Specifications
| Type | Description |
|---|---|
| Part Number | HL-A-3014H416W-S1-08HL-HR3 |
| Manufacturer | Hongli Zhihui / Honglitronic |
| Product Type | White SMD LED |
| Category | LED |
| Component Type | LED |
| Package Case | PLCC-2, 3.00 mm x 1.40 mm package; recommended soldering pattern shown in datasheet |
| Production Status | Mass production |
| RoHS Compliance | RoHS compliant |
| Package Type | PLCC-2 |
| LED Description | White LED fabricated using blue chip and phosphor |
| Chip Material | InGaN |
| Lens Type | Yellow diffused |
| Moisture Sensitivity Level | MSL Level 4 |
| Packaging Quantity | 4000 pcs/reel |
| Viewing Angle | 120 deg; IF=30mA, Ta=25°C; 2θ1/2 half-intensity angle |
| Forward Voltage | 2.7-3.3 V; IF=30mA, Ta=25°C |
| Color Rendering Index | Ra min 80; IF=30mA, Ta=25°C |
| Reverse Current | 10 μA max; VR=5V, Ta=25°C |
| Luminous Flux Bin at 6000-7000K | 12.5 lm min, 13.5 lm typ; IF=30mA; CCT min 6000K, typ 6500K, max 7000K |
| Luminous Flux Bin at 5700-6500K | 12.5 lm min, 13.5 lm typ; IF=30mA; CCT min 5700K, typ 6000K, max 6500K |
| Luminous Flux Bin at 4750-5300K | 12.5 lm min, 13.5 lm typ; IF=30mA; CCT min 4750K, typ 5000K, max 5300K |
| Luminous Flux Bin at 3800-4250K | 12.5 lm min, 13.5 lm typ; IF=30mA; CCT min 3800K, typ 4000K, max 4250K |
| Luminous Flux Bin at 3250-3650K | 11.5 lm min, 12.5 lm typ; IF=30mA; CCT min 3250K, typ 3400K, max 3650K |
| Luminous Flux Bin at 2800-3100K | 11.5 lm min, 12.5 lm typ; IF=30mA; CCT min 2800K, typ 3000K, max 3100K |
| Luminous Flux Bin at 2600-2800K | 10.5 lm min, 11.5 lm typ; IF=30mA; CCT min 2600K, typ 2700K, max 2800K |
| Power Dissipation | 132 mW; absolute maximum rating, Ta=25°C |
| Forward Current | 40 mA max; absolute maximum rating, Ta=25°C |
| Peak Pulse Current | 80 mA max; 1/10 duty cycle, 0.1 ms pulse width, Ta=25°C |
| Reverse Voltage | 5 V max; absolute maximum rating, Ta=25°C |
| Electrostatic Discharge | 1000 V; HBM absolute maximum rating, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +100 °C |
| Junction Temperature | 115 °C max |
| Allowable Forward Current Derating | 30 mA at 25°C; 15 mA at 85°C |
| Chromaticity Bin CS1 | 6500K target center (cx,cy)=0.313,0.337; a=0.01115, b=0.00475, rotation=58.23° |
| Chromaticity Bin 60-5 | 6000K target center (cx,cy)=0.3220,0.3365; a=0.01179, b=0.00504, rotation=59.21° |
| Chromaticity Bin CS2 | 5000K target center (cx,cy)=0.346,0.359; a=0.01370, b=0.00590, rotation=59.37° |
| Chromaticity Bin NS1 | 4000K target center (cx,cy)=0.380,0.380; a=0.01565, b=0.00670, rotation=54.00° |
| Chromaticity Bin NS2 | 3500K target center (cx,cy)=0.409,0.394; a=0.01585, b=0.00695, rotation=52.58° |
| Chromaticity Bin WS | 3000K target center (cx,cy)=0.440,0.403; a=0.01390, b=0.00680, rotation=53.10° |
| Chromaticity Bin OS | 2700K target center (cx,cy)=0.463,0.420; a=0.01290, b=0.00685, rotation=53.17° |
| Reflow Reliability Test | 260°C max, T=10 sec, 3 times, 22 pcs, Ac/Re 0/1; JESD22-B106 |
| Temperature Cycle Test | -40°C±5°C to 120°C±5°C, 30 min each, 5 min transition, 100 cycles, 22 pcs, Ac/Re 0/1; JESD22-A104 |
| High Temperature Storage Test | 100°C±5°C, 1000 hrs, 11 pcs, Ac/Re 0/1; JESD22-A103 |
| Low Temperature Storage Test | -40°C±5°C, 1000 hrs, 11 pcs, Ac/Re 0/1; JESD22-A119 |
| Life Test | 1000 hrs, 11 pcs, Ac/Re 0/1; Ta=25°C±5°C, IF=30mA, JESD22-A108 |
| High Temperature High Humidity Life Test | 85°C±5°C / 85%RH, 1000 hrs, 11 pcs, Ac/Re 0/1; IF=20mA, JESD22-A101 |
