing
- 940 nm optical detection
- Fast optical switching detection
- Top-view SMD sensor assemblies
- Wide-angle photodiode sensing
- Reel-fed automated assembly
Procurement Notes
When requesting a quote for EL_PD15-22B-TR8, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of device is EL_PD15-22B-TR8?
EL_PD15-22B-TR8 is an EVERLIGHT silicon PIN photodiode. The device selection guide identifies the device number as PD15-22B/TR8, with silicon chip material and a black lens.
What spectral range does this photodiode cover?
The datasheet specifies a spectral bandwidth range of 730 to 1100 nm at 10% of λp and Ta=25°C. The wavelength of peak sensitivity is listed as typical 940 nm.
What response time is specified for EL_PD15-22B-TR8?
Both rise time and fall time are specified as typical 10 ns. These values apply at VR=5 V, RL=1000 Ω, and Ta=25°C according to the extracted electrical-optical characteristics.
What are the package and lens details?
The part uses a miniature flat top view lens SMD package made with black plastic. The lens color is black, and package dimensions are in millimeters with ±0.1 mm tolerances unless specified.
What handling limits apply after opening the package?
After opening, storage is specified at ≤30°C and ≤60% RH. The floor life is 168 hours / 7 days. Baking treatment is 60±5°C for a minimum of 24 hours if silica gel faded or storage time was exceeded.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.