| Failure Criterion - Forward Voltage | max U.S.L x 1.1; IF=30mA |
| Failure Criterion - Reverse Current | 10 μA max; VR=5V |
| Failure Criterion - Luminous Flux | min L.S.L x 0.7; IF=30mA |
| Reflow Soldering Limit | Not more than 2 times |
| Hand Soldering Limit | Below 300°C for less than 3 seconds; one time only |
| Acidic Environment Restriction | Not suitable for PH<7 environment |
| Sulfur Content Restriction | Sulfur element and compound content must not exceed 100 ppm |
| External Glue Halogen Restriction | Bromine <900 ppm, Chlorine <900 ppm, Bromine+Chlorine total <1500 ppm |
| Datasheet Status | request_only |
Product Overview
HL-A-3014H416W-S1-08HL-HR3 is a white SMD LED from Hongli Zhihui / Honglitronic. The LED is fabricated using a blue chip and phosphor, with InGaN chip material and a yellow diffused lens. It is supplied in a PLCC-2, 3.00 mm x 1.40 mm package, with a recommended soldering pattern shown in the manufacturer datasheet.
At IF=30 mA and Ta=25°C, the device is specified with 2.7-3.3 V forward voltage, 120 degree half-intensity viewing angle, Ra 80 minimum color rendering index, and 10 μA maximum reverse current at VR=5 V. Luminous flux bins span 10.5 lm minimum to 13.5 lm typical depending on CCT range, covering 2600 K through 7000 K options.
Assembly and handling limits include MSL Level 4, 4000 pcs/reel packaging, reflow soldering not more than two times, and hand soldering below 300°C for less than 3 seconds one time only. Operating limits include -40 to +85°C ambient operating temperature, 115°C maximum junction temperature, and defined restrictions for acidic, sulfur-containing, and halogen-containing application materials.
Key Features
- White LED using blue chip and phosphor
- PLCC-2 package, 3.00 mm x 1.40 mm
- InGaN chip material with yellow diffused lens
- 2.7-3.3 V forward voltage at 30 mA
- 120 degree half-intensity viewing angle
- Ra 80 minimum color rendering index
- CCT bins from 2600 K to 7000 K
- MSL Level 4 moisture sensitivity rating
- 4000 pcs per reel packaging
- RoHS compliant mass-production device
Typical Applications
- Compact white SMD LED assemblies
- CCT-binned lighting modules
- PLCC-2 LED board designs
- RoHS-compliant lighting products
- Reel-fed SMT production
- White indication and illumination circuits
Procurement Notes
When requesting a quote for HL-A-3014H416W-S1-08HL-HR3, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of LED is HL-A-3014H416W-S1-08HL-HR3?
HL-A-3014H416W-S1-08HL-HR3 is a white SMD LED fabricated using a blue chip and phosphor. The extracted datasheet facts identify it as an LED component in a PLCC-2 package.
What are the main electrical ratings for this LED?
At IF=30 mA and Ta=25°C, the forward voltage is 2.7-3.3 V. Absolute maximum ratings include 40 mA forward current, 80 mA peak pulse current, 5 V reverse voltage, and 132 mW power dissipation.
Which color temperature bins are listed for this part?
The datasheet facts list CCT ranges from 2600-2800 K through 6000-7000 K. Luminous flux is specified by bin, from 10.5 lm minimum at 2600-2800 K to 12.5 lm minimum at higher CCT ranges.
What assembly limits apply to HL-A-3014H416W-S1-08HL-HR3?
The part is MSL Level 4 and supplied as 4000 pcs per reel. Reflow soldering is limited to not more than two times, while hand soldering must be below 300°C for less than 3 seconds and one time only.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 31, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.